Need to apply a video filter to entire sequence...

Hey gang-
I'd really like to apply some filters (such as some color correctors and such) to an entire sequence. Same filter on all video. Copy and paste seems like a terrible waste of time, and short of exporting it and "flattening" it to it's own quicktime, I don't know how.
Thanks in advance....

Many ways:
1. Do it for one, then use the Select All Tracks Forward button (one of the forward arrows in the toolbar next to the audio meters) and drag the name of the filter from the Filters tab in the first clip onto the selected clips.
2. Do it for one clip, then copy the clip. Select all the others, then ctrl-click and go to Paste Attributes. Then select Filters.
3. Create a new sequence, then drag the old sequence into the new one. This will nest the sequence. Apply the color correction to the nested clip. This is probably the most flexible as it is much easier to make changes to the filters later on.

Similar Messages

Can I apply proc amp filter to entire sequence like in Avid land?

Was up against a white sky and dark skinned people. Of course I exposed for the skintones,
so now I'm stuck with non-broadcast safe white levels. When in Avid land I remember being able to
create a new video track and apply the proc amp filter there. Is this somehow possible in FCP 6?
Yes, it's for air, and yes, I know broadcasters have limiters. Any suggestions?

Nesting the Sequence will allow you to apply a filter to eveything at once.
Another way, do one clip and adjust the filter to your taste. Right click that clip on the Timeline and copy it.
Highlight all other clips, right click and choose "Paste Attributes > Filters" That will apply the same setting to all the others and you can still tweak individual shots if they don't look quite right.

Applying a transition to an entire sequence?

Is there a way to bulk-apply a transition to an entire sequence? For instance, if I have a multi-clip edited with just straight-cuts, and want each cut to be a cross-dissolve? It takes forever to apply a transition to each cut afterwards. Thank you!

Set your default transition.
Then select the complete sequence timeline and drag it into the canvas choosing the overwrite with transition.

How do I apply a desaturation filter across entire timeline?

I'm wondering how to apply a desaturation filter across the entire timeline of a short film I've built without having to drag and drop the filter into every clip (there are many). Is it as simple as copy/paste, because I tried that and it didn't seem to work.
Thanks in advance for your answers.

A couple of ways to do it:
1. Apply the filter to one clip and adjust as needed. Copy the clip (Command c). Select (highlight) all other clips to which you want to apply the filter, right-click on one and select "Paste Attributes." When the Paste Attributes window opens, click the Filters box on the Video side.
2. Apply the filter to one clip then adjust as needed in the Viewer window's Filter tab. In the Timeline, select (highlight) all other clips to which you want to apply the filter. Drag the filter from the clip in the Viewer to the highlighted clips in the Timeline.
-DH

Applying one video filter to multiple clips

How do I apply just one video filter to multiple clips on a timeline in FCP7? "Copy and paste attributes" does not give me the control to select just one filter to apply, for example there is a color corrector and sharpen filter in the copied clip and all I want to paste is sharpen.

Double click on a clip on the timeline that has the sharpness filter with the settings you want to apply to additional clips.
When that clip has loaded to the viewer, click on the filters tab. You will see a list of all the filters you have applied.
Now, on the timeline, select all the clips you want to apply that filter to (you can hold down the Command key while clicking on the clips to select multiple clips).
Once the destination clips are selected, move your cursor to the Viewer window Filters tab display, and click down on the Sharpness filter and drag it to any one of the selected clips on the timeline.
It will be applied to all clips.
MtD

Applying video filter to selected area in clip

Good morning all
I'm sure it can be done but, for the life of me I cant figure it out ...
Can I or how do I apply a video filter to a selected portion of a clip ?
In other words what I would like to do is, just as I can in a photo editor free select my target , invert my selection and, apply a filter surrounding just what I have selected ...
I hope that makes sense ..
Thanks

Working with video isn't like working with still images (unless you export an image sequence). However, a few filters (like FCP's 3-Way Color Corrector) have a 'limit effect' feature and do allow you to select portions of the image based on hue.
For other filters/effects, you'll need to duplicate the clip above itself on the Timeline. Apply the filter you want to use to the upper clip. Also apply a garbage matte to the upper copy of the clip. Set the garbage matte so it outlines the area of the image to which you want to apply the effect. You can feather the edges of the matte if needed to soften the transition between the matted area and the unaffected area.
-DH

Apply video filter to many clips at once?

I have a 'sub' sequence that I have embedded into my main sequence and I want to apply a video filter mask (feathered oval) to make the sequence look like its projected from an old film projector. I don't want to apply the filter to each individual clip in my sub sequence because there are many. What is the best approach to doing this? thanks!
(FCP 5.12)

OK - so I used the word 'embedded' and I think I meant 'nested' - so how exactly do I apply the effect to the nested sequence? I tried and can't seem to make it work - e.g. when I double click on the sequence to open it in the viewer, it opens the nested sequence as its own sequence instead - I can't open it in the viewer to apply the filter.

Steps to apply Sysdate-7 filter in 11g

Hi need to apply sysdate - 7 filter for user activity reports ,Can anyone helps with steps...
regards,
891105
Edited by: 891105 on Feb 3, 2012 6:34 AM

Hi
1: go to Rpd -> intialization block.
2. Create a new intialization block.
3. Edit Data source select datasource type as database.
4. Edit default intialization string with "Select Sysdate - 7 from dual"
5. Assign connection pool and also choose refresh interval time for the variable.
6. Click test to view results.
7. Now click on edit data target button
8. Create server variable
9. Click Ok, Close variable manager, save rpd.
10. Now create prompts with Date-Calendar control and assign default value with server variable and also create new presentation variables as shown below in the below link.
11. Use the presentation variable as your filter.
Follow the below link which represents the same: Except use the above query and create only one presentation varaible:
http://tipsonobiee.blogspot.com/2009/07/in-between-calendar-control-with.html

Effect to Affect Entire Sequence?

Is there a way to apply an effect to an entire sequence without nesting the sequence into another sequence? In avid you just apply an effect like a matte to an empty video track above a large section of video and affect a whole range of clips. Is there a way to do that?
I'm also wondering if there is a way to remove effects from a selection of clips without loading each clip individually in the browser?
Thanks,
S

Other than using the method Jim mentioned (which also works for copying attributes (filters etc) to other clips.
Add effect to first clip.
Get it looking the way you want.
Select all other clips you want the effect to affect.
Open FILTERS tab in viewer.
Click and drag effect or effects to selected clips in timeline.
rh

How can I apply an image filter to an entire Applet?

Hey there,
I was wondering, is it possible to apply an image filter of sorts to an entire applet rather than to images? I'm writing a little game in java for a university project and basically I'm only using functions like drawrect and drawpolygon etc, and I want to apply fairly simple filters like blur etc. Is there any way I can achieve this kind of effect with the draw functions?
Thanks
-Spec

You might do better in the 2-D or Swing forums.
I don't have an answer, but it's an intriging problem. Basically you need to get all the components to paint themselves into the graphics context of an offscreen buffer, then apply the transformation, then paint the buffer onto the screen.
(Some hackery must be involved though. For instance blurring, by definition, means that components will have an onscreen appearance outside their bounds. So you are sort of fighting against Swing's painting mechanism - if a portion of your applet, close to but outside the bounds of a particular component, becomes visible that component will have to redraw itself, although Swing won't know that.)
2-d - http://forum.java.sun.com/forum.jspa?forumID=20
swing - http://forum.java.sun.com/forum.jspa?forumID=57

How do I apply AUTO COLOR to an entire 2-hour .mov video?

How do I apply AUTO COLOR to an entire 2-hour .mov video, please?

Hi,
Image > Auto Color results can be achieved by setting the Auto options of Curves.
1. Open .mov file in Photoshop CS6
2. Click on the Curves icon in the Adjustments panel.
3. Opt/Alt click on [Auto] button.
4. Set Algorithms radio button to "Find Dark & Light Colors", then click [OK].
- (My notes indicate that "Snap Neutral Midtones" should be ON also, but I'm not seeing that to be true.)
Result: The Curves adjustment layer that uses the same algorithms as Auto Color is applied to the entire clip.
The Auto Image adjustments can be accessed via the Curves' Auto options:
Image > Auto Levels = Enhance Per Channel Contrast algorithm
Image > Auto Contrast = Enhance Monochromatic Contrast algorithm
Image > Auto Color = Find Dark & Light Colors + Snap Neutral Midtones ON
Hope that helps!
Meredith

Final cut pro quits when video filter is applied

This is a new one on me...
I Installed FCP (studio 3) on a couple of macs at work, only to find that whenever a video filter is applied, it crashes out. Transitions fine. Generators fine. Prefs trashed. Permissions fixed. Tried it on ProRes and DV footage with the same result.
Any ideas?!
A
Mac Pro, OS 10.6.8

If you see this problem on multiple macs, there must be a common denominator. Is there any antivirus software installed on the systems? Are you using network storage?
do you have any 3rd party filters installed?
Did you use preference manager to trash preferences?
https://discussions.apple.com/docs/DOC-2491
This is the foolproof way to delete preferences.
And here are some more troubleshooting tips
https://discussions.apple.com/docs/DOC-2591

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

Applying Oil Paint Filter to Large Scale Images

I need to apply the effects available from the Oil Paint filter to very large, 80mb images. The filter works exactly as I need it to on small images, but not at large scale. A comment I have heard in a Lynda.com video on the Oil Paint filter mentioned that the filter does not work well on large images. However, I REALLY need this, even if I need to pay someone to write a program that can do it! Does anyone know if / how I can get the filter to work for large images and / or if there is a third-party plug-in that will provide the same results? Having this filter work on large scale images could make or break a business idea I have so finding a solution is extremely important to me.

What's the problem you're having with applying it to an 80 MB image? Is it that the effects don't scale up enough?
Technically it can run on large images if you have the computer resources... I've just successfully applied it to an 80 MB image, and with the sliders turned all the way up it looks pretty oil painty, though it kind of drops back into a realistic looking photo when zoomed out...
If it's just that the sliders can't go high enough, given that it's a very abstract look you're trying to achieve, have you considered applying it at a downsized resolution, then upsampling, then maybe applying it again? This is done that way...
Oh, and by the way, Oil Paint has been removed from Photoshop CC 2014, so if you're planning a business based on automatically turning people's large photos into oil paintings you should assume you'll be stuck with running the older Photoshop version.
-Noel

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
Open an Mp4 movie
Choose filter, lens correction
Choose dii
choose Phantom FC200
click ok and the image improves.
I then save as a name.psd and close the file.
I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
What am I doing wrong? If you can help me I would be very grateful.
Marc

AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

Need to apply a video filter to entire sequence...

Similar Messages

Maybe you are looking for