Need to activate Tables
Hi Experts,
Request you to please help me with the activation of following tables:
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated
When I checked in SE11, the above tables are already active in state.
I am trying to apply support packages where I am getting this error. Please help.
Thanks and Regards,
Naresh.
Hi Jitendra,
Yes, it is present in some of the already created requests (its a fresh ECC 6.0 IDES installation). But all the requests are already released. Any further update?
I found one link on forum:
support package error
Tried activating RATE component too, but after saving and trying to activate, got following error message:
TABL YCRM01_S_BUPM was not activated
Check table YCRM01_S_BUPM (BASIS/31.07.10/14:29)
Field RATE: Component type or domain used not active or does not exist
Nametab for table YCRM01_S_BUPM cannot be generated
Check on table YCRM01_S_BUPM resulted in errors
I have noticed that the component RATE in all 3 tables is containing Component Type PRP_RATE without any definition for Data Type and description. I believe the missing definition here is the source of not able to activate the table here.
Any suggestions? Please help.
Regards,
Naresh.
Similar Messages
-
Do i need to activate table after table index is activated? because now i see warning message at index that Index was not created at DB level.
Hi Rob,
Thanks for your answer, unfortunately i deleted one index from standard table, but when i created and activated (both index and table), i could not see index description in the pop-up box of list of indexes. do you have any idea that why i could not see index short text. -
Need to activate Tables during DDIC Activation Phase
Hi Experts,
I am trying to import support packs from SAPKB70009 to SAPKA70011 in a fresh ECC 6.0 IDES Installation. During the DDIC activation phase it got stuck. Request you to please help me with the activation of following tables:
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated
When I checked in SE11, the above tables are already active in state.
I have found one link on forum:
support package error
Tried activating RATE component too, but after saving and trying to activate, got following error message:
TABL YCRM01_S_BUPM was not activated
Check table YCRM01_S_BUPM (BASIS/31.07.10/14:29)
Field RATE: Component type or domain used not active or does not exist
Nametab for table YCRM01_S_BUPM cannot be generated
Check on table YCRM01_S_BUPM resulted in errors
I have noticed that the component RATE is containing Component Type PRP_RATE without any definition for Data Type and description. I believe the missing definition here is the source of not able to activate the table here.
Any suggestions? Please help.
Thanks and Regards,
Naresh.
Edited by: naresh_nmi on Jul 31, 2010 12:22 PMHi,
I created manually PRP_RATE as data element and gone ahead with the imports of Support Package. DDIC activation phase passed through.
Regards,
Naresh. -
Need to update table from Maintenance view (Very Urgent !!!)
Hi Abap Guru's,
I got a requirement where in I need to create a new Zprog so that it shld give a call to view v_abc and thru this view I need to update the table abc if any duplicate entries are entered then I shld popup a message.
Cld u plz help me out how to go further with this requirement and any suggestions...
if we create a table maintenance generator for the table abc then it will check for the duplicate entries are not ? if it checks for the duplicate entries then my job is done esaily but how to assign the zt-code to the table maintenance ?
awaiting for u r answer's and realyy appreciated with lots of points.
Regards,
Ravi V GanjiHi,
table generator will check duplicate entries as any
other table .
table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
using sm30 you can create entries manually.
also check below thread to assign transaction code to
table generator
Re: Table Maintanance Generator
create transaction use se93
select parameter transaction and give below attributes
Transaction code ZTX1
Transaction text Maintain View ZSDCZTVIEW
Transaction SM30 Screen 0
From module pool
Name of screen field Value
VIEWNAME ZSDCZTVIEW
UPDATE X -
URGENT NEED HELP : JOURNALING TABLES AND TRIGGERS GENERATION
Hi
I need generate journaling tables for any tables to audit the update, delete statements executed for the users. I captured an existant schema, then and I change the derfiniton of the target tables, setting the value of Journaling to "Server".
But, when I generate the DDL statements, the triggers of the journaling tables don't appears in the sql file.
¿What is the error?
I thing that Designer generates the triggers and the journal tables, ¿It's true?
Thanks in advance.
XaviYou have to use the "Generate Table API" menu option. This will generate the "journalling" triggers.
HTH
Roel -
I recently got a new MacBook Pro Running on OSX Mavericks and used Time Machine to move my documents and applications. However Microsoft Office Student/ Home applications did not work and requested a product key. I did not have the product key for it as I had installed Microsoft a long time ago, so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office. Everything installed fine, however when I go to open it it failed to open.
I need to activate my Microsoft Office within 15 days apparently and this is done when the application is launched. However none of the Microsoft Office applications do Launch (not Word, Powerpoint, Excel or Outlook).
Whenever I tried to open one of the named above the Microsoft Error Reporting App would pop up and list the errors. I was advised on other support pages to disenable this app so I have done that but now Word is now giving its own error message saying:
Process:
Microsoft Word [1380]
Path:
/Applications/Microsoft Office 2011/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier:
com.microsoft.Word
Version:
14.3.9 (14.3.9)
Build Info:
Unknown-131030~0
Code Type:
X86 (Native)
Parent Process: launchd [152]
Responsible:
Microsoft Word [1380]
I don't know or understand what is stopping me from launching my Misrosoft Office. I am wondering if others have encountered similar problems with OSX Mavericks and the Microsoft Office 2011? Does anyone have any ideas of how I can get it to launch?
I need to get hold of my Word and Powerpoint Documents ASAP.Build Info:
Unknown-131030~0
This indicates you had a bad install. You need to completely remove Office and reinstall using your new CD Key. See instructions here. Do not do the simple remove, Use the COMPLETELY REMOVE ALL FILES steps.
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office.
You don't purchase a PIN. A PIN is generated when you install Office. You need a CD Key. If you bought Office365, you activate online.
I have issues with the Microsoft User Data - are there supposed to be two? and where exactly do they belon. They are in the Documents file at the moment.
Unless you used Outlook or Entourage you can delete both Microsoft User Data folders. When you install Office it will create a new one. Only Outlook & Entourage used this folder for data. W,E,P stores it's data in the User's Library/Application Support/Microsoft folder now.
For help with removing dulicatate fonts installed by Office see:
Office 2011 Font Management with Mavericks -
hello
my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3
your answer will be highly appreciatedUse the links provided.
Recover your AppleID via https://appleid.apple.com/
Reset your password via iforgot.apple.com
If the iPhone is asking for an AppleID you do not recognize, the iPhone
is Activation Locked. Only the person who initiated the Activation Lock
can remove it. There is no workaround for Activation Lock. -
my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3
Use the links provided.
Recover your AppleID via https://appleid.apple.com/
Reset your password via iforgot.apple.com
If the iPhone is asking for an AppleID you do not recognize, the iPhone
is Activation Locked. Only the person who initiated the Activation Lock
can remove it. There is no workaround for Activation Lock. -
I have a new ipad mini that I need to activate but I need to get the data from my old ipad 1 and install on the new mini. I have a itunes acct and also icloud acct. How do I back up the ipad 1 data and then activate the mini. I assume I will need to transfer the sim from the ipad 1 to the mini.
Thanks for any info
wino454How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
Cheers, Tom -
Do I need to activate my Verizon iphone 5 before I use it in Europe?
do I need to activate my new unlocked Verizon iphone 5 before I take it to Europe? Do you know if there are any limitations on how many times/countries I can activate a gsm card? is LTE going to work as far as there is the right sim each time?
Thank you in advanceIf the iPhone does not have the necessary carrier support files, then it won't connect regardless of the bands used. And as evidenced by the addition of more EU carriers just by an update to iOS, those files are not automatically present in the iPhone except for those carriers listed on the page I referenced. I have yet to see any reports of anyone being able to connect a US-sold iPhone 5 to a European carrier via LTE, so those support files are apparently not present in US-sold iPhones.
Again, unless someone has found a workaround that I cannot find any evidence of, a US iPhone will it would seem not work via LTE in Europe. I'd be happy to see reports or methods to the contrary, but I cannot find any.
Regards. -
I have deactivated XPro on one machine and need to activate on this one
I have deactivated XPro on one machine and need to activate on this one
And "this one" refers to what? You need to explain better and provide the necessary technical information liek operating system and so on.
Mylenium -
I update my iphone 3gs from 4.1 to iOs 6.1 but after I update it says you need to activate your phone. I can't activate it thru itunes or wifi.
@Onlymanu and @ Easy Now - Google may provide some
direction. Discussion of jaibroken iPhones is prohibited per
Terms of Use for this forum.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I changed my laptop and need to activate my ADOBEACROBAT 10 PRO WIN on another laptop?
I changed my laptop and need to activate my ADOBE®ACROBAT® 10 PRO WIN on another laptop?
Hi Gavriel ,
For activation or licensing of Acrobat you just need to log in with your Adobe credentials ,i.e your Adobe ID and password.
This will activate your Acrobat 10.
Let us know if you face any challenges.
Regards
Sukrit Dhingra -
I need to activate my I phone 5s gold it needs an I cloud id witch I don't have
I need to activate my I phone 5s gold it needs an I cloud id witch I don't have
then sign up for icloud and get one
-
I have a pragunta, I need to activate my apple ID.
I have a pragunta, I need to activate my apple ID.
I can not download applications from my apple id. Since reestablishment my password nor served.
<Edited by Host>fiver1 wrote:
i have a balance of 30 dollars on my apple id and i cant purchase an app in the app store it keeps taking me to a window that says billing information
Was it from an iTunes Gift Card?
Pete
Maybe you are looking for
-
Hi sap gurus, please find one senario mentioned below i have raised a sales order with 630 units of a third party material, followed by 630 units of Tata Swach Crystal were sold to M/s Friendu2019s Combine Indore (Madhya Pradesh) through third party
-
Mail Freezes (Spinning Cursor) - Assistance Appreciated
Greetings, thank you for reading and responding to my post. I have a remote client (she's offline) with a macbook. She uses Mail. I haven't checked her OS version, but presume 10.4. She was sending an email, and went to attach a PDF. At this point sh
-
Business system change - PI 7.0 to P 7.3
Hello Everyone We are in the process of upgrading from PI 7.0 to P 7.3 Now we have two ports - meaning two sld - Different landscape The objects reside in PI 7.0 - We have three business systems on this Sld: say port 1000 DEV - ABCD000 In PI 7.3 : p
-
How to make 3 similar fun's does generate different sql string in 1 db call
Hi All, In my sql package I'm using 3 different functions to create two different sql strings and the 3rd function does some percentage calculations. My Db architect on code review suggest me that those two functions are almost the same except the sq
-
Download/Install FlashPlayer 10 fails
I HAVE TRIED EVERYTHING TO DOWNLOAD AND INSTALL FLASHPLAYER 10 AND/OR ANY NEW FLASHPLAYER! I CANNOT GET INTO ANY SITE REQUIRING FLASHPLAYER 10 AND I CANNOT INSTALL OR EVEN DOWNLOAD IT FROM ANY OF THE FREE GET FLASH ICONS ON THE SITES OR FROM ADOBE!!!