Need to add part number in MRR database

Hello All,
Need to add next part number:
256827 (PARTICION 1.4512+2B) as SAP Source in database
Database name is Tenneco MRR 2.0 on TALAKDB1
Supplier is Tenneco Edenkoben (vendor number is 1234 and it's internal)
Receiveing plant is ABC..
How to solve this.. Please help.
Regards,
Forum Shah

Hi,
Please clarify is it related to IDOC system? If yes please refer below link. what is the meaning ofNeed to add next part number? Thanking you.
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/technology/sap/19/

Similar Messages

  • I Can't Find My Product "Hp Pavilion Dv6-6c50se​" on PartSurfer​, I Need My Fan Part Number

    Hi, as i said in the Subject i can't find my product..
    Pavilion Dv6-6c50se
    my S/N: [Edited for Personal Information]
    my P/N:  A7P18EA#ABV
    now what? i really need to change my Fan and i can't get the Part Number of it..
    Please Help.
    This question was solved.
    View Solution.

    You're welcome
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • HT5824 Trying to sync, add new iphone to icloud, itunes. Need to add serial number so it can be activated. Any suggesstions?

    I need to add new phone serial number to icloud, itunes.  Find my phone keeps locating old phone. Any suggestions as to how to sync?

    I don't understand.  Won't the new iphone sync with itunes and icloud, assuming you have provided the Apple ID and password for the icloud?  Serial numbers cannot be used to connect to itunes or icloud.  Or am I misunderstanding your post?

  • Ibook g4 12.1/1.33 -model M9846LL/A - need hdd ribbon part number!! help!

    Hi,
    Quick question..
    I have an ibook g4 12.1/1.33Mh (model M9846LL/A) that was given to me, it works but but its looking for the system (hard drive) it needs a new hard drive, the problem here is that the old hard drive was taken by the former owner out with the ribbon included and I cant get in tour with him, so I need to get a new ribbon to be able to connect the new hard drive I already have - such thing missin I did not know until I opened the ibook-, I cant find such part number anywhere on the web or where to buy it... can anyone help me on this?, I have taken the hole laptop apart and just waiting for the ribbon.
    The part number for the logic board is 820-1832-A if it matters...
    Thanks
    murillo

    Thanks so much for your reply.... after looking around for a few hours I finally got the part I needed and order, this is the one:
    http://www.macrecycling.com/hard-drive-connector-ibook-g4-1214-p-100234.html
    The last ibook made (12.1/14.1 1..33Mh) was built differently (logic board) and does not use the normal ribbon (like the one you were kind to appoint, this one connect to the other side of the logic board), this logic board does not have other connection for the ribbon, just a straight adapter on the same side where the hdd is located, it just needs an adapter to connect, look at this logic board:
    http://www.macrecycling.com/logic-board-133ghz-ibook-g4-12-p-100237.html
    This one shows the actual logic board and as you can see the connection is made (on the left side of the picture just above the capacitors)...
    Finally I was able to order the part so I should be ok.. thanks so much for your time...
    Have a nice weekend.

  • Satellite A50-543: Need Heatsink cooler part number

    Help me please! I can't find this partnumber. Mail it me plz!

    Hi
    I have found a cooling module for a Satellite A50 & A55
    The part number is: P000401740
    But Im not sure if it is compatible with your A50-543
    Well, generally you can order all parts form the Toshiba service partner in your country.
    In my opinion it should be possible to find out the right part number.

  • Need laptop touchpad part number

    I have a DV6500t CTO laptop with an Intel processor and no fingerprint reader.  The touchpad buttons are starting to give out.  I don't want to use an external mouse.  Can someone provide the touchpad replacement part number.  I have no problem opening up the laptop to replace the touchpad as I've opened the laptop up before.
    TIA

    Hi,
    Please use page #29 of the second manual of the following link:
       http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=5078661
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • WHY WE NEED TO ADD PORT NUMBER 1433 TO TCP/IP PROTOCOL INSTEAD OF UDP PROTOCOL

    HELLO EVERYONE,
    WHILE INSTALLING SQL SERVER I HAD ENCOUNTERED A WARNING MESSAGE REGARDING  WINDOWS FIREWALL. AFTER SOME RESEARCH , I GOT TO KNOW THE STEPS TO TROUBLE SHOOT. IT SAYS I NEED TO GO TO WINDOWS FIREWALL AND ADD THE PORT NUMBER 1433 IN INBOUND & OUTBOUND
    SECTION USING THE PROTOCOL- TCP/IP & 1434 TO INBOUND & OUTBOUND OPTION  SECTION USING THE PROTOCOL OPTION  - UDP.
    I WANT TO KNOW CAN I ADD THE PORT NUMBER 1433 USING UDP PROTOCOL INSTEAD OF TCP/IP PROTOCOL IN FIREWALL SETTINGS ; IF NO THEN WHAT IS THE REASON?
    AND WHY CANT WE HAVE USE ONE PROTOCOL : TCP OR UPD AND ADD THE PORT NUMBERS 1433 & 1434 FOR ACCESSING SERVER & SQL BROWSER SERVICES ?
    PLEASE HELP.
    THANKS , SAURAV GHOSH
    saurav ghosh

    We need to understand how the firewall setups are done in  your environment like might be some restriction is there also need to check if IP level access are there for you or you need to get that.
    Usually in secured setup, for your application, you need to get access on IP and Port to access database server. This is good also but may be more restriction you can bring in.
    Also to update in inbound and outbound, is required too at times when you have firewall services on as this is being disabled\stop too in many setup due to application level functionality issues too.
    You can definitely go ahead and add these ports, this will not disturb you environment as you are just giving access to sql server available on host which is accessed, how? you need to check, may be your application is accessing through IP not name, application
    will look for Port on this IP.
    Check some details about it:
    http://www.bleepingcomputer.com/tutorials/tcp-and-udp-ports-explained/
    Also:
    TCP 1433
    TCP port 1433 is the default port for SQL Server. This port is also the official Internet Assigned Number Authority (IANA) socket number for SQL Server. Client systems use TCP 1433 to connect to the database engine; SQL Server Management Studio (SSMS) uses
    the port to manage SQL Server instances across the network. You can reconfigure SQL Server to listen on a different port, but 1433 is by far the most common implementation.
    UDP 1434
    UDP port 1434 is used for SQL Server named instances. The SQL Server Browser service listens on this port for incoming connections to a named instance. The service then responds to the client with the TCP port number for the requested named instance.
    The SQL Server Browser service listens for incoming connections to a named instance and provides the client the TCP port number that corresponds to that named instance. Normally the SQL Server Browser service is started whenever named instances of the Database
    Engine are used. The SQL Server Browser service does not have to be started if the client is configured to connect to the specific port of the named instance.
    Understanding this requirement:
    http://support.microsoft.com/kb/287932/en-us
    Good link: http://msdn.microsoft.com/en-in/library/cc646023.aspx
    Hope this helps.
    Santosh Singh

  • OIM 11gR2 - Identity console - Search Users Page.  Need to add employee number by default.

    Hi,
    I am new to oim 11gR2.  I have a requirement , to add the employee number field in the user search box. I do not want to use the Add Fields button to add the employee number search field.
    When any user goes to the search page, they must find the employee number field in the search box in addition to the other default fields like lastname, firstname, etc.  Is it achievable? Thanks in advance.  
    If possible.... can you please provide the steps to achieve it?.. thanks

    Karthik Perath
    Thanks for the answer....... but I guess you misread the question.  I am able to add new fields as columns to the search results table.  My problem is I want to add the searchable field to the query form.  Also, I do not want to use the Add Fields button (because that is a part of Saved Search which is Personalization and limited only to the creator) , I want the newly added searchable field. for example Employee Number ( which is not there by default)  to be made available to all the end users of Identity Self Service system..... Hope you got the problem... 

  • Satellite 3000-514: Need FL inverter part number

    Hi,
    I am looking for an inverter for my toshiba satellite 3000-514, because my display is almost dark. Does anybody know where I can buy/order it or what the product number is?
    Thx
    arne

    Hi
    Well, a friend of mine has ordered some parts from the Toshiba service partner.
    I assume you can also order the FL inverter from the ASP in you country.
    As far as I can remember the FL inverter is not very expensive. But do you know how to change it?? Do you have enough experience to replace it??
    I think its a very risky procedure because the whole screen must be removed. And you know; the screen is a one of the most expensive parts on the notebook.
    I think if you dont be any technician so ask someone who has more experience in such reparation procedures. The best way is to ask the service guys.

  • Qosmio G20 AC Adapter damge - need IC chip part number

    Hi,
    My Toshiba Qosmio g20 AC Adapter has been damaged due to an electrical short circuit.
    It's 8-pin IC Chip inside the board has been completely burn out so that i could not even read the part no of that IC chip.
    If some one knows its part no, please let me know.
    Technical Details :
    Toshiba AC Adapter - PA3237U - 1ACA
    Input 100-240V ~ 2A
    Output 15V - 8A
    Thanks,
    ABHI

    I have a continuing problem with the power adapter socket into the laptop. It has always been loose and has caused charging difficulties. Eventually the adapter broke and I purchased another and the same thing happened! I am on my 4th adapter which has now stopped working! Is there any way the socket can be changed for something a little more robust?
    I know I sound like a clumsy klutz but there are three other laptops in the house which have never given me any problems.
    Can anyone out there advise or help?

  • Cable part number

    I need a cale part number thats connected to a port adapter PA-4E1G-120 having G.703 conector at one end and the other end having UTP RJ-45. The length of the cable should be 8 mitres.
    I found the cable as CAB-E1-RJ45(=). But unable to find the price anywhere in cisco. I need to know whether this cable is available or not. If available what is the price.
    The reference doc that i got regarding this is http://www.optimumdata.com/shop/files/cisco/7200vxr/7200VXRPA-4E1GE1-G703-G704SerialPortAdapterInstallandConfig.pdf

    Forget the cable, they were always a rare find. Get a g.703 75/120 ohm balun and use a normal RJ45 cable and normal coax cable to make it the length you need. All you need to do is convert the impedance, which is what the balun does for you. I see from your profile you are in India, but you should be able to get locally. In the UK you can get the balun from Black Box. See http://www.blackbox.co.uk/solutions/display.asp?cs=min&id=1&doc=mt242a-m&tx=WAN&sx=G.703/G.704%20Converters#moreinfo

  • RAM part number needed

    I want to upgrade the RAM in my HP 2000-2d64TU. It currently has 4GB SODIMM Kingston 1600MHz RAM and I want to add another 4GB, I assume I can add another the same as what is already installed. I am having trouble finding the right part number as various RAM suppliers, including Kingston, don't list this HP notebook model.  There seems to be a lot of variation and many types of RAM that have the same specs but different part numbers, so presumably are not exactly the same. I haven't installed RAM before and want to be sure I get the right type. Can anyone help?
    This question was solved.
    View Solution.

    Hi,
    Part number is on page #51 of the first manual on the following link:
       http://support.hp.com/us-en/product/HP-2000-Notebook-PC-series/5375422/model/6622534/manuals
    Yes, to be able to get full benefit of dual channel, you need to use SAME specs of RAM in two slots, even same manufacturer. The above manual also shows you how to add/replace RAM.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Add Supplier Part Number  Special Request in SC

    Hi Experts,
    My req is that need to add Supllier part number (PARTNER_PROD) in SC for Special Request (Describe Requirement.)
    This field is there when you select the Material from Catalog but If you go to special request (Describe Req) will not be there. This is not Custom field . The Partner number field is there in the I_ITEM structure-BBP_PD_SC_GETDETAIL.
    Just I want add this field in special req and store into I_ITEM strucutre.
    Can you anybody help me out this.....
    Regards,
    Kumar S

    Hi
    Which SRM version are you using ?
    <u>We have handled these type of requirements in our earlier SRM implementations.
    As Ramki told, OSS note 672960 and 485891 are for adding custom fields on the shopping cart item level.
    Since this field is not visible in Describe requirement section of the shopping cart, you need to add a custom field as this will not involve any HTML templates modification.
    Incase you don't want to add a custom field then you need to make  modification to HTML templates and it might become quite complex to handle this in future.
    Therefore, it's recommended that you should go with adding a  custom field and map the data coming from catalog values to this custom field inside the BBP_DOC_CHANGE_BADI to suit your requirements.
    Incase you need any help, in order to suit your requirements, do let me know.</u>
    Hope this will help.
    Regards
    - Atul

  • Portege R600-13Z: Need screen part number - UK suppliers?

    Portege R600-13Z
    Need to buy a new screen - UK Suppliers or a Part Number needed?
    Many Thanks

    Hi
    I dont know the part number but as far as I know you need a *12.1 WXGA (1280x800) matte widescreen* .
    Usually any 12.1 WXGA (1280x800) matte widescreen should be compatible with Portege R600.
    But if you want you can get in contact with an local Toshiba ASP and could order such screen from the guys
    Here you an find a database with all ASPs worldwide:
    http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT
    Good luck

  • Need to add number of days to users end date.

    Hi,
    I have a code where we are adding number of days(30) to current date and then updating user's end date in IDM DB.
    Now we have a requirement where we need to add number of days(30) to existing end date of user instead of adding to current date.
    *public String incrementDate(int daysToAdd)
         // Start date
         log.info("NotifyLastDayOfService::incrementDate(): Enter");
         SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
         Calendar c = Calendar.getInstance();
         c.add(Calendar.DATE, daysToAdd); // number of days to add
         String newDate = sdf.format(c.getTime());
         log.info("NotifyLastDayOfService::incrementDate(): Exit");
         return newDate;
    Have any body implemented this scenario?
    Please suggest.
    Thanks,
    Kalpana.

    Hi Nayan,
    Here is the code:
    System.out.println("----inside increment date method-----");     
              HashMap<String, String> hm = new HashMap<String, String>();
              HashMap<String,Date> modifyMap=new HashMap<String,Date>();
              SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
              tcResultSet usrList = null;
         String enddate = null;
         hm.put("Users.Key",usrKey );
         try {
         usrList = this.usrIntf.findUsers(hm);
         usrList.goToRow(0);
         Date endDate =usrList.getDate("Users.End Date");
         System.out.println("-----users end date-----"+endDate);
         String userEndDate=sdf.format(endDate);
         System.out.println("-----String value of users end date-----"+userEndDate);
         Calendar cal=null;
         System.out.println("-----Calender date-----"+cal);
         cal.setTime(endDate);
         System.out.println("-----end date-----"+endDate);
    cal.add(Calendar.DATE, Integer.parseInt(daysToAdd)); // number of days to add
    Date newEnddate = cal.getTime();
    System.out.println("-----new end date-----"+newEnddate);
    //usrList.setEndDate(Edate);
    modifyMap.put(userEndDate,newEnddate);
    usrIntf.updateUser(usrList, modifyMap);
    System.out.println("updated user's end date in OIM DB");
    //System.out.println("-----updated user's end date in OIM DB-----");
    logger.info("NotifyLastDayOfService::incrementDate(): Exit");
         System.out.println("-----new date-----");
         } catch (tcAPIException e) {
         logger.error("Error in finding end date for user" + e);
         } catch (tcColumnNotFoundException e) {
         logger.error("Error in finding end date for user" + e);
    In th log file, I can see that the code is not executing this line:
    cal.setTime(endDate);
    end date is of type Date and stores users end date from DB. Please help in resolving this issue.
    Thakns,
    Kalpana.

Maybe you are looking for