Need to add site mailbox back

Hello,
We are using O365 with sharepoint online, I created a site mailbox, the mailbox was added to my outlook client. I then remove it from my outlook client, using the 'close' option. Now my question is, how can I add it back ?
I tried removing myself from ownership of the sharepoint site, and adding me back, I tried adding additional mailbox, but outlook doesn't recognize the mailbox name...

Have you thought about doing a Time Machine Restore? Just back up ant new information created after the deleted user and restore your server to a date before the deleted account.

Similar Messages

SharePoint 2013 Site Mailbox Problem

I'm Trying to add Site Mailbox to a Subsite (Https://Sharepoint.Contoso.com/Department/SubSite) but when I add it, it get me this
error:
Your mailbox is not ready to use at the moment
It can take up to 30 minutes for a new site mailbox to be ready for first use. If your site mailbox is newly created, please check back on this page after a short while. If this message persists for more than 30 minutes, please contact your system administrator.
Correlation ID: a2d7979c-7b60-40fa-c849-6c685fd3d51c, Error Code 3
6/5/2014 12:12:46 PM

06/05/2014 12:55:25.85 w3wp.exe (0x3354) 0x39B4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:https://SharePoint.Contoso.com:443/SiteCollection/SubSite/_vti_bin/client.svc/ProcessQuery) 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.85 w3wp.exe (0x3354) 0x39B4 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.85 w3wp.exe (0x3354) 0x39B4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|Contoso\User, ClaimsCount=33 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.87 w3wp.exe (0x3354) 0x4790 SharePoint Foundation CSOM agw10 Medium Begin CSOM Request ManagedThreadId=33, NativeThreadId=18320 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.87 w3wp.exe (0x3354) 0x4790 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/SitrCollection 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.87 w3wp.exe (0x3354) 0x4790 SharePoint Portal Server Microfeeds aizmk High serviceHost_RequestExecuting 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.88 w3wp.exe (0x3354) 0x4790 SharePoint Foundation Application Authentication aiv3l High Token request correlation id: '52d3979c-9bd2-40fa-c849-6b130a343f12'. 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x4790 SharePoint Server Search Exchange Integration aiwxi Medium SearchServiceApplication::ExchangeAdapter::SharePoint CorrelationId:13da979c-1b22-40fa-c849-6e9c5dd1ae27; Exchange Request Id:97727bc0-e340-42e2-80bd-a6ba5b278cbb; Diagnostic Info: 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x4790 SharePoint Server Search Exchange Integration ai1pi Medium Autodiscover Diagnostics EWS Client Version: 15.00.0516.014 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x4790 SharePoint Server Search Exchange Integration ai1pj Medium Autodiscover Diagnostics Response Headers: Transfer-Encoding: chunked request-id: 97727bc0-e340-42e2-80bd-a6ba5b278cbb client-request-id: 13da979c-1b22-40fa-c849-6e9c5dd1ae27 X-CalculatedBETarget: MailServer.Contoso.com X-DiagInfo: MailServer X-BEServer: MailServer X-FEServer: ClientAccessServer Cache-Control: private Content-Type: text/xml; charset=utf-8 Date: Thu, 05 Jun 2014 09:55:25 GMT Set-Cookie: X-BackEndCookie=OrganizationAnchor@=u56Lnp2ejJqBmsyZnsnNmZrSzJ7Mm9LLxpvG0secyZnSyJudy8vNnM/Mm8acgYHPydDPytDNz87L387Pxc/Kxc3K; expires=Thu, 05-Jun-2014 10:05:25 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.0 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x4790 SharePoint Portal Server Microfeeds aizmj High serviceHost_RequestExecuted 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x4790 SharePoint Foundation CSOM agw11 Medium End CSOM Request. Duration=40 milliseconds. 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x5138 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,6 ajji6,5 agb9s,2 agw10,10 aizmk,14 aiv3l,15 aiwxi,0 ai1pi,0 ai1pj,0 aizmj,0 agw11 13da979c-1b22-40fa-c849-6e9c5dd1ae27
06/05/2014 12:55:25.90 w3wp.exe (0x3354) 0x5138 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:https://SharePoint.Contoso.com:443/SiteCollection/SubSite/_vti_bin/client.svc/ProcessQuery)). Execution Time=57.0307 13da979c-1b22-40fa-c849-6e9c5dd1ae27

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

Can I download an iWeb site so that I can change the html? I need to add a better blog and also some SEO.

Can I download an iWeb site so that I can change the html? I need to add a better blog and also some SEO.

Where is your site hosted? If it's hosted on MobileMe you can use SEO to edit the site online. No need to get it locally.
If the site is hosted with a 3rd party fpt client then publish your site to a folder on your hard drive, use SEO on it there and then upload the site to your server with a 3rd party ftp client.
What do you mean "add a better blog"?
OT

Add Existing DP back to Site?

Hi,
we had a configuration where DPs were configured to pull their content from a secondary site. After a failed site recovery of the secondary site and having to delete the secondary site and reinstall it, all corresponding DPs were automatically removed from
SCCM (why!?).
We now have the problem, that we would like to add these already existing DPs back to SCCM, as the content is already on the servers and we don't want a content transfer to initiate, as our WAN to these specific sites is extremely slow. Is there any possibility
to add the DPs back to SCCM without having to reassign the DP role and go through a content transfer all over again!?
Best Regards,
Fred

Hi Jason,
thanks for the reply. I still don't understand the logic of that behaviour. It was a Secondary Site - why completely remove the DPs from the entire system and not reassign them to the Primary Site or at least keep them in the ConfigMgr Environment? Why remove
them completely from the entire system?
Oh well... learnt it the hard way this time then -.-
Cheers,
Fred
Edit: Re-adding the DP sadly initiates a complete content transfer as soon as the DP is added to the appropriate DP Group, even though the entire content is already on the DP. Will try prestaged content.

Need to add trusted sites to safari

i just got a new imac...have a older 24"...for some reason pop up blocker is locked and it stated once i needed to add a website to a trusted site to open...cannot seem to find where to fix

Hello ..
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Block pop-up windows
If that box was not selected, you may have an extension installed to block pop ups.
Check Safari > Preferences > Extensions

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

Exchange doesn't create site mailbox

Hi everyone, I have Exchange server 2013 sp1 (15.0.847.31) and Sharepoint server 2013 (15.0.4535.1000). I configured SP and exchange for site mailbox (http://technet.microsoft.com/en-us/library/jj552524%28v=office.15%29.aspx), but sharepoint/exchange was
not creating site mailbox. If I create site mailbox manually (new-sitemailbox cmdlet), everything working fine. If I try create site mailbox from Sharepoint site, I was redirected to exchange OWA (personal mailbox) and site mailbox was not created.
any ideas why site mailbox is not creating automatically?

Hi Konstantin
I think your problem is related to Exchange delegation. As you are creating site mailbox, so to become a “mailbox administrator”, you need to do the following: -
You need to provide apposite rights for the Mailbox Administrator user account on the OU. The user accounts exist in here so that Mailbox Administrator user account can read/write all user attributes.
Add the Mailbox Administrator user account to the local overseer group on the mailbox server cluster.
I hope that you find this information useful.
---- Ashish@V

Unable to configure site mailbox at the sub site level and new site collections created

hi all,
i am trying to get the site mailbox up in my SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and what are the steps i needed to perform on exchange server level.

hi all,
i am trying to get the site mailbox up in my SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and what are the steps i needed to perform on exchange server level.

Need to add WinXP to system

I'm currently running Mountain Lion on a 2TB, single partition hard drive.
I need to add a WinXP partition.
Mountain Lion's Bootcamp Assistant only supports Win7.
How can I add a WinXP?
Thanks
-Mike
P.S.
For those on this site who love a mystery, here's one for you.
And for those who can solve it, you'll have my eternal gratitude. :-D
I've attempted going back to Snow Leopard (which is the OS that came on my system when I bought it from Apple 2 yrs ago.)
However, when the install process gets to the point where I choose the disk to install SL on, the installer shows an exclamation icon over it and a message in the installer window says "Mac OS X cannot start up from this disk."
What!?!? This is my one and only startup disk and am always starting up on it.
Ideas?

Thanks Allan and Bob. You've both confirmed my suspicions and helped me decide on a solution.
Here's my theories:
1) In order to maximize efficiency, Apple has chosen not to support WinXP in Lion and later Bootcamp solutions. Otherwise, they would have to provide XP drivers for all of the hardware options available in addition to drivers for Win7, perhaps forcing them to supply and maintain several DVDs. I understand this thinking. I'm thinking that this may be why ML Bootcamp Assistant only supports Win7.
2) I then thought, well, I'll simply add an additional partition to the end of my HD using Disk Utility and install XP on that new partition formatted as FAT32. I'd then insert my XP disk, boot into that disk upon startup using the Option key and then choose this new partition for the install when the XP installer requests that I choose an install partition. The problem I discovered in this situation is that XP cannot see that last partition, precluding me from choosing it as an option for the install (Remember I'm installing onto a partition located at the end of a 2TB drive). Perhaps the XP installer was not built to even detect partitions located at this distance on such a large drive.
This seems to indicate that Bootcamp Assistant for Snow Leopard must provide some mapping scheme when it partitions these large drives that allows XP to see this distant partition during the install process.
3) Ok, I then figured, I'll simply run Snow Leopard's Bootcamp Assistant in Mountain Lion and create and install XP that way. Well, it turns out that SL's Bootcamp Assistant gets confused about the partitioned setup in Mountain Lion and issues a message stating "The startup disk cannot be partitioned or restored to a single partition". This seems to indicate that ML has altered the partition information on the HD in a way the confuses SL's understanding of it.
4) Finally, I attempted to simply re-install SL by inserting the original DVD supplied with my iMac into the drive, rebooting into that DVD upon startup and then installing from this DVD. Well, this produces the result I described in the P.S. in my first post in this thread.
Well, those are my theories at this point. Any further clarifications or rebuttals? :-D
I think I'll try either Allan's or Bob's (or both) solutions next.
Thanks again.
-Mike

Add site system roles disabled

SCCM 2012 SP1 R2 , One primary , no CAS
I added a cloud distribution point for testing and learning. Today I removed the cloud distribution point and deleted my azure subscription as wel..
After removing the distribution point I noticed that local distribution point on primary is removed too. and When I to site server and right click to add " Add site server roles" . The setting is disabled.
How to enable this setting back ?
Thanks

Then you should call Microsoft support (CSS) to get that fixed (as you need to modify the database in order to get things up and running again).
Torsten Meringer | http://www.mssccmfaq.de

Do I need to add Base Station MAC address to list?

Hi, If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses??? I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out??? I doubt that address needs to be included but I would like some feedback on that.
Second, does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on??? If that was the case, I would just turn off MAC address filtering why guests were present.
thanks.. bob

If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses???
No. Timed Access would be for wireless devices....computers, mobile devices, printer, etc., that are connecting to the Time Capsule. The Time Capsule does not connect to itself in this regard.
I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out???
Sometimes, users lock themselves out by mistake by entering incorrect times for devices to connect, and they often forget that they can connect to the base station using an Ethernet connection and get back in that way.....since Timed Access only applies to devices that connect using wireless.
does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on???
Yes

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

Need to add a link on Page title bar

HI,
Can i know how can i add a link on page title bar.
When i click on that link, it should open a page in a separate window.
Regards,
Raju

Hi,
i am talking about portal only.
once you login, you can see history, back and forward links on top of page title bar.
Now i need to add one more link just beside history.
Can you please give me brief idea on customisation of page title bar.
Regards,
Raju

I hit the remove device button on itunes. How do i add my iphone back?

i hit the remove device button on itunes. How do i add my iphone back?

You will either need to use iTunes Match or automatic downloads on it, or redownload some of your past purchases.
Associating a device to an account : http://support.apple.com/kb/HT4627

Need to add site mailbox back

Similar Messages

Maybe you are looking for