Need to add additional storage to XServe G5/PowerPC G5 (3.1)

Need additional storage for the Xserve listed below. Any suggestions. Need at least 1TB

Just about any external array should work this this. Heck, if you only need 1TB then any external hard drive should work, too. Look for a FireWire-based drive since that will outperform the USB. Anything more than that will require a PCI card.

Similar Messages

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Can we use WWAN SLOT to add additional storage in T430S

Hello Folks,
Just wanted to see if any body tried this before.
I have ordered T430S with 128 GB SSD and DVD Writable in Bay drive.
I was just wondering if i can use the WWAN slot to add any additional storage?
Greatly appreciate any insight/suggestions
Solved!
Go to Solution.

You can add an mSATA SSD of the desired capacity, and it will show up to Windows like another drive.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Need to add additional SDK to xcode project.

Hello,
Can any one tell me how can i add additional SDK to my carbon application.
Thanks in advance,
Regards,
Sunil Adhyaru.

Could you give us some more information about this? What SDK do you want to use? You could go about it by importing the header files (assuming the SDK is written in a type of C) then import them into your application by doing the Carbon equivalent of #import "HeaderFileFromSDK.h".

Need to add additional path information when installing service

I'm trying to add the following additional parameters for when the NT service is installed:
SET ORACLE_HOME=c:\oracle\ora81
SET PATH=%WL_HOME%\bin\oci817_8;%ORACLE_HOME%\bin;%WL_HOME%\bin;%JAVA_HOME%\bin;%PATH%
SET CLASSPATH=%WL_HOME%\config\%DOMAIN_NAME%\lib\CT_Oracle_classes12.jar;%CLASSPATH%
What is the proper syntax to addinging these parameters to the delivered -extrapath:"%WL_HOME%\bin" flag in the install command?

Copy the properties into a HashMap, clear them, set the message payload, put the properties back

Need to add a storage drive that I can use between my Imac and Windows

I have a new storage drive that I want to partition and format for write capability on the Imac for storing large files that are used with other programs while working with the Imac but I also want to place an NTFS partition on that drive for use in Windows. The drive is 1Tb and I only need about 50% for each system.
I partitioned and formated the first partition using Disk utility and created a FAT 32 in the other but the FAT 32 limitations in Windows is a problem.
Is it possible to format the first partion in Window NTFS and the second using Disk Utility as a FAT 32 or another partition system that the Imac can read so I can at least have the NTFS partition recoginzed in Windows?
Is this possible?
How do I do it??

http://discussions.apple.com/thread.jspa?threadID=2035940&tstart=0

Need to add additional properties to a message

Hello Friends,
I need to obtain a JMS message and add properties to that message. Any message I receive is marked as read only. Hence I get a MessageNotWritableException when I try to set a property in that message. I have to call the clearProperties method but that will clear all the existing properties in the message. I would like to create a copy of this message and then add properties to it. Is there a way to this?

Copy the properties into a HashMap, clear them, set the message payload, put the properties back

Need to Add additional field in LOV

Hello Experts,
I am working on a R12.1.3 Platform with Oracle database version : Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production.
Here my requirement is in the Customer Information Additional form, when i select Address field, then it will displayed a List of values of an Address of the Customer Site.
I want to show the location field also besides the Address field in the LOV.
Following is the detailed information of the field.
Navigation :
Receivables -->India Localization --> Customers --> Additional Information
Address(Customer Tax Information India Localization)
JA_IN_CUSTOMER_ADDRESSES.ADDRESS
Please guide me for the solution.
Thanks,
Atul

Hello Experts,
I am working on a R12.1.3 Platform with Oracle database version : Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production.
Here my requirement is in the Customer Information Additional form, when i select Address field, then it will displayed a List of values of an Address of the Customer Site.
I want to show the location field also besides the Address field in the LOV.
Following is the detailed information of the field.
Navigation :
Receivables -->India Localization --> Customers --> Additional Information
Address(Customer Tax Information India Localization)
JA_IN_CUSTOMER_ADDRESSES.ADDRESS
Please guide me for the solution.
Thanks,
Atul

How do I add more storage on my iPad?

How do I add storage on my iPad? I can't update several apps because my storage is not sufficient.

You can't add additional storage to your iPad. You can see how much space apps are using via Settings > General > Usage, and how much free space that you have available via Settings > General > About > Available. You generally need approximately twice an app's size to be able to download and install it.
There are also wifi-enable drives that allow you to allow you to stream content to an iPad, so films, TV shows and music don't need to be stored on it e.g. Seagate GoFlex Satellite

I need to change the storage hard drive for both lightroom and Photoshop from my C drive to F drive

How do I change my storage drive from C to F in both lightroom and photoshop as I am running out of space on my C drive?

Storage Drive ?? Photoshop. What Platform and OS are you running.
I use PC therefore Windows. When I thing about Application like Photoshop I know the are going to be files all over the place. Windows like everything installed on the Boot disk. I gave up the fight many years ago and let windows have it way when application are installed using an installer. However besides the application files you have user files and I break user files down into to categories. Windows User files like applications settings, preferences, cashes, etc and user Data Files, Images, text documents, PDF. Applications like Photoshop also have add-ons an need swap space as well. While all Windows default library reside on the C: drive you can add additional storage to you document, music, picture and video libraries the are not on the c: Most of my user data file are actually on external ESATA drives or USB3 drives. System files, Application Files, Paging, swapping and backup are on internal SSd and Fast Disk drive. Some of the folder that look like they are on C: are actually shortcut links to folders on other drives.

Add additional IP to Windows 2008 SP2 Cluster

Dears,
I have a 2 node SQL 2008 Cluster 64bit (non r2) on Windows 2008 SP2 64bit (non r2) Server.
I need to add additional IP (different subnet) to the Cluster Quorum Resource.
Kindly guide me the steps to add the IP ?
Thanks
Tariq

HI Tim,
Well we need more than one IP address on the Cluster (Quorum) for our replication to work as for some reason we cannot use the production IP which is currently configured for this Cluster.
Further if you are doing multi-site cluster with different subnet then you may need two IP with different subnet on the cluster (not for services or application)
I found this usefull command and it worked on the win 2008 sp2 (non r2) server:
C:\>cluster . res "FS IP Address" /create /group:"file server" /type:"IP Address" /priv address=192.168.1.106 subnetmask=255.255.255.0
For win 2008 r2 servers there is powershell command through which we can achieve the same.. :)
it took me hard time to figure out that "failoverclusters" module will not work for win2008 SP2 server.. !!
Thanks

Add additional page to Remittance Advice

Hello Experts,
I am working on Remittance Script.
In Remittance Advice , there are three pages, FIRST,NEXT and LAST.
I need to add additional page to the existing Remittance layout.
This page should show the additional data for all PO/SES related to the invoice and should be printed before the last page which just contains summary.
I am able to add the additional page with CONTROL_FORM but am not sure how to print the data
on it. I tried creating an additional main window but it says there can be only one main window (which already exists in the layout)
there can be multiple pages with the PO/SES data.
Requst you to please help me in this.
Many thanks in advance,
Priyanka Gaur

Hi,
Try to check for the Page name equal to your summary page in Main window and print the details which you want to present only in that page. You can use the symbol &ITCTG-TDPAGE& to get the current page.
Regards,
Vimala P

Looking for additional storage to attach to xserve

I have a client that has filled up the space on their xserve. They would like to add a firewire 800 drive for additional storage. They cannot afford the Promise products. Does anyone have a recomendation? I would prefer if the additional storage was at least Raid 1. We have looked at everything from WD Raid 1 externals to Drobo. Reliablity is more imprtant than performance for now.
Message was edited by: harlan Lax

You will not get the performance from the Sonnet cards -especially in a RAID configuration- that you would expect. Those cards employ 'port multipliers' and any RAID configuration will be through software. You would better serve your client with an Areca product such as one of these:
http://www.areca.com.tw/products/externalx.htm
as these employ a dedicated hardware I/O processor and do support EFI booting on Intel XServes. They are not cheap, around $600US from Newegg for the 1120ML, but they are not as expensive as a VTrak, either. Also, when buying disks for the storage array, avoid bulk OEM desktop class drives and invest in server class products such as the Western Digital RE3 or RE4 series drives.

TS3988 How do I add additional devices to my iCloud storage?

I have recently purchased an iPhone 5s. I keep getting a message saying my iPhone cannot be backed up because there isn't enough iCloud storage available yet I have 7GB available.
Can anyone advise how I add this new phone to my existing iCloud storage?

there isn't enough iCloud storage available yet I have 7GB available.
How big is the backup it is trying to do? If its bigger than 7GB you'll get that message.
Can anyone advise how I add this new phone to my existing iCloud storage?
If your new iPhone 5s is signed in to the same iCloud account as your other devices, then it is already using your existing iCloud storage.
As iCloud only comes with 5GB of free storage per account (not per device) presumably you have purchased additional storage?

I have a macbook air and need additional storage should i consider a time capsule or a simple external hard drive?

I have a macbook air and need additional storage should i consider a time capsule or a simple external hard drive?

If you move live files (files you don't want to lose) to an external drive, you need to back them up. Any files not backed up are at risk of loss. Hard drives and SSDs can fail at any time. It is hard to backup a Time Capsule so a TC should be used only as a backup device.
Do you have a Time Machine backup now? If so, and if it is large enough, you can backup your internal and external disk to it using Time Machine. If not, you all need to purchase an external drive or TC as your backup device. (I recommend an external hard drive for backup instead of a TC.) Ideally the backup drive should be twice the size of what you are backing up but 50% larger will work so if you have an external 1 TB disk and an internal 250 GB SSD then a 2 TB backup disk will work well.
By default, Time Machine will not backup the external disk. You need to remove it from the exclusions list:
To have Time Machine backup your system disk and your external offload disk up onto your Time Machine disk:
 > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.

Need to add additional storage to XServe G5/PowerPC G5 (3.1)

Similar Messages

Maybe you are looking for