Need to apply PATCH&HF for other nodes??

Hi guys,
I got one confuse. I have host A to be DB HOST(ORACLE 9205), Host B& host C to be cluster nodes for EP6 SP2 PATCH4 HF7. I installed portal & CM on HOST B, applied PATCH4 HF7, then applied CM PATCH 4 HF5. very thing work fine than I installed addtional dialog instance at host C.
the problem is , when host C 's server node startup, there is a CM startup error in the console log. the error msg. is :
com.sapportals.wcm.repository.ResourceException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing plugin /cm/utilities/connection_pools
I make sure the config_local.properties file is ok, SAPWCM's password is ok too.
after I install the dialog instance, I didn't apply any patches for host C , is that right? please guide me

Hi Jochen,
My problem is due to I got 4 server nodes, the connections to the ORACLE is too much. There is a note mentioned how to increase ORACLE's default process and session no. Search "oracle process 80" at OSS you can find that note.
wish this can help you.
Ben

Similar Messages

MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade

DB:11.2.0.3.0
OS: IBM AIX Power system 64 bits 6.1
Hi All,
MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade. We are upgrading from 11.5.10.2.0 to 12.1.1
Could anyone please share why the script takes so much of time to run?
Thanks for your time
Regards,a1_win

As per Mscobjcl.Sql Is Running Long While Applying Patch.8671960 (Doc ID 1295881.1)
The patch is already applied in the instance
BUG_NUMBER CREATION_DATE
8671960 19-SEP-10
Thanks,
a1_win

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Urgent help needed while applying patch for upgrade with conflicts

I try to upgrade 11.2.0.2 to 11.2.0.3 on LInux environment.
I have to apply patch P1253900 before the upgrade per oracle doc.
however I got following conflict:
Verifying environment and performing prerequisite checks...
Checking skip_duplicate
Checking skip_subset
Conflicts/Supersets for each patch are:
Patch : 12539000
Conflict with 12827726
Conflict details:
/u01/app/grid/product/11.2.0/grid/lib/libserver11.a:/ksxp.o
Following patches have conflicts: [ 12827726 12539000 ]
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
I checked above oracle note, and did not say any resolution.
If anybody had the same issue before, please help me with the resolution.
Thanks in advance.

Follow the steps in this MOS Doc
Database Patch conflict resolution [ID 1321267.1]
This MOS Doc is referenced in 1299688.1
HTH
Srini

Applying patches to physical standby node(Data Guard 10.2.0.3)

Hello,
I have a data guard 10.2.0.3 environment (1 primary and 1 physical standby on a separate node) on solaris 10 and i want to document the procedure in applying patches to this environment.
I saw the article in Metalink Note 278641.1 which describes the procedure in applying a patchset to both nodes. It looks like both nodes need to be down before applying the oracle patchset.
Can we not apply the patches on only the standby while the primary stays up and running? My guess is you can't if the patches are significant i.e. it changes versions of the oracle binaries. But i want to confirm this.
Also, if we are applying solaris patches, i.e. nothing related to Oracle, we should be able to just apply them to the standby while keeping the primary up and running right?
The following has worked so far but i wanted to find some documentation that confirms it's ok.
1. shutdown oracle on standby node.
2. apply solaris patches...
3. restart oracle on standby node and put in managed recovery mode.
Any comments are appreciated.
Thanks.

Hi
Did you get an answer for your question yet? I have the same problem with one of our databases. Would be very nice, if you could tell me.
Regards
Felix

Need to apply patch!

Hi,
I need to apply a patch. How can I apply the patch?
Thanks,
Jhon

Steps to apply an application patch:
- Stop all application services (keep the database and the database listener up and running)
- Download the patch from Metalink
- Copy the patch file to any directory (i.e. /u04/patches)
- As 'applmgr' do the following:
- Source the environment file
- $ cd /u04/patches
- Type 'unzip <patch_number>.zip'
- cd <patch_number>
- Type 'adpatch'
- When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
Apply the patch on the database tier first then on the application tier.
Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
And, always follow the steps in the patch README file.
For more details about applying patches, please refer to:
"Oracle Applications Maintenance Utilities" manual
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
How to apply EBS 12i pathces in both Linux and Windows
Re: How to apply EBS 12i pathces in both Linux and Windows

Need to download patch 5337014 for ODBC error

Hi All,
I am not abled to down load patch 5337014 for ODBC error .
If you have this patch please mail me at <email address removed by moderator>
I need it.Its very urgent

user11691341 wrote:
Hi All,
I am not abled to down load patch 5337014 for ODBC error .
Why are you not able to download it?
If you have this patch please mail me at <email address removed by moderator>
Anyone who provides you with that will be in violation of their MOS usage agreement.
I need it.Its very urgentThis is a forum of peer volunteers. There is no "urgent" here.

Applied patch 6194129 for Report builder 6.0.8.28 WindowsXP

Hi hussein,
I have already applied the patch 6194129 for my windowsXP for Oracle Apps 11i reports and revision.
My Oracle Report at Linux Apps server is also 6.0.8.28.
I copied the report from the Oracle Apps server side (Linux) to my client PC windows XP.
Then I open the report and compile at test run. I did not do any revision yet, but just compile it at the client side.
But I got error:
REP-1212: Object 'Body' is not fully enclosed by its enclosing object".How strange this report happening can be.
I remember customizing report it R12 using 10g reports but they are not behaving like this. Can I compile my report using 10g instead? for Oracle Apps 11i?
Please help....
Thanks

Hi,
I remember customizing report it R12 using 10g reports but they are not behaving like this. Can I compile my report using 10g instead? for Oracle Apps 11i? You should not do as Developer 10g is not certified with Oracle Apps 11i.
For the REP-1212 error, please see (Note: 297522.1 - How to investigate printing issues and work towards its resolution ?).
Regards,
Hussein

Need to apply Batch split for deliveries.Please suggest

I had tried to apply batch split for delivery using the function module 'BAPI_OUTB_DELIVERY_CHANGE'.After running the program i get a message saying 'Batch split is done for a decentralised system - WMS' and the delivery can be seen only in display mode where the change is disabled.
Please suggest solution to apply batch split and view it normally.
Points will be awarded for helpful answers
Edited by: venkata on Apr 10, 2008 10:52 AM

thanks

Time Capsule is connected wirelessly and I need to use ethernet ports for other devices.

I have a 1st Gen Time capsule 802.11n and an Airport Extreem round hockey puck style. My airport utillity program is version 6.2 My OS is 10.7.5 My internet is from a verizon hot spot Jetpak. All my devices, laptop, desk top, printer, and time machine are running off this jetpak.
How can I use the ethernet ports on the back of my time capsule for a device that I had pluged in to my airport extreem? Before I had verizon, I had hughes net for my internet provider. My time capsule was the main unit in a WDS network with the airport extreem. I no longer have Hughes Net and I need to run this item that was pluged into the airport extreem ethernet port.
Of course with the newer airport utillity software (6.2) I can not control the older airport extreem anymore. This does not help my situation

You need to load the older utility.. 5.6 is still available for lion.
http://support.apple.com/kb/DL1482
WDS is hidden option so hold down the option key..
But I would search around for a cheap airport extreme N square type.. doesn't matter how old and you can pick up the older ones for $50 or so easily.. Then you use wireless extend which works much better than WDS. Using WDS you are killing wireless speed for everything.

Need to apply MTD logic for actual and prior year

Hi Team,
We are facing an issue with MTD calculation based on formula variables,
Issue: MTD Only (Actual and Prior Year) – show the same value for MTD.
Requirement:
When the query is run for a selected month, the query should be run for that month based on the Last TECO Date (Input Variable).
• For example, dashboard is run for January 2014, the calculation of MTD should be based on the Last TECO Date : i.,e if I enter older date/month (not current date)[ 1/20/2014 means it should calculate for 1/1/2014 – 1/31/2014]
• If the dashboard is run for the current month, the MTD calculation should be on Last TECO Date = 1st day of month – Current Day
The above same calculation logic should be applicable for MTD prior year: instead of the input variable value, the value for previous year should be considered
Final Calculation:
If Last Labour Date is blank, 0, else Last TECO Date – Last Labour Date (by individual line item)
Here we created two formula variables for last teco date and last labour date.
Also created 2 Customer Exit variable for MTD Actual calculation.
We have pulled the formula variable and CE variable into the selection and created a new CKF (Teco date).
We have done the final calculation on the basis of the ( (labour date ==0)*0 + last teco date-last labour date )for MTD ACTUAL.
MTD Prior Year-
when have done calculation on the basis of the( (labour date ==0)*0 + last teco date-last labour date )for MTD Prior year by giving offset -12 to the value.
Here for MTD Actual and MTD Prior year values are coming same ,we tried with by doing customer exit variables as well, Still values are coming same.
please give your valuable inputs/suggestions to proceed for this requirement .

I assume the Sales measure is a monthly measure. The Prior year calculation as I described will give you the sales for the same month in the previous year when selecting month in your report. When selecting year it will add up all months of the prior year until now and you will indeed see the Prior year YTD.
If you want to see the total sales for the previous year you have to use the same calculation as 'Prior year' and map it to the year level of your time dimension. This will work as a 'partition by year'.

Port already in use Error right after applying Patch 1 for Coherence 3.6

I'm having an issue with Patch1 of Coherence 3.6. I am not able to start two DefaultCacheServer instances. Its giving me the following error when I try load the 2nd one.
=**2010-08-17 15:56:21,550-Logger@9247854 3.6.0.1 ERROR Coherence- 2010-08-17 15:56:21.550/2.156 Oracle Coherence GE 3.6.0.1 <Error> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor:TcpProcessor, member=2): error binding ServerSocket to 172.16.173.164:9095: java.net.BindException: Address already in use: bind
     at sun.nio.ch.Net.bind(Native Method)
     at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
     at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.acceptor.TcpAcceptor.configureSocket(TcpAcceptor.CDB:25)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.acceptor.TcpAcceptor$TcpProcessor.onEnter(TcpAcceptor.CDB:26)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
     at java.lang.Thread.run(Thread.java:619)
It looks to me something to do with ExtendTcpProxyService. I have that hardcoded to go to 9095.
Do you have any work around for this issue?

I am seeing a similar problem (not sure if 3.6.01 related since I have only tried with this release yet - I always run on the bleeding edge on my dev machine).
If I do NOT specify tangosol.coherence.localport explicitly I get a message that 8088 is in use. If I understand things right should not Coherent try to increment the port number (I have even tried seting tangosol.coherence.localport.adjust to true explicitly) but this does not seem to happen.
It gets even stranger since when I run the Windows command that checks for open ports 8088 is not listed as in use....
The same thing happen if I specify 8088 explicitly (still no auto increment).
If I however explicitly specify another free port (say 8089) it works...
Really strange...
/Magnus

Second iPod down the pan! Any patches available for other mp3 players?

Hi
My second iPod has now crashed a week after the warrenty ran out! My last iPod did this so I gave in and bought a new one but the second one has done it. I have tried absolutely everything to restore/update etc. to no avail. Everytime I connect it to my computer now everything freezes or my computer does not recognise it. The iPod also skips every song when playing and then I get the folder with exclamation mark. So... I'm not buying another one but can anyone give me a patch so I can play my songs on another player. Please, I'm desperate!!!!!

You can drag the files from The iTunes window to the Zen on the desktop.
It won’t play any DRM songs from iTunes.
It should play regular AAC songs thoug.

Apply patch for oracle10g on window

Hi Experts,
I am new person.
I try to apply patch 1024 for oracle 10G R1 at 32 bit window.
Patch 1024 Installation Instructions for Single Instance
Follow these steps:
1.
Cleanly shut down all processes running from the ORACLE_HOME.
2.
Set the ORACLE_HOME environment variable to the correct Oracle home that needs to be patched.
> set ORACLE_HOME=<Oracle Home Path>
3.
Go to the directory where you downloaded the patch:
> cd 7584866
4.
Ensure that the directory containing the OPatch script appears in your PATH setting. Enter the following command to run OPatch:
> opatch apply
My steps shows as
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\jzhu>cd \
C:\>echo oracle_home
oracle_home
C:\>set oracle_home=C:\oracle\product\10.2.0
C:\>echo $oracle_home
$oracle_home
C:\>
I download patch at C:\patch\7584866
then go to DOS
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>cd C:\patch\7584866
C:\patch\7584866>
C:\patch\7584866>opatch apply
'opatch' is not recognized as an internal or external command,
operable program or batch file.
I got a above error.
however, i check my system that opatch patch as C:\oracle\product\10.2.0\db_1\BIN\OPatch
if i go to this patch
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\jzhu>cd \
C:\>echo oracle_home
oracle_home
C:\>set oracle_home=C:\oracle\product\10.2.0
C:\>echo $oracle_home
$oracle_home
C:\>cd C:\oracle\product\10.2.0\db_1\BIN\OPatch
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch apply
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>
I got another error as OPatch failed with error code = 1.
I also found the inventory patch as C:\Program Files\Oracle\Inventory
What wrong?
Could help me to apply patch in detail? It is my first time for thsi point.
Thanks
JIm

Hi Expert,
I saw a opatch bat file in directory(C:\oracle\product\10.2.0\db_1\BIN\OPatch>)
However, I got an error when i run opatch.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>
What is wrong? I set oracle home =C:\oracle\product\10.2.0\db_1
Which Java version do i need to install based on message --Java could not be located. ?
Please help me.
Thanks
Jim
Edited by: user589812 on Feb 24, 2009 8:48 AM

HT4914 once subscribed, does the main computer with library always need to be on in order for other devices to work?

I am trying to figure out if iMatch is right for my family. We have 2 iPhones, 2 iPads, an iPod Touch, and a few PCs. One PC has our music library on it in iTunes. We want to all share from the library with our own separate devices. If we subscribe to iMatch, does everyone need to use the same ID to access the library? Does the main PC with library need to remain on constantly for other devices to gain access? And my daughter has the iPod and we would like to control the content she is able to access, is this possible with iMatch? Thanks

You will all need to use the same id that you subscribe to iTunes Match with (that will need to be the account that is signed into on the devices/computers that you want to access the music from), but your computer doesn't need to remain on - when you subscribe your library is uploaded from that computer to the cloud, so it only needs to be 'on' then, when it's finished uploading it will be accessible from the cloud on your devices/computers via your internet connection.
Using iTunes Match on iOS devices : http://support.apple.com/kb/HT5637

Need to apply PATCH&HF for other nodes??

Similar Messages

Maybe you are looking for