Need to accept VPN connections from "Any"

I had previously been using two WRV54G wireless routers to establish a site to site VPN connection between a branch office and our corporate Headquarters. Because of the limited DHCP scope configuration options, I decided to "upgrade" to the WRVS4400N devices. I have now been able to establish the VPN again between the two new boxes but I've now gotten to the point where I would like to add an additional remote site. In the WRV54G, it was easy to configure the one at HQ to accept connections from "any" but this new router does not seem to be as simple.
Oh yeah, I am running firmware version 1.1.03 on both routers.
Does anyone have any idea how I can set up the HQ router to accept VPN connections from "any"?
Thanks! I appreciate the help.

And this is the VPN log on the HQ router:
Mar 4 11:11:39 - [VPN Log]: "gatekeeper": cannot initiate connection without knowing peer IP address (kind=CK_TEMPLATE)
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: no acceptable Oakley Transform
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: no acceptable Oakley Transform
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: no acceptable Oakley Transform
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Thanks much.

Similar Messages

Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!

You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html

What do i need to access my files from any internet connection

I'm a bit confused, i've found some good videos on youtube on setting up the server but can't get the file shareing to work (of course the only reason i got the server). Some have told me i need a dyns routing service, so i used machighway.com but i still could not connect to my server from any internet conection outside of my home wifi. Now i've been told that i need VPN to be able to do that. So i'm hoping that someone can help clear this up and point me in the right direction. I can connect to the server using my Mac book air over my wifi (using an airport extreme). please help, i've had this server for half a year and have yet to be able to use it for what i intended.
(i upgraded the server to OS X Mountan Lion, and upgraded the app to OS X Server)

Here's how I did it.
-Open a free account at no-ip.org
-Download their app, change your server's hostname to the hostname you selected for your brand new no-ip.org account. Ideally you'd perform this step on a clean install of the Server since changing the hostname can mess a lot of the services up.
-You'll be able to tell it's working by enabling the Websites service and visiting your new no-ip.org hostname in a web browser. You should see the default server page.
If you have follow up questions for me, I don't read this forum much but I am on reddit a lot and I'm trying to start a new subreddit for mac servers: http://reddit.com/r/macserver . Post a thread on there.

SSLServerSocket that only accepts client connections from localhost

My end goal is to create an SSLServerSocket that will only accept client connections requested by localhost.
I've tried creating a new SocketPermission:
p1 = new SocketPermission("localhost:1024-65535", "listen,connect,accept")I am able to add it to a custom Policy's PermissionCollection, but it doesn't seem to work. I believe SecurityManager.checkAccept() only checks the host's name and not the client's...
This following code works and illustrates what I'm trying to achieve, but I'd like it to happen before the socket is actually accepted:
SSLSocket socket = (SSLSocket)m_sslServerSocket.accept();
Strintg clientIP = socket.getSession().getPeerHost();
if( !clientIP.equals( "127.0.0.1" ) & !clientIP.equals( InetAddress.getLocalHost().getHostAddress() )
// reject connection
}Any help is appreciated.
Edited by: misterE on Oct 24, 2007 10:46 PM

I'm not clear whether you are doing this Permission thing on the server side or the client side, and/or whether you have a SecurityManager installed.
If the server only has SocketPermission("localhost:...", "listen,connect,accept") it should only accept connections from localhost, not from B. So I don't know why the first scenario worked.
If the server only has this SocketPermission with some other hostname, it shouldn't be able to listen at any port. So I don't know why the first scenario worked.
Unless there is no security manager installed.
You can run it with -Djava.security.debug=access,failure to see what permission checks are being executed.
BTW because connections are accepted by the TCP stack before permission checking takes place, as described above, the client won't get a ConnectionException if the permission is refused at the server: it will get most probably a SocketConnection: connection reset by peer when writing to the server.

What do I need to open a connection from the Linux box to the Oracle server

Hi all,
I want to access oracle database from java application running on Linux.
The database is installed on a Window 2000 machine. What do I need to install before I can open a connection from the Linux box to the Oracle server on Windows 2000 ?
Do I need Oracle Client ?
Thanks,
Quoi

Hi Quoi,
http://myjdbc.tripod.com/basic/jdbcurl.html
Talks abt how to write a jdbc url and the jar + config required to connect to db. Also has a sample program to connect.
Regards
Elango.

VPN Connectivity from Mac to Windows Server

I have been using Windows OS all my life, now I recently bought a new Mac machine, and it my first time using Mac OSX Lepord, so I don't no much, I tried to connect my Mac to a VPN - windows using the mac VPN Connectivity provided which uses tunneling Protocol, I am successful in establishing connectivity to windows server, but the problem is, it still uses ip address assigned by the router while rowsing, and not the ip address of the VPN machine while browsing sites, the reason I use VPN connectivity is to bypass ISP who blocks most of the useful sites. I tried to set proxy setting in my safari browser, but failed and also automatic proxy does not work, can someone hep me and tell me how to achieve what I am trying to achieve using MAc.

exero –
Though this will be a pain it will help trace down the problem.
Since you are attempting to VPN to the SBS what happens if you connect the Mac locally dose RDP connection map the drives and can you map to the SBS shares directly?
What happens if you try connecting with a PC via the VPN?
Also (though risky) I would open all the ports on your firewall that point to the SBS and try connecting to the VPN again with Mac and see what happens. (Don’t forget to close them back).
Below are two links that may provide some additional information. The first is from Microsoft and list all of the ports used by MS products. The second one is a public post that focuses on SBS 2003.
http://www.microsoft.com/smallbusiness/support/articles/refnet_ports_msprod.mspx
http://www.howtonetworking.com/sbs/rwwports.htm
Best of Luck –
BH

Need to test db connectivity from Oracle 8.1.6 NT client

Our applications run on Windows NT servers and connect to the Oracle db server through an Oracle 8.1.6 NT Client. The Oracle db server is running Oracle 8.1.6.2 on HPUX 11.0. I am using commands in a batch file to restart the application services on the NT server when the database is brought down. Before starting the services back up I need to be able to make sure that the database is up. I was using the tnsping command to do this, but I found out that tnsping gives an 'OK' response when the listener is running and the database is down. I need something that works like tnsping, but tests for connectivity to the database, not just the listener.
I appreciate any help anyone can give me.
The following is the code from the batch file:
REM ******************************************************
REM Stop the TM Proc Mon Service
net stop TMProcMonSrvc
REM ******************************************************
:CHECKDB
REM Check the connectivity to the database
tnsping tm52ut
REM Check to see if the tnsping was successful (=0)
IF %ERRORLEVEL%==0 GOTO STARTTM
GOTO CHECKDB
REM ******************************************************
:STARTTM
REM Start the TM Proc Mon Service
net start TMProcMonSrvc
REM ******************************************************
:EXIT
exit

Use sqlplus. Use a bogus username/password (if and watch out for the Invalid username error. If you get an invalid username/password error then the db is up else it is down. Suggestion: It would be much easier to write a wsh script that uses ADO to connect to the db. Batch files do not give you much control over the shell.

Vpn connection from administration win server 2012 r2

hello every one i have win server 2012 for the connection vpn i need make setting as like subnetwork get access to the from main office to the district office?

Hi,
Can you ping normally to other server from your server 2012 R2?
Does user has enough permission for remoting?
Can you telnet port 3389 and see whether RDP port is opened?
Please try to perform remote desktop with “mstsc /admin” switch and check the result. Addition try to perform the remote session with IP address specified for that server. Also you can try PowerShell command to enable remote desktop.
set-ItemProperty -Path 'HKLM:\System\CurrentControlSet\Control\Terminal Server'-name "fDenyTSConnections" -Value 0
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Sony RPLCD TV not accepting HDMI connection from AppleTV

I have a rear projection LCD Sony KDF-55wf655 TV and have had it for years. I had my ATV hooked up to the TV through an HDMI switch in my AV closet. All was good, everything worked perfectly. I then decided to move my components out of the closet and under the TV. So now I have everything connected, just close to the TV. I cannot get the Sony TV to display the output from the ATV over HDMI. I connect the ATV via component and it works great. I take the ATV upstairs to my plasma and HDMI works great. I tried resetting the ATV to factory settings, didn't work. I tried resetting the Sony TV, didn't work. I tried unplugging and replugging everything in every order, didn't work. I'm not sure what else to do, but it seems it's something in the Sony TV not allowing the HDMI connection now...but why? What can I try? I'm desperate.

Anyone have any ideas I can try? Still would love to get HDMI working from my appletv on this one set. My Panasonic plasma has no issues playing HDMI from my ATV.

McAfee frequently warns me that Firefox is trying to accept incoming connections from the Internet and asks me whether or not I want to allow or block this - what is this all about?

I cannot find any reference to this sort of activity by Firefox on your website. It is an '.exe' program location and McAfee warns me that "Hackers can use programs to steal your personal information or hijack your PC".
Can you please confirm that these incoming connections are legitimate Firefox activity, and if so please explain what they are, why they are required by Firefox and why there appears to be no reference to this activity on your website. Many thanks.

Hi Cor-el,
Thanks for your response.
No, unfortunately McAfee does not give any more detail as to the origin of these incoming connections - is there a way to find out from McAfee?
I would have thought that Mozilla Firefox should have the answers, but I have been unable to find any reference to this issue on their website, Help section etc.
Could it be the way my Options are configured? - although I've not changed them from the Default settings as far as I can remember.
Cheers,
GWhatsitworth.

VPN connection from Mac at home to pc network at work

Hope someone can help as I'm lost on this..... Was using a pc laptop and had basic settings to connect to my work network: IP address of the VPN concentrator (Cisco 3000), username and a password.
Have now upgraded (at least I thought it was an upgrade!?) to MacBookPro 2.6 using 10.4.11 and tried to connect using Mac VPN with no success so tried IPSecuritas which seems like over kill but still no luck. Guess I am no use at networking!!
Any advice would be most welcome.

Last time I worked with the Cisco 30xx series (which, admittedly, was a few years ago), it only supported the Cisco client. Have you installed the Cisco client and tried?

Lynksys E900 Wireless-N300 Router - Help needed to share internet connection from PC to home network

Hi, I'm hoping someone can help me out with a problem I have:
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?
To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router, although if anyone has any ideas how to do this I'd love to hear!
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE? Any help or suggestions would be greatly appreciated! PS: both PC's are running on Windows 8

I have Cisco Linksys E900 router. I want to make my home Wi-Fi zone. But I don’t have Static IP. One more thing is that Service provider have web page Authentication. I have username and pass.
I am able to make SSID and security for my WI-FI LAN. I can use internet on one device. If I tried from second device again it’s asking me for username and password. While login it’s showing your first session in not logout. (Means I have to logout from 1st device and have to login on 2nd device.)
Is there any option that I can Use my all devices at same time?

Safari and Firefox hangs and won't accept online download from any sites

My Safari and also Firefox won't download or process to download everytime I try to download a new update from a site or a software...ect. They do process to the download and then just hang there for a long long time and no download window appear asking for anything.

Neros --
You need to email Yazsoft at Speed Download site,
and ask them for an UNinstaller.
It's still there somewhere, messing things up.

VPN connection from E61i

I would like to know how to connect to my corporate network using VPN capabilities of E61i.
MY corporate network is on cisco platform with ASA firewall serving as VPN concentrator.
With Regarsd,
Maqsood

See my reply here:
/discussions/board/message?board.id=connectivity&message.id=5038

Windows 8.1 Pro Need command to disable "Use default gateway on remote network" option on VPN connection"

Hello!
I want to create bat script to create several VPN connection.
There is powershell command to create vpn connection:
add-vpnconnection -name "Test VPN" -serveraddress "vpn.example.com" -splittunneling -tunneltype "pptp"
And I need to create VPN connection without the option "Use default gateway on remote network" option on VPN connection"
Or modify this option on existent VPN connection with command.
Please help me to find command option or other command to disable "Use default gateway on remote network" option on VPN connection" feature.

http://technet.microsoft.com/nl-nl/library/ee431701%28v=ws.10%29.aspx RouteIPv4TrafficOverRAS True – Add a default gateway on the VPN connection False – Do not add default gateway on the VPN connection

Need to accept VPN connections from "Any"

Similar Messages

Maybe you are looking for