Need to add customer fields in CRM_DNO_MONITOR

Hi Experts ,
Using EEWB i created few customer fields in CRMD_ORDER.
Now same fields i am adding in CRM_DNO_MONITOR.
I enhanced standard program "CRM_DNO_SERVICE_MONITOR" for CRM_DNO_MONITOR.
Added new selection screen for customer fields. Now i can see these fields in CRM_DNO_MONITOR. Now i want to implement search criteria for the same.
Can you please help me where to add this search criteria?
Thanks in advance ,
Vijay

Hi,
While adding this field through EEWB, did you try to make this field "search & result" relevent? If you specify it search and result relevant it would directly be availble in the respective search and result views.
In this scenario framework will take care of adjusting the logic of search/result for custom fields added through EEWB/AET.
Hope this helps.
Cheers,
Sumit Mittal

Similar Messages

Need to add custom fields in Report RM06EN00 ( Tcode ME2N ) in the Output

Hi,
MY requirement is i need to add 10 custom fields in the standard program RM06EN00 whos tcode is ME2N.
i have appended the fields in the EKKO table and they r now available in the dynamic selection screen of the report RM06EN00.
But i need to display this fields in the output and these fields should also be available in the change layout of the ALV report which is displayed when u click on the change button after pointing the cursor on the PO number.
I am looking out for any enhacement though which this requirement can be met. however my second option is to copy the standard report to a z program and modify it. but i think it will not going to be east and it may take a lot of time..
Need both advice and answers for this soon.
Thanks in advance.
Best Regards,
Fardeen

If you have want to add fields in Field catalog from se11 Add fields in this structure MEREP_OUTTAB_PURCHDOC using append structure and activate and execute ME2N with BEST_ALV IN SCOPE LIST U WILL find in change layout.

Need to add custom field on Create Expense Report in ESS

Hello all,
How should i procced for adding custom field on portal while creating travel expense report.?
Please help.
Regards

Solved

Need to add custom fields in J1IH tcode

Hi Experts ,
In J1IH tcode we have to include two fields ATI1 and AT2. Please tell me how we add that if possible please provide me the sap note ...aas well .
Thank you for your earlier help.
Regards,
Venki

hi
check this note
616697 NCCD changes - Budget 2003

Add Customized fields in FICA document

Dear all,
We are having a requirement in which we need to add customized fields in FICA document and need to post them .Can anyone please tell me how to meet this requirement
susmita
Edited by: susmitha harini on Aug 11, 2010 12:46 PM

Hi Susmita
You can add the fields to the customer includes
CI_FKKOP
CI_FKKKO
To create/update the customer fields in automated processes you can use the standard SAP BAPI:
BAPI_CTRACDOCUMENT_CREATE
BAPI_CTRACDOCUMENT_CHANGE
Check out the import table EXTENSIONIN with structure BAPIPAREX.
To add the fields to the standard SAP transactions, have a look in IMG under
Financial Accounting
Contract Accounts Receivable and Payable
    Basic Functions
      Posting and Documents
        Document
          Screen Preparations
Yep
Jürgen
Edited by: sattlerj on Aug 12, 2010 8:45 PM
Edited by: sattlerj on Aug 12, 2010 8:49 PM - Added EXTENSIONIN

Add new fields in CRM_DNO_MONITOR

Hi,
I have a requirement to add new fields to screen of transaction_code CRM_DNO_MONITOR. I found out the badi name "CRM_DNO_MONITOR" which uses interface "IF_CX_CRM_DNO_MONITOR" implemented in class "CL_EX_CRM_DNO_MONITOR".
I tried to debug tcode CRM_DNO_MONITOR to check for which action the methods in the BADI is called, it looks like it is not calling at all and generates the screen.
Please suggest how to add more fields in the screen using this BADI or any other way to add new fields.
Thanks
Prasad

Hi,
This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
Please check this thread:
Reg : CRM_DNO_MONITOR
Regards,
Sanjai

Need to add more field in the selection screen in tcode crm_dno_monitor

Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
Prasad

If you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii

How to add custom fields in BADI Subscreen.

Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.

Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

How to add custom field to ical

Hi
I run a small business from my mac pro and my iphone. I would like to get a good workflow but it seems I am missing a few bits of information.
First I would like to add custom fields to ical so that I can gather all the information I need in one spot. For example, I create a meeting with new client Tim Smith on Friday so I want to enter his name and contact info into ical because I need his address and phone number on the event so I can reference it.
Then I would like to find a way to automatically create a contact card based on that information. If I can find an apple script that reads the fields in Ical and creates new contacts based on new events that I created.
Then I would like to automate extracting the email addresses to send out preformed group mailers for people who were in my calendar that day ie "Thanks for meeting with me, I think we got a lot accomplished and hope to see you at the next meeting." etc etc
Then also automate reports based off of my ical events such as "Report for how many times I had a meeting in the Blue Room this week" or "How many times did I meet with Timothy Smith" this year
I have tried automator and it doesn't seem strong enough to do this so I am thinking AppleScript but I am not very good at it. Anyone have any ideas on any of these issues?

Tried the iCal forum and support
www.apple.com/support/ical
Tried Lion Community?
you have notebook and tower?
www.apple.com/support/macbookpro

Enhance Standard Info Structure SAP_CRM_ACT to add custom fields in CRM Activity archive Search

Hi All,
We have a requirement where we need to enhance CRM UI archive search with custom fields for CRM activity Object CRM_ACT_ON. As per my analysis Standard Archive Search for activity Uses info structure SAP_CRM_ACT for searching archived data.
But when we are trying to add custom fields into above field catalog, it is treated as modification. But Modification is not allowed in our landscape.
Standard infostructure is harcoded in SAP standard method ARCHIVING_READ of class CL_CRM_REPORT_ACC_DYNAMIC which is called as part of the process. So we are not able to go ahead with custom info structure.
Can you please le me know if there are any alternative way to meet above requirement or I have missed any steps.
Thanks & Regards,
Sujit

Hello Thomas,
Maybe this link can help.
add new field to search criteria and result.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0747ac2-ffd9-2910-de9a-8a3dc44da8b4?QuickLink=index&overridelayout=true&12966506314316
Search Options - Knowledge Management - SAP Library
regards,
Grace

USER EXIT or BADI to add custom fields in QI06 Output

Hi Gurus,
I have tried to find out Suitable User Exit / BADI to add custom fields in QI06 ( Collective Maintenance Display) output. but in vain..
We found USer Exits -QLIB0001/QLIB0002 .
Badi- QB_PLAN_SELECTION_P, QB_Q_INFO_RECORD,QB_QM_SYSTEM_COMPARE,ALV_SWITCH_GRID_LIST
which are not useful.
So need your Suggestions / help in finding out suitable exit/ BADI.
Thanks in Advance,
Lalit.

Hi,
You can use the function module SXV_GET_CLIF_BY_NAME to find more BADI. Set a break point and run QI06 until the end.
I hope this helps you
Regards
Eduardo

Add custom fields in EL09/EL35 transaction

Hi,
I need to add custom fileds in these transactions in order to specify particular client information I have to extract in the output of meter reading order.
How can I accomplish this need?
Do I need to define a custom transaction or do I have to implement some customizing-badi,... I didn't find anything useful in my researches.
Can you help me please?
Thanks,
Gabriele

Hi Gabriele,
When we are generating meter reading orders, entries are made in tables EABL & EABLG. You can add custom fields in these tables using enhancement EDMMR001.
Based on your rules / logic, you can update these custom fields from user exit - EXIT_SAPLEL01_010.
Now, when you are downloading meter reading orders, you can access these values.
Alternatively, if you can derive these additional values in run time, you can place your logic in Meter Read Order Download Print Workbench program.
Hope this helps.
Regards,
Avinash

Add custom fields in a new tab in J1B3N

Hi All,
In the project we need to to add custom fields from custom table (z table) in an Additional Tab (header) of J1B3N transaction. How can we do it using user-exits or BADI's?
I've looked for this requirement in the forum, but none of them related to J1B3N transaction.
If someboby has developed something like that, I will be grateful for help.
Thanks in advance.

Hi Okuma,
Did you tried what are the badis are triggering while you run this transaction,then you will get an idea .
Regards,
Madhu.

Need to add customer fields in CRM_DNO_MONITOR

Similar Messages

Maybe you are looking for