Need to activate enhancement manually in testing system

Hi,
I met a very weird issue in our testing system.
When we moved the implicit or explicit enhancements from development system to testing system, it did not work.
We needed to manually activate the enhancement --> then it worked.
Please advice if you met or knew the issue.
Thanks,
Khanh

Close!
No answer!

Similar Messages

How to configure Test System

Hello Guys,
I want to some guidelines to install and configure the SAP NWCE as Test System. Any link or documentation would be encouraged.
Regards,
Naeem

Hi Naeem,
The SCAfiles for the ESR comes along with the CE package, you need to deploy those SCA files on NWDS in order to access ESR which is a part of the CE installation process, though I undestand your point that it is not required unless you need ESR/SR. The NWDS accesses ESR and SR to deploy the EAR files for the service Interfaces created on ESR/SR on the Java server from where the services would be accessed in run time. I think you don't need the ESR/SR in the test system unless it would be used by the PI system as well (if you have one in your landscape), as NWDS accesses the ESR once to get the service interface and then deploy it on Java server. and the deploed EAR files can be transported to the Test environment. having said that, you should have ESR/SR in your landscape as you would like the DEV, QA, PRD systems in sync.
On your other question, NWDS accesses the ESR/SR to get the service interfaces and create ear files for the interfaces and deploy them on the Java server and used at runtime.
Hope it helps.

Sap test system needed / sap test system gebraucht

Hi,
maybe somebody of you could give some hint where I can find a test system for sap in a downloadable version 4.5 upwards. I have an sap mini basis system (mbs) in the version 4.6 (c) , but no valid license key on hand due to the fact that the old one has expired and there would not be any new license key available from sap company itself because of already having done the steps up to the latest version.
If somebody could also advise where to find sap test versions in between 4.5/4.6 and the latest it would fantastic to get to know - I need an test environment for abap programming in the first place.
Thanks in advance to you...!
Best regards and wishes !!!
Hallo,
vielleicht gibt es jemand, der mir sagen kann wie oder wo ich ein Testsystem für die ABAP-Entwicklung bekommen kann.
Ich habe für Windows bereits ein MiniSAP-System in der Version 4.6 (c), bei der der Lizenzkey aber nicht mehr funktioniert, da abgelaufen.
Falls mir jemand einen Lizenzkey für diese Version zur Verfügung stellen kann, wäre mir vorerst sehr damit geholfen.
Aber nichtsdestotrotz würde mich eine neuere Test-Version von SAP sehr interessieren. Falls mir jemand hiervon eine Kopie geben kann oder einen Hinweis darüber wo gebührenfrei oder kostengünstig eine solche zur Verfügung steht oder gestellt wird, wäre ich sehr froh darüber, da sich sicherlich seit 4.6 schon ein wenig geändert haben wird, in Menüs u.a. .
Danke im Voraus für eine Antwort auf meine Frage!!
Viele Grüße!!

Hi again,
during installation the java installation folder needs to be selected. After having chosen this the installation aborts by showing a message with the options retry, view log, stop.
This message is generated:
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AntiVirSchedulerService' does not exist on the 'localhost' host.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Programme/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Also some message about my anti-virus software came up saying that there is a problem with with localhost. I have now deinstalled all java from my computer to plainly install the version needed: version jre 1.4.2.x, but I can't find this version in the internet, I mean not in the way that it is obviously the right version. Some description says j2se and other more even though I was googleing for jre 1.4.2 download.
Is there anybody who can advise?
Thanks for any hint.
Best regards
Guido
Edited by: Guido Messer on Aug 5, 2009 3:31 PM

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

My motherboard went out and I got a new computer and I need to deactivate Pro X from the old system and activate it on the new system. How is this done?

My motherboard went out and I got a new computer and I need to deactivate Pro X from the old system and activate it on the new system. How is this done?

Hi David ,
If it is a retail version ,then you need to deactivate it and uninstall it as well from your old computer and then you can install it back on the new computer.
If it a subscription based software ,then you just need to deactivate it and you can operate the same on your new computer by entering in your credentials .
For more information ,you can refer to this link.
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Regards
Sukrit Dhingra

Need SAP Test System

My company is building a specialized Java based systems integration tools. We want to test it with SAP. For now, we just want to build a demo that uses Java to invoke BAPIs that manipulate customer/order data.
How can we get an SAP test system set up to do this kind of thing? Is there a trial software program or a developers license?

Welcome to SDN.
You can download trial ABAP system from the following link. (its in downloads->SAP Evaluation Software->Web AS)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
if you have issues with installing and configuring you can get help from the following forums
SAP NetWeaver Application Server
Software Downloads
Regards
Raja

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

BSP pages in test system after transport have same URL as development

Hi. I have just transported some BSP's from our development into our test system and have encountered a problem.
The URL's of each page is the same as it was in the development system, so when we try and use the pages in the test system we get a "service can not be reached" error.
I am relatively new to BSPs and this is the first time I have transported them. I presumed the URL would update to reflect each server.
Have I missed a setting or something? I searched on SDN but could not find a similar post.
Thanks a lot for your help.
Regards,
Dave.

Hi,
check whether the service is active in transaction SICF
(it may become inactive, when there is patch applied, upgrade , etc)
then you will get one screen there then what you need to do is
without entering anything just click execute and expand the tree to
default_hots->sap->bc->bsp->sap-> under this node you should be able to see your BSP name . right click on it and click activate.
here The BSP Name is nothing but the BSP Application name. When you create a BSP applicaiton, a SICF service is created along with the BSP application. All the request that the user makes to this BSP application is processed by the service only with the help of this corresponding SICF service.
regards
Bhavana

How do CVI7.0 runtime engine and TestStand3.0 runtime engine work in a test system?

I developed code modules from CVI 7.0, and test sequence from TestStand 3.0. Now I want to deploy all to a test system. Should I create distribution kits for CVI and TestStand, and install to a target PC? Do each kit include the RTE? How do the runtime engine work in a system?

hp7550,
I saw your post earlier entitled "what is a run-time engine?". It looks like this post is addressing the same issue.
To answer your questions, it is not necessary to create a distribution kit for your CVI code modules. You can simply install the CVI Run-time Engine, which you can find if you go to www.ni.com and click on the Drivers and Updates link on the left-hand side.
Then you will need to deploy your TestStand system using Tools >> Deploy TestStand System in the Sequence Editor. That tool will go out and gather all the CVI code modules your sequence calls - unless you are calling a DLL or something dynamically inside of a code module; in which case, you need to add that dynamically called DLL (or code module) to your TestStand workspace.
To install the TestStand Run-time Engine, make sure the Install TestStand Engine option is checked on the Installer Options tab of the deployment utility. You can customize what gets installed with the engine by clicking on the Engine Options.
For more information on deployment, see Chapter 14 of the TestStand Reference manual (Help >> Search the TestStand Bookshelf...).
To answer your last question a run-time engine simply gives you access to the compiled code that corresponds to the functions you used from the CVI or TestStand libraries during development.
I hope that helps.
Best Regards,
Matt P.
Applications Engineer
National Instruments

I cant activate my web sharing in system preferences

I cant activate my web sharing in system preferences, what do I do ?
tks for help...

Here's a quickly copy and pasted excert from David Pogue's book, Lion: The Missing Manual...
Firing Up Web Sharing
Here’s how you turn your Mac into a low-budget Web site: Put the HTML documents, graphics, and files you want to publish into your Home → Sites folder. Every account’s Home folder has a Sites folder, and therefore the Mac can actually serve up lots of Web sites at once. Your Web site’s home page, by the way, won’t appear unless it’s named index.html. (Apple has already put an index.html document into your Sites folder, just to give you the idea; feel free to replace it.) And the other files you put in Sites aren’t accessible unless they’re linked from your index.html page.
Open System Preferences; click Sharing. Turn on the Web Sharing radio button.
Use the Sharing System Preferences pane to make designated folders on your hard drive available to anyone on your network. Note that your Mac’s IP address, shown here in underlined type, works only when people connect from across the local network. It probably won’t work from across the Internet; see the box on the facing page. You’ve just made the contents of your Sites folder available to anyone who connects to your Mac. Also note the line below the Computer Name box. That’s your Mac’s Bonjour name, which is a bit friendlier than its IP address. Send your network address to your friends and coworkers
People on your local office network can use your Mac’s Bonjour name to connect. It appears at the top of the Sharing pane, as shown in Figure 22-1. For example, your colleagues can type http:// office-mac.local/ ~ chris into their Web browsers, where office-mac.local is your Mac’s Bonjour name and chris is your short user name. If other people will be connecting from the Internet, you need to figure out your public IP address; as noted in the box on The IP Address Mess: Port Forwarding, that might be your router’s IP address, not your Mac’s. Your Mac Web site’s address might be, for example, http:// 111.222.3.44/ ~ chris/ (the number is your public IP address, and the name should be your short user name). Don’t forget the final slash. Tell your friends to bookmark it so they won’t have to remember all that. You’ve just put your Mac-based Web page on the Internet for all to see— that is, all who know your secret Web address. Maybe you’ll want to distribute the address only to other people on your office network, using your tiny Web site as a distribution source for documents. Or maybe you’ll want to go whole-hog, hosting an e-commerce Web site (read on). The Mac’s Own Web Site The instructions above show you how to create a Web site in your Home → Sites folder. In other words, they guide you through the process of creating a personal Web site. But if you have an Administrator account (Chapter 12), you can also put your Web pages into the main hard drive window’s Library → WebServer → Documents folder. This is your Mac’s main Web site folder, and its address is simply, for example, http:// 111.222.3.44/. That is, it’s just your public IP address, no user name needed. (Here again, if people will be connecting from across your office network, they can replace the IP number with your Mac’s Bonjour name.) Working with this primary Web site folder is only slightly different from the personal ones described above. Because you’re now working inside an official Mac OS X system folder, you must mind your permissions. Using the File → Get Info command, you should set up the permissions of any folders and documents inside the Library → Web-Server → Documents folder (an Images folder, for example). That way, you can ensure that you’re in control of which visitors are allowed to do what with your Web documents. The Easiest Way to Distribute Files Here’s a handy secret: If there isn’t a document whose name is index.html in your Sites folder (or index.html.en in your Library → WebServer → Documents folder), then visitors see, in their browsers, a handy list of the files that are in that folder (see Figure 21-2). This is a terrific convenience: It offers a quick, simple way for you to make a bunch of documents available for downloading. All your visitors have to do is click one of these file names. It downloads immediately, no matter what kind of computer your Web visitor is using.
Pogue, David (2011-10-19). Mac OS X Lion: The Missing Manual: The Missing Manual (pp. 816-817). OReilly Media - A. Kindle Edition.
Maybe this will help? It will at least bump the message up again!
Clinton

Cant find my file in Test system JDI

Hi ALL,
SORRY FOR LONG DESCRIPTION, BUT I WANTED TO EXPLAIN THE PROBLEM CLEARLY.
I have installed and configured JDI SP9 on WAS 6.40 SP9. I think there is not much difference between scenario 2+ and 3 configuration wise.. only difference is follow on tracks..for that i think not much config is needed.. anyhow we planned to implement scenario 2+ for time being. everything went smooth..didnt find many errors.. but we are missing to accomplish the goal
1. After importing Development config and adding a webmodule DC and enterprise application DC to SC. when I say checkin, It checks in all the files to DTR and what does "activate" do, I see that a central build is performed here. Is this the point where the files get deployed into my Development server? (please let me know). if so as what files will this be deployed into my server (if I am not wrong .sda ?? )
2. I already created Domain, Track and in runtime systems tab, I provided DEV,QA and PRD. following from the prev step, I released my activite from NWDS, which I was able to see in CONSOLIDATE tab in status "waiting for import" . and i clicked on import and the status changed to "import finished".
3. then it is turn of assembling. so it was here in "waiting for assembly" I selected my comp and clicked on "assemble component" and the status changed to "assembled".
AFAIK an SCA file will be formed in this step. I have seen this SCA file in JDI SYSTEM. /jtrans/archives.
Next, I clicked on TEST tab, but I didnt find this file there in status "waiting for import".. why is it so?
Let us think Assembly failed, if so, why did it showed me status assembled in assembly tab. and what would be the reasons that an assembly would fail?
4. anyhow my next trail was when assembling, this time i selected a checkbox "assemble even with inconsitencies".. so it changed to "assembled" state. and I could see this one in /Jtrans/archives and also it was in TEST tab with status "waiting for approval". then i clicked on import and it changed to "import finished". Then i searched for this file in Test system, but I didnt find this file there.
Experts, Please throw your suggestions
Thank you

Hi Shiva,
1. Activate process triggers a Central Build and it copies the sources from the inactive workspace in the DTR to the active workspace if the build is successful.No its is not at this point where your file is deployed. It is only after you release the activity for transport and then you import is your application deployed to the relevant runtime system.
3. Once you assembled your component and it did not show in the TEST tab then you should have checked the logs of the previous assembly that you did. This you can do by clicking the history button then select the relevant row in the table displayed and clicking the Details button. Under the Logs tab you will get all the logs and will show exactly where the assembly may have failed.
4. Again after you imported the component in the TEST system you should have gone in the history selected the relevant line in the table and clicked on the Details button. Under the logs tab you will find what all steps were executed and whether any step failed. You will also get a detailed explaination as to why the build failed.
If the logs show success then you can log in to Visual Admin and check whether your application has been deployed in the TEST runtime system.
Hope this helps.
Regards
Sidharth

Testing system.capabilities.hasAudio

Hey all,
I need to figure out if a client has the ability to hear audio. As it stands, my project breaks for users without sound cards. I am using hasAudio to change to a different mode that does not rely on audio, but can't get hasAudio to fire false. I can't disable my onboard card from the bios and stopping the services and disabling drivers isn't helping.
Does anybody know how I can test hasAudio?
Thanks

Hi,
You can try two options.
The first would be to transport these inactive objects again.
Second would be to try activating them again directly.
Refer SAP Note 1056060 - DataSource: Reactivation in the production system
OR
Try T-code RSDS to activate all the datasources assigned to one sourcesytem.
Enter * at datasource field and enter sourcesytem name at the respective field and execute.
RSDS_DATASOURCE_ACTIVATE_ALL (Not sure if it works)
how to activate the DS in production system after the replication
Then program RS_TRANSTRU_ACTIVATE_ALL comes into picture only when you need to activate the transfer structures.Ideally this comes after a support pack upgrade/maintenance/transport issues or in case your data load failed due to time stamp error. As a pre requisite you replicate the data source in BW then perform this activity.
RS_TRANSTRU_ACTIVATE_ALL - to activate transfer structures (Input parameters: SystemID, techn.Name Transfer Structure, For master data using direct upload the infosource name is the name of the info object itself.)
Note: This program is not useful in creating a new Transfer Rule. You can activate one that is already existing.
The infosource is always assigned to a datasource with respect to a source system.
There for if you give the infosource and source system information the system knows which datasource is assigned to the relevant infosource.
Hope this helps.
Thanks,
JituK

Modified version is differant from active for ds in test system

Modified version is differant from active version in test system for ds 0FI_AA_12 (unequal sign close to ds).
Once I try to load data to PSA , the system generates the following error :
ds is not replicated
I replicated ds many times , re-transported it but nothing helps

Hi,
After you replicate the datasource,it will become inactive and so you need to activate it again.
Always replicate first and then activate.
Hope it clarifies

Activate IS Automotive on Discovery System

Since IS Automotive is part of ECC 6.0 is it possible to activate it on the Discovery System? I have an automotive customer that is interested in using the Discovery System to demo IS Automotive.

Hi Daniel,
I believe it is technically possible but you would probably sacrafice a lot of performance. Another java engine and another ABAP engine would need a significant amount of additional memory. However, If you don't run both at the same time you may be ok.
FYI - SAP has not tested this so I cannot garantee it will work.

Need to activate enhancement manually in testing system

Similar Messages

Maybe you are looking for