Need to Access the dvd on another computer

I need to access a dvd player on another mac to install some software and i have followed the apple instructions below for sharing another computers dvd and everything works until its time for me to select remote disk under devices...there is nothing there to select...The other mac shows that it is sharing it dvd player...the internet connection is working as i am able to share that computers screen but cant get it to provide me with "remote disk"...any thoughts?? I do not have an internal DVD player it has been turned into a second hard Drive...thank again
To access a DVD or CD on another computer:
Make sure both computers are on the same network (wired or wireless), and the DVD or CD Sharing software is installed on the computer with the optical drive.
Make sure the computer with the optical drive is set up to share the disc.
On a computer with Mac OS X v10.4.10 or later: Choose Apple menu > System Preferences, click Sharing, and then select the “DVD or CD Sharing” checkbox. Select “Ask me before allowing others to use my DVD drive” if you want to be notified when a computer tries to access the drive.
On a computer with Windows XP or Vista: Open the DVD or CD Sharing control panel and select “Enable Remote DVD or CD.” Select “Ask me before allowing others to use my DVD drive” if you want to be notified when a computer tries to access the drive.
Insert the disc into the optical drive.
On the computer without the optical drive, select Remote Disc under Devices in a Finder window sidebar. If you see the “Ask to use” button, click it.

If you are using two Macs you can try to do this via Target Disk Mode. Info here:
http://docs.info.apple.com/article.html?artnum=58583

Similar Messages

  • Need to access a dvd on another computer

    I need to access a dvd player on another mac to install some software and i have followed the apple instructions below for sharing another computers dvd and everything works until its time for me to select remote disk under devices...there is nothing there to select...The other mac shows that it is sharing it dvd player...the internet connection is working as i am able to share that computers screen but cant get it to provide me with "remote disk"...any thoughts?? I do not have an internal DVD player it has been turned into a second hard Drive...thank again
    To access a DVD or CD on another computer:
    Make sure both computers are on the same network (wired or wireless), and the DVD or CD Sharing software is installed on the computer with the optical drive.
    Make sure the computer with the optical drive is set up to share the disc.
    On a computer with Mac OS X v10.4.10 or later: Choose Apple menu > System Preferences, click Sharing, and then select the “DVD or CD Sharing” checkbox. Select “Ask me before allowing others to use my DVD drive” if you want to be notified when a computer tries to access the drive.
    On a computer with Windows XP or Vista: Open the DVD or CD Sharing control panel and select “Enable Remote DVD or CD.” Select “Ask me before allowing others to use my DVD drive” if you want to be notified when a computer tries to access the drive.
    Insert the disc into the optical drive.
    On the computer without the optical drive, select Remote Disc under Devices in a Finder window sidebar. If you see the “Ask to use” button, click it.

    If you are using two Macs you can try to do this via Target Disk Mode. Info here:
    http://docs.info.apple.com/article.html?artnum=58583

  • Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

    Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD? 

    When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
    The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

  • HT1727 My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again.

    My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again. I just want to be able to get all of my music that I bought on itunes onto my computer. Right now the money ive spent is just gone and I have no music to show for it.

    Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

  • HT1420 when I try to import music from my old computer i get an error message that says authorization is needed to access "the song"

    I am trying to import my music on my old laptop to my new laptop using Home Sharing both computers are authorized however I can't seem to import due to an error message that says authorization is needed to access "the name of the song"  Help.

    If they were ripped from CD's there is no authorization.
    Were they possibly purchased with a different Apple ID?  If so, you'll need to authorize the computer for that Apple ID.

  • HT4061 How do I access the songs I have uploaded to the cloud from another computer?

    How do I access the songs I have uploaded to the cloud from another computer?

    oliversdaniel wrote:
    How do I access the songs I have uploaded to the cloud from another computer?
    So you purchased iTunes Match? Enable iTunes Match on your other device.
    This is the only way to upload.

  • Can i access my account and use the programs on another computer?

    can i access my account and use the programs on another computer? i would like to be able to use both my laptop and my desktop

    yes, you are allowed concurrent installations and activations on, up to, two computers.
    by signing out of one, you can activate on a third etc.

  • While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari?

    While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari again? Each time I type in "facebook", it will not load.

    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click Details then type facebook in the search field then remove all facebook related items.
    Now empty the Safari cache. Press Command + Option + E on your keyboard.
    Quit and relaunch Safari. Try accessing your Facebook page.
    If that didn't help, click History from the Safari menu bar then click Clear History.
    Quit and relaunch Safari and try Facebook again.

  • How to access Enterprise manager from another computer

    Hi There,
    I have Oracle 10g installed on a PC. I can access EM from that PC.
    I would like to know how would I access EM Dbconsole from another computer under same LAN.
    Thanks
    Raf

    Opening the web browser, you can specify the hostname and the port configured to listen the incoming call.
    For example:
    https://hostname:port_number/em
    or
    https://ip_address:port_number/em
    you can get information about the information that you need from the "emctl"
    emctl status dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    https://hostname:1158/em/console/aboutApplication
    Oracle Enterprise Manager 11g is not running.
    Best regards !
    Shin-Iti.

  • Need inputs regarding the dvd drive on primary ide channel.

    Specs:
    Motherboard: MSI P35 Neo3 (MS-7935 1.0)
    CPU: Intel Core2 Duo E6550
    Memory: Team Elite DDR2800 (2x1GB Dual Channel)
    Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
    Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
    Graphics card: Gecube HD3870
    Chipset: Intel P35/G33/G31 (Rev. A2)
    Southbridge: Intel 82801IB (ICH9)
    LPCIO: Fintek F71882F
    BIOS: AMI V1.1 (11/07/2007)
    Hello,
    Almost all new motherboards today only have a primary ide channel and the rest are SATA.
    I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
    I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
    Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
    Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
    I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
    I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
    Thank you for any replies.

    Thanks sir NovJoe for the reply.
    Just received the solution from another forum where I posted the same problem.
    They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
    Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

  • Need help accessing the router web page.  I have been tol...

    Need help accessing the router web page.  I have been told my router is acting like a switch and the IP address is not in the proper range.  I have tried reseting the router (hold for 30 sec and unplug for 5 mins).  Didn't work.
    thanks

    What router are you using?  Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS  (not the WRT54GS).
    You need to try again to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    Message Edited by toomanydonuts on 01-21-2008 04:40 AM

  • How to access my mail from another computer. Both iPads

    HHow to access my mail from another computer. Both iPads. Both iCloud.

    add the email account to your email software like with any email service, or go to www.iCloud.com

  • Friend of mine bought movies(ITunesStore)one of the 5 devices that she could use is my Mac.She needs to use the movies on another device and for that I have to erase them,how do I do that?I deleted them but she can't still used them?How delete themsurely?

    Friend of mine bought some movies (ITunesStore) one of the 5 devices that she could use them in is my Mac. She needs to use the movies on another device and ask me for delete the conection in my laptop.  For that I erase them in Itunes, but she can't still used them? How delete the conections between my computer and her account?
    Thank you for your answer.

    Hello there, Ingridvon.
    The following Knowledge Base article provides the information you are looking for:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I access my email from another computer. Both iPads.

    HHow to access my email from another computer. Both iPads.

    depend on the mail provider really this sub forum is about installing windows on mac computer though you may get more advice if you post your question in the ipad forum
    Using iPad

  • TS1717 can i download  itunes to a flash  drive and install the program on another computer?

    can i download  itunes to a flash  drive and install the program on another computer?

    erinjb1981 wrote:
    do you know how to install it w/out administrator access? is that even possible?
    Only if the computer was set up to allow installs without admin privileges.

Maybe you are looking for