Need to add "Geneva" technology in Topology Manager

Hi,
how to add "Geneva" technolody in topology Manager?

Is Geneva another technology, or is it a data server within one of the existing technologies?
Alternatively, if it is like an existing technology, you can duplicate that technology, then rename to Geneva. This has the advantage that the datatype translation table is pre-filled for you.
At worst, right mouse on a technology and selecvt the "Insert" option, and start from scratch.

Similar Messages

  • I need to add new MacBooks to mac server workgroup manager. 10.9.5

    i need to add new MacBooks to mac server workgroup manager. cannot find them by mac address, name or ip. how do i add the new MacBooks. i think there is no workgroup manger programs for mavericks, so there must be a new way to create and add new clients to workgroup manager. can someone please inform me or point me to a dock that explains how thank you.

  • Need to add extra Payment modes in ESS Travel management against a Reimbursement type

    Dear Travel Experts,
    I need to add extra Payment modes such as Corporate Credit Card and Company Card options in Payment mode option dropdown list  in ESS Travel management against a Reimbursement type.
    Screen shot attached where I need extra two Payment mode options:
    Please let me know how to add it .
    Regards,
    Nayak

    Dear Sigi,
    Please find more screen shots :
    Regards,
    Nayak

  • HT4913 I got a new computer and have an old iPod that I need to add to "manage my device" and cant seem to get it added. When I originally plugged in my iPod to my new computer, it ended up erasing all of my playlists.Help

    I have an old iPod that has all of my music and use my personal computer to keep iTunes on and store all of my music. Recently my old computer died and had to get a new computer. I got my iTunes restores on my new computer and see all of my music, but when I tried to sync up my old iPod (love it!), I ended up erasing all of my playlist. In my "manage my device" I see my iPhone, my iPad, but I do not see my iPod. How can I add my iPod to "my manage my Devices" and get it synced up? Any help would be greatly appreciated.
    BTW - Somehow I was able to restore my iPod back to Factory Settings.

    There are lots of ideas floating on the web for this particular issue - all of which I tried. I had the same problem and it turned out to be my USB cable. I thought the cable was fine as it would charge my phone and play but the data transfer pin was bent. I replaced the cable and it fixed the problem. Worth a shot as it is an easy fix!

  • Error while configuring work repository details in topology Manager

    Hi,
    Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
    When i try to do so, am getting the below error while configuring the work repository details in topology manager.
    “A work repository already exists for this connection.
    Enter the repository password to declare it in your Master Repository”
    I tried with both the new master and work repository password. But no luck.
    Previous Master & work details:
    Master: PCS_MASTER
    Work:PCS_WORKREP
    New Details
    Master: PCS_MASTER_INT
    Work:PCS_WORKREP_INT
    Instance: PCBID
    Am trying to create new master repository for PCS_MASTER_INT.

    In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
    If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

  • Error while starting Topology manager

    Hi,
    I have Oracle XE & ODI installed in Enterprise Linux. Both are on the same machine. I have created the new schema (Fusion) and also ran the repcreate.sh to create the master repository for the same.
    Now to log into topology manager, I created a new connection, tested it and then tried to log in.
    I get the following error:
    [root@dhcp-hyd-phase2-ground-floor-10-176-82-232 bin]# ./topology.sh
    OracleDI: Starting Topology Manager ...
    java.lang.RuntimeException: java.sql.SQLException: ORA-12899: value too large for column "FUSION"."SNP_HOST"."HOST_NAME" (actual: 57, maximum: 35)
    java.lang.RuntimeException: java.sql.SQLException: ORA-12899: value too large for column "FUSION"."SNP_HOST"."HOST_NAME" (actual: 57, maximum: 35)
    at com.sunopsis.graphical.frame.module.SnpsSplitFrame.g(SnpsSplitFrame.java)
    at com.sunopsis.graphical.frame.module.SnpsSplitFrame.b(SnpsSplitFrame.java)
    at com.sunopsis.graphical.frame.module.SnpsSplitFrame.<init>(SnpsSplitFrame.java)
    at com.sunopsis.graphical.frame.module.SnpsSplitFrameTopology.<init>(SnpsSplitFrameTopology.java)
    at com.sunopsis.graphical.frame.module.n.a(n.java)
    at com.sunopsis.graphical.SnpsTopology.g(SnpsTopology.java)
    at com.sunopsis.graphical.SnpsTopology.main(SnpsTopology.java)
    at oracle.odi.Topology.main(Topology.java)
    Caused by: java.sql.SQLException: ORA-12899: value too large for column "FUSION"."SNP_HOST"."HOST_NAME" (actual: 57, maximum: 35)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
    at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
    at com.sunopsis.dwg.dbobj.generated.GeneratedSnpHost.insertAction(GeneratedSnpHost.java)
    at com.sunopsis.dwg.dbobj.SnpHost.insertAction(SnpHost.java)
    at com.sunopsis.dwg.DwgObject.insert(DwgObject.java)
    at com.sunopsis.dwg.DwgObject.insert(DwgObject.java)
    at com.sunopsis.dwg.dbobj.SnpHost.getSnpHostForLocalHost(SnpHost.java)
    at com.sunopsis.dwg.i.a(i.java)
    ... 8 more
    Pls advice on what to do now.

    I think the issue is because of the long host name of the machine : dhcp-hyd-phase2-ground-floor-10-176-82-232
    I have requested the IT ops guys to take a look. In the meantime, if you think I need to do something else, do let me know.

  • Add BI System in Solution manager

    Hi All,
    I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
    I will be glad if some one can post ur suggestions and procedure to add this
    Thanks

    Hi,
    this is same for all the system. only you have to select appropriate product instance
    please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
    get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
    Thanks
    Jansi

  • I need to add a new 2811 MGCP

    I have a clouster 4.1.2 and need to add a new office (external)which has a independient numeric plan.
    Some body can refresh me the rigth flow to configurate, becouse I was think:
    1.- Add Gateway to CCM clouster
    2.- Add a new translation patern to offices phones
    3.- Route patterns to external office
    4.- Route patterns to international and long distance calls
    5.- Superviability
    bud I don't know if I need a route group, a route list or create a zone
    Thank

    IF you point a route pattern to the gateway directly, you cannot add that gateway into a route group. You will have to
    a. either delete all route patterns that are pointed to the gateway in question
    b. create route group, add gateway to route group
    c. add route group to route list
    d. add route patterns and point them to the route list.
    OR
    a. add a dummy h323 gateway.
    b. repoint all route patterns to this h323 gateway. (temporary)
    c. add a route group and add the mgcp gateway in question to the route group, and add route group to a route list.
    d. repoint all route patterns to the route list
    e. delete h323 gateway.
    On the issue with calls not going out, I would check
    a. sh isdn status
    b. see if gateway is registered to callmanager
    c. sh ccm-manager
    d. debug isdn q931 - to see whats the cause code for calls not going out.
    e. if route patterns have any partitions configured, then that partition need to be accessible in the CSS configured on the phone.
    HTH
    Sankar
    PS: please remember to rate posts!

  • Need to add a new field to XD01 under company code data tab

    Hi,
    I need to add a new field under Company code data of XD01 under Account Management tab.
    I came to know two BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS can be used for this. But for these BADIs we need to create a sub screen.But for my requirement I need not use a subscreen just to add a field.
    Please let me know how to do this?

    Hello Pavan,
    Do you have any solution for this issue? I only can creat a new tab but hi prefer as you, creat a field Company code data of XD01 under Account Management tab.
    I read that is not possible, this is true?
    Best Regards,
    Eduardo Paiva

  • Need to add a device to itunes account, but must delete 1 or 2 old ones first, How?

    I need to add a device to my iTunes account, however in my account it indicates I have 5 computers associated with the account already.  I need to delete 1 or 2 old computers associated to the account.  The only option I can see in manage my account is to diassociate ALL computers...how do I delete just 1 or 2 old ones and add the new one?

    If you no longer have access to the old computers, your only option is to Deauthorize All and then reauthorize the computers you have now.

  • Need to add a second weblogic server for high availability

    I have a weblogic 10.3.3 server with forms and reports 11.1.1.3.
    I have an adminServer, WLS_FORMS and WLS_REPORTS managed servers setup.
    This was setup with the wizard, so the WLS_FORMS is in the cluster_forms cluster group and WLS_REPORTS in the cluster_reports group.
    I now need to add a second server with forms and reports also to act as one big server and provide high availability and load balancing.
    How do I achieve thsi, is there a wizard that will do this?
    The two servers are setup in exactly the same way, with the same versions of Weblogic and Forms and Reports.
    Thanks in advance.

    I do not know "reports 11.1.1.3" application, but from your description this application is already targeted on a clustered configuration.
    So it should be sufficient to add 2 new instances in the WebLogic domain "WLS_FORMS_2", "WLS_REPORTS_2", include them into the existing clusters and add a load balancer (like apache + wleblogic-plugin) that will balance requests on instances.
    I never heard of wizards to create such clustered environments. However it is not hard to do:
    1- Install binaries on the new machine
    2- Create the domain configuration directory on the new machine using config.sh wizard in the same way you have aleady done with the first machine.
    In this step you can create a clone of the existing domain, but it is enough to create a domain with the same name and the same admin instance.
    Instead of using config.sh, you can also copy the domain directory from the existing machine and change diretories in scripts if needed.
    The domain configuration is needed only to find the binaries, the basic domain files common to all installations, and to allow startup scripts (see point 4-) to connect to the admin and download the domain/instance configuration.
    3- Configure the new instances on the existing WebLogic console
    4- Create startup scripts for "WLS_FORMS_2", "WLS_REPORTS_2" on the second machine
    Bye
    Mariano

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • Need to add Chat functionality on iStore

    Hi,
    I need to add chat functionality on iStore.
    I got this link from Oracle Community forum , but i think it is applicable only to Oracle forums.
    iStore
    Any ideas please for the implementation for the chat code.
    Thanks,
    Sabitha

    You can consider setting up Call Back....
    Setting up Call Back in Oracle iStore
    After setting up Oracle iSupport and Oracle Telephony Manager, set the following profile option at the application level to iStore.
    IBE: Use Call Me Back: Set to Yes to activate the callback feature.
    The profile option defaults to No if not set.

  • ODI 10.1.3.4.0 - Topology Manager Connection Error using SQL 2005 SP3

    Hello All,
    I am using the ODI repository in SQL 2005 SP3. I could create my master repository using the following parameters:
    driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
    URL:jdbc:microsoft:sqlserver://server_name:1433;SelectMethod=direct;DataBaseName=ODI
    I needed to copy to the drivers directory all files of SQL 2000 (msutil.jar, msbase.jar,mssqlserver.jar) and SQL 2005 (sqljdbc.jar). I am using the JRE 1.4.2 and JDBC 2005 1.2 (http://msdn.microsoft.com/en-us/library/ms378422(SQL.90).aspx)
    But when I try to connect in Topology Manager to create the work repository appears the following error:
    using this driver string: com.microsoft.jdbc.sqlserver.SQLServerDriver
    java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC] Can't start a cloned connection while in manual transaction mode.
    using this driver string: com.microsoft.sqlserver.jdbc.SQLServerDriver
    java.sql.SQLException: No suitable driver
    Does Somebody know what is happening?
    Regards,
    Wallace Galvao
    Sao Paulo - Brazil

    Hi,
    If you plan on using the SQL Server 2005 drivers then you only need the 1.2 sqljdbc.jar file in the drivers directory.
    The connection details for SQL Server 2005 should be like the following.
    com.microsoft.sqlserver.jdbc.SQLServerDriver
    jdbc:sqlserver://<sqls machine>:1433;databaseName=<db name>;integratedSecurity=false
    I would try just with just the correct driver in place, remove the others, restart any ODI components and then make sure the connection information is correct like above.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Need to add extra Payment modes in Claim Advance Request

    Dear Friends,
    I need to add extra Payment modes such as Corporate Credit Card and Company Card options in Payment mode option dropdown list  in ESS Claim Advance Request against a Reimbursement type.
    Below is the original thread created by me with screen shot. As per group members suggestion diverting this query from Travel mgmt forum to SAP HCM Forum
    Need to add extra Payment modes in ESS Travel management against a Reimbursement type
    Expecting solutions from HCM Experts !!
    Regards,
    Nayak

    Dear Experts,
    Any suggestions?
    Regards,
    Nayak

Maybe you are looking for