Need to add bit of text to each page-is there something I can do to 'automate' the process?

Hi there,
Somehow in the process of piecing together a book, I did use Master Page elements for most of my pages, but not for many other pages.
So now I have to add a small bit of text (the name of the book) and a page number (I didn't add page numbers because I didn't know what pages would go where; now I've got all of that organized) at the bottom of each of these pages.  Y will be the same for these new additions for both even and odd pages, but the X factor will be quite different of course.
Is there something I can do to speed up the process?
I'm wondering if, after the fact, I can create two new Master Pages that have just these two elements (the name of the book and a placement for a page number), and then apply this to my pages.
I hesitate to try this in case it adds these two new elements, but gets rid of everything else.  If that's a possibility I'd rather just enter each of these elements one at a time, adding numbers for X and Y, carpal tunnel be damned!
Thanks,
Malcolm

You can apply a master page without affecting anything that is already there.
If you are worried about losing data, you can try this on a copy of the file, just to be safe.

Similar Messages

  • I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

    i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

    Hello,
    the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
    >>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
    If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
    Hans-Günter

  • Most times i am not within range of a wi-fi connection if there something i can add to my ipod touch to access the internet from afar?

    Hello Most times I am not within range of a wi-fi connection is there something i can add to my ipod touch to connect to the internet ?

    You can purchase a MiFi or similar device.  It acts like a wifi hotspot and connects to the internet via a cellular connection.  You need a data plane too.
    https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CHsQFjAA&ur l=http%3A%2F%2Fwww.verizonwireless.com%2Fb2c%2Fmobilebroadband%2F%3Fpage%3Dprodu cts_mifi&ei=rcWKT-jeBYes8ATi7pDeCQ&usg=AFQjCNGEnpTkiGCnUOHacw5dEOr0BOc7zg&sig2=M 4Xf1Hglj2FYYYfnC5rJTg

  • How can I fix a vibrating noise on my desktop? Is there something I can do, or do I need to have it serviced?

    How can I fix a vibrating noise on my desktop?  Is there something I can do, or do I need to bring it in for service?

    What model iMac? Ther are four broad families of iMacs dating all the way back to 1998, and each can have different issues.

  • I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

    I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006  via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

    You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
    Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

  • Need to automate the process of partial orders-deliveries

    Hi experts,
    I need to automate the process of partial order deliveries in VL01N.
    I checked few BAPI for the above requirement.
    BAPI_OUTB_DELIVERY_CHANGE
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    But have no clue ,which would be relevent.
    If any one of you have worked on any such requirement before,please let know,which BAPI i can use in this development.
    Thanks in advance.
    Meenakshi

    Hi
    Try with function modules WS_DELIVERY_UPDATE and RV_DELIVERY_CREATE.
    Regards
    Srilaxmi

  • My iPhone 4s is stuck on the "connect to itunes" whenever I tried to turn it on. But at the moment I don't have a computer and I really need my phone on right at this moment. Is there anyway I can get it to turn on without a computer??! Thanks!

    My iPhone 4s is stuck on the "connect to itunes" whenever I tried to turn it on. But at the moment I don't have a computer and I really need my phone on right at this moment. Is there anyway I can get it to turn on without a computer??! Thanks!

    i tried to connect it but it didnt work...nothing changed...

  • My iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?

    my iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?
    Please help.

    You can try to log out of iMessage and then sign back in.  However, even under optimal conditions, iMessage will not always work.  That's why the option of 'Send as SMS' is so important.  There might be temporary outages in the related iMessage servers.

  • I will have the majority of strength with my phone just sitting there but as soon as I try to call or text it goes to "searching".  No other phones have this issue- so it's not network related.  Is there something I can do to my phone? Iphone 4,latest OS

    I will have the majority of strength with my phone just sitting there but as soon as I try to call or text it goes to "searching".  No other phones have this issue- so it's not network related.  Is there something I can do to my phone? Iphone 4,latest OS

    Hello, could this be it?
    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
    http://support.apple.com/kb/HT5559

  • I'm conecting my Ipad to the computer to charge and it shows the charging sing for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?

    I'm conecting my Ipad to the computer to charge and it shows the charging sign for a few seconds then says not charging, do I need to bring it in to get that fixed or is there something I can try to do on my own?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have an iPad that is frozen up.  I am unable to unlock 000000000000000r slide to turn off.  Is there something I can do to fix or do I need to take in for repair?

    I have an iPad2 that is frozen up.  I am unable to unlock or slide to turn off.  Has anyone had this issue?  Is there something I can do to fix or do I need to have it repaired?

    I just posted to you in the other thread:
    The Home button is the round indented circle the with small square printed in it, at the bottom of your iPad' face above where you plug the iPad cable in.
    The Power (sleep) button is the the small rectangular button on the upper rim of your iPad at the right corner.
    to Reset your iPad:
    hold both the Home button and the Power button down for approx 10 seconds until the Apple logo appears.  If a red slider appears, ignore it.  When the Apple logo appears let go promptly and wait another 30 seconds for your iPad to turn itself on.
    Then download the iPad manual, which has a picture of your iPad with arrows telling you what everythings is.
    To find the iPad manual go into iBooks on your iPad, select Store at the upper left, scroll down to Popular Collections, then scroll right to iOS 7 Guides, select this, then select the iPad User Guide and it will download for free.  Then you will have it on your iPad in iBooks to refer to whenever you need it.
    You can also read it online on the Apple website.

  • Need to add and manipuate text in slideshow.

    I have created a slideshow in iDVD, but I need to add text to some slides. I know you can check an option to show the titles of the photos, but this isn't quite what I need. I only want text on some slides and I would like to be able to manipulate where the text is, how it moves, font/color, etc for each individual slide. Also, it's kind of an annoyance to have to name the photo what I want the text to say.. I'd rather just add a text box.
    After a lot of experimenting and researching, I'm pretty sure this cannot be done using iDVD or iPhoto. I also have Final Cut Pro and DVD Studio Pro, but am relatively new to these programs and haven't tried using either of them for this yet.
    So, does anyone know what program I can use to add text as described above?
    Thanks

    Welcome to the forums!
    In such cases I go a different route.
    I use Photo to Movie:
    http://www.lqgraphics.com/software/phototomovie.php
    which not only does what you are asking, but heaps more besides.
    Once complete it will transfer the project to iMovie for completion (chapters etc) thence to iDVD or Toast for burning.

  • Need to add superscript for text field--HELP NEEDED.

    Hi Friends,
    Is there any way to implement superscript and subscript text in Crystal?  For example, I would like to superscript the portion (1) of the following string:
    "Buy(1) or Sell(1)"
    The only way I have found to do this is to put the "235" in a separate text field that uses a smaller font size, and overlay it into the gap that I intentionally left in the larger text field.  For display and printing purposes, this works OK, but if a report containing these strings is exported to Excel, the text fields are exported as separate cells, which makes the exported report look funny.
    I can create this string in Word, then cut and paste it into a text field in Crystal (which initially seems to work), but as soon as I click off the field, all the characters in it are converted to the same font size.
    If this can't be done in the current version of Crystal, are there any plans for it to be implemented in future versions?

    hello all,
    the text interpretation for html or rtf in fields will not render superscript or subscript. the basic rule is that whatever you can format directly in a crystal reports text object, that's what you can have interpreted.
    look up "text interpretation html" in kbase for a full list.
    one option is to turn html passthrough on the server in question if this is a huge deal for you...if you want instructions on how to turn html passthrough on, they are located in the webelements user guide at
    http://diamond.businessobjects.com/node/255
    after doing so, you'd drop the database field into a formula and any html in the database field would be interpreted.

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • How to add an order number to each page of an adobe doc?

    I have a customer that is requiring us to add their order number to every page of multipage documents we send them.  Right now we're using typewriter and pasting the order number to each page individually.  Is there an easy way to automate this process?  So that for each order number, we just type in the order number once and each page subsequently has the order number stamped on it.
    Thanks in advance for any and all help.
    We are running both Adobe Acrobat 7.0 and 8.0.

    Perfect.  That's exactly what I was looking for.
    Thanks a lot.

Maybe you are looking for