Need to add a new column in the extended VO

Hi
I have an urgent requirement like i need to add a new column in one of the extended VO.Can anyone give the procedure to do that..
Please do the needful.
Thanks
Preeti

Hi Gaurav,
For example...
Consider seeded VO is XXXVO and we added a new column to the XXX by extending XXCHRXXXVO(extended VO).and the we gone thru the full substitution process..
Now new requirement came as add a new column to extended VO - XXCHRXXXVO.Can you please tell in this example scenario? It will be good if you provide the inputs...
Thanks
Preeti

Similar Messages

  • Need to add 2 new columns to the existing table control of C223 transaction

    Hi ABAP Gurus,
    I have to do a screen enhancement for transaction C223.
    Below is the requirement:
    need to add 2 new columns to the existing table control of C223 transaction.
    there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
    i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
    i have created an append structure for  the 2 fields to the standard table MKAL.
    Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
    please sugest...
    Thanks & Regards

    Hi Santosh,
    Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
    IM_MKAL     Importing     Type     MKAL                                                                                Production Version
    EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
    EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
    EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
    EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
    EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
    EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
    EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
    EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
    the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change .  i dont think this can be used to add two new coloumns to C223 table control.
    I am not sure thats why seeking your help/valuable sugestion on this.
    Please provide your sugestion on this , so that i can come to conclusion on this issue.
    Thanks & Regards
    Siddhartha Mishra

  • Need to add a new release of the segment and maintain that version

    Hi All,
    I want to add one field in the Z segment type using WE31.But i am getting the error message as
    'Current segment definition <segment name> can no longer be changed and The current segment definition
    is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
    The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
    I tried going to the edit menu and cancel the release, but still it is not allowing.
    Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
    I suggested by that
    *You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
    If this is right then
    How to do this settings
    regards,

    'Add version' use this option - a new version will be created in the current release.
    then add your field to that and relase it again.
    Regds,

  • Need to add a new page in the SAP Script as last page

    Hello,
    I need to add a new page in the SAP Script as last page.
    Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
    FIRST page next page is NEXT
    NEXT page next page is NEXT
    LAST page next page is LAST
    END page next page is END.
    I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
    Thanks,
    Ravi.

    Hello,
    I need to add a new page in the SAP Script as last page.
    Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
    FIRST page next page is NEXT
    NEXT page next page is NEXT
    LAST page next page is LAST
    END page next page is END.
    Create the text element in the main wondow of your form
    /E           ENDPAGE
    /:           NEW-PAGE END
    and call the element from your print program by using write_form, where you want the END page in your print.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ENDPAGE'
        EXCEPTIONS
          element = 1
          window  = 2.
    Thanks,
    Ravi.

  • Need to add a new row at the end of the table

    Experts,
    working jdev 11.1.1.3.0
    i am adding row programetically, my requirement need to add the row at after last row.
    i tried different ways.
    Row newLastRow = getPWBBidLaneVO().last();
    int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
    getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
    laneRow);
    this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
    and
    http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
    is there a way to add a new row at the end of the table?

    Add this to the view row impl class
           public void insertRow(Row row) {
               //go to the end of Rowset if it has rows
               Row lastRow = this.last();
               if (lastRow !=null){
                    //insert new row at the end and make it current
                   int indx = this.getRangeIndexOf(lastRow)+1;
                   this.insertRowAtRangeIndex(indx,row);
                   this.setCurrentRow(row);
               }else { // empty Rowset
               super.insertRow(row);
               }

  • Add a new column and the value

    I want to add a new column to a table with a single value for all rows of this column. for example, add a new column called 'sid' with the value of 'dbp'. can I use this statement?
    alter table ... add sid varchar(8) 'dbp';
    or I have to add first then update?

    SQL> alter table blah add (sid varchar2(8) default 'dbp');
    Table altered.
    SQL> select * from blah;
                    COL1 SID
                       1 dbp
                       2 dbp
                       3 dbpMessage was edited by: SomeoneElse
    (used OP's column name)

  • I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

    I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
    I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
    I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks. 

    Hi,
    I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
    from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
    2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
    on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
     the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files  on visual studio 2010 so that the new report will show in the application. What's your opinion
    ? I have attached 2 images of the application and team foundation server 2010 and the report server.
    Thanks. 

  • Need to add a new field to the Schema for MDM Syndicator

    We are running MDM 5.5 SP6.
    We have a requirement to add a new field and syndicate the new field to the our Procurement System.
    I was able to add the new field to the repository and schema in SAP MDM Console.  However, when I went into the Syndicator to map the new field (which I do see) to the new Schema field, I don't see the new field to map in the Schema.
    How can I change the existing syndication jobs (11 of them) to use the new Schema?  Or do I have to recreate all of them?
    Thank you in advance!!!

    Hi Janynne,
    I hope you have modify the Syndication XSD(add new field) and then load it in XML Schema table of MDM Console, right ?
    If you have done it, now open MDM Syndicator>Go to File>Open, select the required Remote system and Available map.
    Now your existing map will be loaded which has not the required added field, Now again, go to file-->Export.
    Give file name and save this syndication map on your Desktop. Once you have done this.
    Go to File>New>Select respective remote system and Type as XML Schema if you have loaded this XSD in Console else select Type as XML Schema file and select the modified XSD (added new field XSD) from Desktop. Once it is loaded, import the existing syndication map(which you have exported as said above) which should have all the fields mapped, now in target side you will have here new added field too, map it with required source field in Item Mapping and then go to file>Save as>select the required Remote system and give new map name. Use this map for exporting files for future reference.
    Also, if your are using Port Concept, you need to change the Properties Map and XML Schema in Port of MDM Console.
    Regards,
    Mandeep Saini

  • MM50 : add new column in the material view

    Dear guru.
    I need to add a new column of material master in the material view of MM50.
    Do you have a solution (exit) in order to solve my problem ?
    Thanks.

    > I need to add a new field in the MM50 transaction not in MM02.
    Der Friend,
    Pls be specific about your query. As you know MM50 is for material view extension which is a std SAP trxn to help extend the views set by standard SAP pack and if you are referring new field as a new view then it is not so easily approachable.
    Shiva

  • ADD new Column in the form

    Is it possible to ADD new Column in the form like Sale Quotation, Sales Order and ...

    It is possible.
    go to tools >UDF > Manage UDF >choose marketing documents rows.
    select the row and say add to add a new column in the documents.
    Note: this will be applied to all documents \
    ie.quotation,order ,invoice, PO ,GRPO etc.
    U can hide these columns in form settings.
    This will help u
    Give points if helpful
    Regards
    Suresh Kannan

  • How to add a new column in a standard transaction mb5b

    Hi,
    In t-code mb5b, there are columns which describe the material description, material , opening stock , opening value, etc. I have to add a column with the field name "opening rate". Values for opening rate are calculated using the formula
    opening rate = opening value / opening stock.Please help.

    Hi
    if you want to add a new Column in the Standard transaction you need to create a copy of program RM07MLBD. Add your field in the end of STYPE_BELEGE, Populate the text for field in FieldCat and in the end Populate the value by doing calculation on each row and modifying the table.
    Rajnesh

  • How to add a new column in between two other columns

    I need to add a new column in between two other existing columns. Does anyone know how to do that? The ALTER statement adds the column at the end. Can someone give an example.
    Thanks
    Murali
    null

    There is no simpler way of doing this because it is not strictly necessary: you can always see your data in the order you want simply by going SELECT col1, col2, col98, col4, etc. Thus the column order only matters when you execute SELECT * FROM...
    If that really is important enough to you you'll have to drop and re-create the table, for which there are a number of different strategies.
    Your final comment suggests that you don't retain your database build scripts. If you did then rebuilding your constraints would be painless. There is a lesson there. The good news is that if you have TOAD (download from www.quest.com) you can generate DDL scripts from your existing schema.
    HTH, APC

  • How to add a new column in SIM datawarehouse screen

    Hi All,
    Need to add one new column in SIM datawarehouse screen and map that with a database table column.Navigation for the that screen is -Shipping/Receiving->Warehouse Delivery ->select ASN->Select Container ->We get a detail screen.There need to add a new column.How to achive this.

    Hi....
       You can edit it from screen painter.. directly....with edit mode....
    > 1. goto -> secondary window -> dictionary fields or program fields...
    > 2. enter the table or program name... and drag that filed in to your table control header
    > 3. Or you can enter I/O field from tool box and text field from tool box for header of that I/O field
    > 4. You can adjust visible length... for your new field...
    > 5. Save and activate.
    Did you faced any problem with that?
    Thanks,
    Naveen Inuganti.

  • To add a new Column in ME21 item screen

    Hi,
    We need to add a new column at item level of the transaction ME21.
    Does adding the new column refres to adding the new field in the EKPO table as an include structure?
    or
    Is there any screen exits which could be used.
    Thanks in advace.

    Dear,
    Before posting any threads plz search in SDN for ur reference below is one  link
    screen exit for VA01
    Cheers
    fareed

  • Add a New Column Before An Existing Column in 10g.

    Hi all,
    I Want to add column in a table ,before an existing column in Oracle 10G database.
    table A:
    id number,
    name varchar,
    job varchar,
    status char.
    i want to add a column before "JOB".
    I.E) USING AFTER OR BEFORE IN ALTER TABLE SYNTAX.

    887268 wrote:
    Hi all,
    I Want to add column in a table ,before an existing column in Oracle 10G database.
    table A:
    id number,
    name varchar,
    job varchar,
    status char.
    i want to add a column before "JOB".
    I.E) USING AFTER OR BEFORE IN ALTER TABLE SYNTAX.There's no such option, and to be honest there's no real need to do it as Oracle doesn't care what order the columns are in, and you can select out the columns in your queries in whatever order you want. You could use the DBMS_REDEFINITION package (http://docs.oracle.com/cd/B19306_01/appdev.102/b14258/d_redefi.htm) but unless you're really struggling then that's perhaps a little bit over the top. The simplest way if you really feel you need to do it is to create a new table based on the existing one with your new column in it and selecting the data into it at the same time...
    create newtable as
    select id, name, cast(null as varchar2(10)) as newcolumn, job, status from tableA;and then drop the original table and rename the new one...
    drop table tableA;
    rename newtable to tableA;of course you would need to recreate any constraints, indexes, triggers etc., and it could be problematic if you have foreign keys etc. but you have to weigh up what you are wanting to do and why you really need to put a new column in the middle of other columns rather than just putting it on the end.

Maybe you are looking for