Need to add multiple company codes to user accounts.

I am new to SRM 5.0. I have been asked to add all Non-US company codes for two users. Do I have to add it through PPOMA_BBP - under attributes-- select company code and add it there. If so, I have at least 35 Non-US company codes to add. I cannot select them all. Do I have to add them one by one. Or is there any other process? Please advise if I am doing it correctly.

Hi
If it is specific to the two users then you need to assign one by one this is the only why. But if it for then you can maitain that root leve.
regards
satish

Similar Messages

Need to add Standard transaction code to User Menu.

Hi All,
I need to add Standard transaction code to User Menu. How this can be accomplished?
Thanks

Your Security and/or Basis team probably have control of the user menu settings. On the other hand, if this is for YOUR user menu, you could choose to simply adjust your favorites.

Steps required to add multiple company code

Hi ,
If i went adding additional company code B, at present in case of e-souring in all document point to default company code A. So with this I need to know what is require to be done remove the default company code.
Please let me know is any addional changes also require by adding 2nd company code.
Thanks,
Marai

Hi,
For defaults : check the Buy side user account and assign the company code B
If you want to have a two different enterprise comapny code the create a new context and assign compnay code B ( data Scoping).
Thank you,
Mani

How do I add multiple information under an user account?

David, Thanks for all your help and I'm almost finished. Hopefully this will be the last item. I have users that register and then go to a profile page. I need them to be able to recieve multiple messages and also input multiple scores. I figured out how to do this but with only them being able to add one of each (its stored in the database table). How can store multiple items for each user (with users continuing to increase)? It's almost like I need a table for each individual user...

Thanks, but I will proceed. So getting back to my question...I figured that I needed a new table which I have. I also set up a user page based on the session MM_Username and that is working fine. I have 8 users in and everything is working fine on that end...that isn't the problem. I used the insert command to insert all data/foreign key into table2 that I needed. I need to be able to display a set of records from (table2) and when I try to use the MM_Username to filter that table, it doesn't work. My understanding was that when a user is logged in, the session for each page is MM_Username so if the tables are set up with the same information, why doesn't it work? I also inserted the table in the main loggin page and it actually does pull up the information, but even though I have the "repeat region command" it only shows the first record...it does however pull the first record for the logged in user. But doesn't work at all on another page. Please help.

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

How to schedule one report for multiple company code?

How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
points are given for ASAP replies.
Thanks in advance
Peter

Dear Peter,
Try to restrict the Company Code with those 20 values and schedule.
Regards,
Ramkumar.

Currency setting in multiple company code.

Dear all,
we are having 3 company codes in one client.
and we have to set the Currency setting for multiple company codes.
Tcodes
S_BCE_68000174 - Enter Translation Rates
S_ALR_87003642 - Open and Close Posting Periods
it is not allowing us to set the values at a same time for different company codes by different users
it says " DATA LOCKED BY OTHER USER, ONLY DISPLAY MODE."
Pls assist
Thanks

Ask for access to delete lock entries. If access is provided, use T code sm12 to delete the lock entries.
@ Irfan you cannot do that. Only one user can use a table at a time.
It is like using an ATM. Only one person can withdraw money at a time.
Edited by: Dummy_Variable on Jul 27, 2011 9:34 AM

One lockbox for multiple company codes

Is it possible to have one lockbox for multiple company codes?

No, I don't think so. Lockbox is 1:1 for a Company Code.
You configure Lockbox for a Company Code.
You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
You may find an OSS notes for intercompany clearing.
Hope this helps!

One lockbox for multiple company code

Hi Guru's.
Currently we have one company code to many lockbox configured, process
is working fine.
We are in process of merging two companies.
We have a scenario were we have one Lockbox shared between multiple
company code, when we process the lockbox file lockbox process will
clear one company code Invoice and other Invoice for different company
code are unprocessed.
We have looked in to user exit EXIT_RFEBLB20_001 and EXIT_RFEBLB20_002,
was not much of help.
Regards,
KJ

I had this scenario few years back in a company and we used exit RFEBLB20_002. We used logic to find the invoicing company code from the BSID table using the document number from lockbox file, then change the default lockbox company code to invoicing company code. Unfortunately this scenario will work only if you use unique document number ranges for each company codes which is not the case for most companies.
Edited by: PaulKr on Sep 26, 2011 9:08 PM

Vendor Master with Multiple Bank account in Multiple Company Codes

Dear Team,
We have multiple companies in our SAP environment, wherein a single vendor is extended to multiple Company Codes (Cocds). If we change the bank account in the vendor master, it is applicable to all the Cocds in which vendor is extended. Few vendors want payment in different bank accounts.
How do we address this issue?
Kindly guide.
Regards
James

Hi,
Two options without any enhancement:-
1. Use "Partner Bank Type" in Vendor Master's Payment Transaction View where you maintain vendor bank account. Each of the bank account should be assigned to unique Partner Bank Type
- Based on this setup, at time of invoice posting, user could choose which vendor bank type and base on the selection, the selected bank will be selected upon payment.
- You could also explore the option of using substitution to substitute the partner bank type upon posting if the same cocd always using the same vendor bank
2. A much simpler option, upon payment proposal - user actually could select which vendor bank they wanted to use if you've multiple vendor in the vendor master.
Thanks,
Ong Yang

Vendor Master Creation through IDoc with Multiple Company Codes

I am trying to create vendor masters sent from a 3rd party into SAP using CREMAS05 IDoc. I have the requirement that the vendor should be created in each of 3 company codes and the vendor number is internally assigned in SAP.
I create my IDoc with the general data E1LFA1M and multiple E1LFB1M & E1LFB5M Children. When I post the IDoc using IDOC_INPUT_CREMAS which uses Call Transaction, the vendor gets created for the first company code, but the IDoc errors on the vendor extension XK01 for the next company code with the error: "Fill all required fields SAPMF02K 0111 ADDR1_DATA-NAME1".
In debugging through this, it appears that the vendor number that gets created in the first XK01 transaction does not get passed into the data for the second XK01 call and SAP tries to create a new vendor instead of extending the newly created one.
If I force the value in during debug after the initial call transaction into the variable h_lifnr, it works fine (Vendor created with multiple company codes.
Any help would be greatly appreciated.
-Larry

I cannot give you exact solution, but can guess why this is happening, below is what I believe.
I think Synchronous update is not happening in call transaction, second transaction is getting processed before the first one is saved, debugging it works fine, because we give system enough time to save while processing.
Generally in call transaction we have MODE, if we pass S - then synchronous update happens, in your case, you need to find the way to incorporate this.
Hope it helps.
Regards,
Ravi Kishore.

Report sould support multiple company codes and currencies

Hi Experts,
I had requirement, my report should support multiple company codes and currencies. Right now it is supporting 2 company codes and currencies(EUR, USD) only. Now the report should support all copmany codes and currencies.
I had analyzed report. In the report there are class and authorization objects. In this authorization objects, they may be any chances of maintaining company codes and currencies? This is regarding PS Module.
Need ur suugestions to solve this issue...
Regards,
K. Bharat

Hi raja,
Could you share what you had to do to attain this functionality? I have the same requirement.
Thanks,
Kiran

Unable to assign multiple company code to a controlling area in PPOME

Hi Experts
In PPOME I was trying to assign multiple company codes under 1 controlling area in account assignment. e.g. ABC is the company, its 2 company codes, ABC1 and ABC2.
In PPOME when I am assigning the root org unit (ABC) with controlling area ABC1 and company code ABC1, it hierarchially inherits the below structure.
Whereas when I want to change the company code for ABC2 orgunit, it doesnot give the provision to change. It hierarchially inherits the root org unit structure.
I have tried to differentiate it by creating different costcentres for different companycodes, but that also doesnot help to fulfill the need.
Please help me to solve the issue as early as possible.
Warm Regards
Anwi

Hi Rajdeep
The same function can be handled from PPOME also, because in case of assignment of enterprise structure components with org structure components we use IT 1008.
However, if yours process is followed, then also I am unable to change the COMPANY CODE. Rest can be well taken care of.
Cheers
Anwi

How to upload multiple company codes data for single vendor by LSMW Idoc

Hi ,
My requ is like this.
uploading data by LSMW Idoc method
In source file we have two company codes data for single vendor.
It should create vendor for two company codes.
But its not creating its showing error.
How to handle this?
Thanks in Advance.

have you ever see this docu:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/178ac72d3011d3bc3500105a6588b2/content.htm
You can use the recording function to create a new object (or a new "import method") if neither a standard batch input program nor a standard direct input program nor the BAPI/IDoc method is available for a data object.
Recordings are static, thats why you cannot do such flexible things like multiple company codes at the same time.
But with IDOC method it is certainly possible, I have done it several times already.
Unfortunatly the creator of this thread did not say what error he got with the IDOC method. Maybe he will add this. Otherwise I dont think that anybody can help

Which of the following is required for multiple Company Codes assigned to s

Which of the following is required for multiple Company Codes assigned to same Company ?
Same Chart of Accounts
Same Currency
Same Fiscal Year

hi,
if multiple companies are dependent on each other then you have to follow the below as same for all companies.
Same CoA
Same ItemMaster Data
Same WareHouses
Same BP Master Data
Same Currency
same fiscal year
and few more master datas which ever necessary.
if they are independant on each other then no need to maintain the same codes.
regards,
varma

Need to add multiple company codes to user accounts.

Similar Messages

Maybe you are looking for