Need to add custom field on Create Expense Report in ESS

Hello all,
How should i procced for adding custom field on portal while creating travel expense report.?
Please help.
Regards

Solved

Similar Messages

Need to add custom fields in Report RM06EN00 ( Tcode ME2N ) in the Output

Hi,
MY requirement is i need to add 10 custom fields in the standard program RM06EN00 whos tcode is ME2N.
i have appended the fields in the EKKO table and they r now available in the dynamic selection screen of the report RM06EN00.
But i need to display this fields in the output and these fields should also be available in the change layout of the ALV report which is displayed when u click on the change button after pointing the cursor on the PO number.
I am looking out for any enhacement though which this requirement can be met. however my second option is to copy the standard report to a z program and modify it. but i think it will not going to be east and it may take a lot of time..
Need both advice and answers for this soon.
Thanks in advance.
Best Regards,
Fardeen

If you have want to add fields in Field catalog from se11 Add fields in this structure MEREP_OUTTAB_PURCHDOC using append structure and activate and execute ME2N with BEST_ALV IN SCOPE LIST U WILL find in change layout.

Need to add customer fields in CRM_DNO_MONITOR

Hi Experts ,
Using EEWB i created few customer fields in CRMD_ORDER.
Now same fields i am adding in CRM_DNO_MONITOR.
I enhanced standard program "CRM_DNO_SERVICE_MONITOR" for CRM_DNO_MONITOR.
Added new selection screen for customer fields. Now i can see these fields in CRM_DNO_MONITOR. Now i want to implement search criteria for the same.
Can you please help me where to add this search criteria?
Thanks in advance ,
Vijay

Hi,
While adding this field through EEWB, did you try to make this field "search & result" relevent? If you specify it search and result relevant it would directly be availble in the respective search and result views.
In this scenario framework will take care of adjusting the logic of search/result for custom fields added through EEWB/AET.
Hope this helps.
Cheers,
Sumit Mittal

Need to add custom fields in J1IH tcode

Hi Experts ,
In J1IH tcode we have to include two fields ATI1 and AT2. Please tell me how we add that if possible please provide me the sap note ...aas well .
Thank you for your earlier help.
Regards,
Venki

hi
check this note
616697 NCCD changes - Budget 2003

Add Customized fields in FICA document

Dear all,
We are having a requirement in which we need to add customized fields in FICA document and need to post them .Can anyone please tell me how to meet this requirement
susmita
Edited by: susmitha harini on Aug 11, 2010 12:46 PM

Hi Susmita
You can add the fields to the customer includes
CI_FKKOP
CI_FKKKO
To create/update the customer fields in automated processes you can use the standard SAP BAPI:
BAPI_CTRACDOCUMENT_CREATE
BAPI_CTRACDOCUMENT_CHANGE
Check out the import table EXTENSIONIN with structure BAPIPAREX.
To add the fields to the standard SAP transactions, have a look in IMG under
Financial Accounting
Contract Accounts Receivable and Payable
    Basic Functions
      Posting and Documents
        Document
          Screen Preparations
Yep
Jürgen
Edited by: sattlerj on Aug 12, 2010 8:45 PM
Edited by: sattlerj on Aug 12, 2010 8:49 PM - Added EXTENSIONIN

Trying to Add IBAN Field to Vendor Changes Report

Hi,
I need to add IBAN field to vendor changes report (S_ALR_87012089).
These are the steps I took:
1) Go to OBAT and add new field group
2) Go to OBAU and add new fields to field group created in (1)
However, TIBAN fields cannot be added to the field group.
Are there any workarounds?
Thanks.

No solution except customization

How to add custom fields in BADI Subscreen.

Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.

Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

How to add custom field to ical

Hi
I run a small business from my mac pro and my iphone. I would like to get a good workflow but it seems I am missing a few bits of information.
First I would like to add custom fields to ical so that I can gather all the information I need in one spot. For example, I create a meeting with new client Tim Smith on Friday so I want to enter his name and contact info into ical because I need his address and phone number on the event so I can reference it.
Then I would like to find a way to automatically create a contact card based on that information. If I can find an apple script that reads the fields in Ical and creates new contacts based on new events that I created.
Then I would like to automate extracting the email addresses to send out preformed group mailers for people who were in my calendar that day ie "Thanks for meeting with me, I think we got a lot accomplished and hope to see you at the next meeting." etc etc
Then also automate reports based off of my ical events such as "Report for how many times I had a meeting in the Blue Room this week" or "How many times did I meet with Timothy Smith" this year
I have tried automator and it doesn't seem strong enough to do this so I am thinking AppleScript but I am not very good at it. Anyone have any ideas on any of these issues?

Tried the iCal forum and support
www.apple.com/support/ical
Tried Lion Community?
you have notebook and tower?
www.apple.com/support/macbookpro

Custom field in Create Bid Invitation..

Hi,
I have to add a custome field in the 'Create Bid Invitation - Find bid invitation - Extended Search screen. has anyone done this same scenario.
john.

hi,
I dont think you can add custom field at the item overview level.
There is nothing in standard for CUF in item overview.
CUF are available in Header/item basic data, accounting and search screens, but nothing in item overview.
The only workaround which i can see is to modify the HTML page in the Internet Service .
You can try to use some standard field which stores the information you want to display (instead oc creating a custom field).e.g.If you want to display the Product CAtegory in addition to its description on the item overview screen(Table control),then you will have to find out the std field which stores the Prod category value.
If the standard populates that field with the info you require you'll not have to populate it yourself: so check it.
Be careful to add this column as the last column in the Table control, as the template refers to column numbers for existing data.
Then change the template in order to manage the field display in the different cases (selection and display).
DO NOT COPY STANDARD PROGRAM, or you will loose modification tracking during upgrade or SP applications.
Be careful. The same HTML templates of the Internet Service are (shared) used for all the users. So be very sure in making changes to the standard HTML template and publishing those changes. Incase of shortdumps here, you need to go through each line in the Service to see the cause of the error(which might be as silly as missing a comma, bracket, period after a line). SAP dump analysis is not much help here.
BR,
Disha.
Pls reward points for useful answers.

Add customer fields in Shopping cart and purchase order

Hi,
I have to add fields(moder of transport, country origin, country destination and more) in Shopping cart and purchase order in SRM system and remotle i have to update the same data in R/3 System.
could you please guide how to add the fields in screen.
regards
Shakeer

Hi
We have done this type of requirement several times in our previous SRM Implementations.
You need to create an Append Structure in the Standard Structure to create the custom fields in your case.
Refer this link below for details.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
Define the fields of the append structure. You can proceed as when creating a normal structure with two restrictions (see Creating Structures).
The fields of an append structure must lie in the customer namespace, that is the field names must begin with ZZ or YY. This prevents conflicts with fields inserted in the table by SAP.
http://help.sap.com/saphelp_srm50/helpdata/en/5b/c9df3b6ac34b44e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/28/857a1867b52e4f8472c5d49209a675/frameset.htm
BBP_CUF_BADI_2 BADI will be used to control the properties (hide/unhide, input/output enable or disable) for those customer fields you created in the above append structures.
BBP_DOC_CHANGE_BADI for defaulting or modifying the customer field contents, incase required.
BBP_DOC_CHECK_BADI for issuing customer messages for the customer field contents (incase data is entered incorrectly) , incase required.
Let me know incase you face any issues.
Regards
- Atul

WCTL Transaction - Add Custom Field Header level

Hi All,
Here at my client's place guys are doing PoC on WCM (PM being used for last couple of years) and the requirement is to have a custom field at Header level of WCTL (WC Application Change ) with F4 option.
I have created a custom field with z table for master data to it (will be used as check table for this field) and appended it to the WCAAP - WCM: Application using append structure option.
Now I need to add this field at the header level of the mentioned transaction. I searched throgh for any available exits, BADI's or enhancement spots with no success. Even Inforums i couldnt find any help and hence this message.
Will appreciate any inputs in this regard,
Thanks,
Lakshmi Narayana.

Hi Narasimhan,
First of all thank you verymuch for the quick reply.
I tried to search for the BADI definition (BADI_WCM_WAPI_001) and Enhancement Spot (ES_WCM_BADI) (se18) with no success. We are using ECC6.0 with SAP_ABA patch level 10, EA-APPL (SAP Enterprise Extension PLM, SCM, Financials) at level 7.
Does this has any impact on why I couldnt find it or is there something that I am doing wrong... Please guide me...
Thank you once again for your time.
Rgds,
Lakshmi Narayana

Add custom fields VL10G

Hi all,
I want to add some custome fields to be seen in alv output for tcode VL10G .
I had a look at V50R_USEREXITS. What things i need to output are not in SHP_VL10_ITEM.
Please advise.
Regards,
Himanshu

Hi Rajesh,
Thanks for your reply!
i need to add two fields
fields: late reason
revised ship date and thses can be fetched using the delivery number.
I know how to create enhance poitns. Can you please let me know...the place where i need to put the enhancement point...
and how will i be able to populate the required structure .(once i have done an append structure in se11)
I am confused now as to do we have to use include V50R_USEREXITS ?
If by enhancepoints ...how and where will we put it.
coz all the code in include V50R_USEREXITS (which has sub includes) is commented.?
Request you to explain in a step by step manner.
Thanks a lot for all your help.
Regards,
Himanshu

Need to add a field in PA2001

Hi Experts,
Need to add a field in IT2001 to capture u201CReference No.u201D
The field must be >= 10char long. Must be u201CChar/alphanumericu201D.
-Would like to add it to some existing fields in PA2001 which we may use for u201Cref. no.u201D instead of creating new zxxx field to be added to PA2001.
Is this possible
Thanks

Hi,
Unfortunately you cannot enhance time infortype:
The following infotypes are excluded from the enhancement concept:
Actions infotype (0000)
Additional Actions (0302)
Time Management infotypes (2nnn)
Applicant Actions infotype (4000)
http://help.sap.com/saphelp_46c/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm
The solution can be to create custom infotype with required field and link it with IT 2001 via dynamic action.
Cheers!

Need to add custom field on Create Expense Report in ESS

Similar Messages

Maybe you are looking for