Need to block vendor stock, type O.  I need mvmt 342 or 344?

Hello,
   I'm attempting to block stock provided to a vendor (type O) so that MRP doesn't consider it usable, until we decide what to do with it.  Unfortunately, SAP doesn't allow movement 344 to be used with type O stock, and movement 342, which should work, won't show up in MIGO or MIGO_TR.
   I have not been able to change configuration for movement 342 to make it show up in MIGO, and I have not been able to add stock type O to the allowed stock types for movement 344.
   Is there another way to block this stock type, and if not, which configuration should I modify, and how can I find the transactions to configure this?
Thanks,
Randy

If this is subcontracted stock at the vendor then I do not believe it is possible to block this . Check a thread in this forum from Aug 22nd concerning the same- block sub contracted stock.The only other way to block this stock is to bring it back in house.

Similar Messages

  • GL account needs to block for local currency & another cur. needs to post

    Hi,
    I need GL account that should block for posting in local currency, it should post other(forgien) currencies. how can i handle this scnerio.
    if there is any balance,is it possiable to maintain validation.could you please let me know,how i can resolve this problem.
    Thanks in advance
    Jaya

    Hi,
    Though a document is created in foreign currency, system will also update the amount in local currency based on the conversion rate given in the document or maintained in OB08 table.
    If your requirement is to allow only foreign currency transaction for a GL account, then write validation with the condition that - If GL account no is XXXXX, check document currency is not equal to local currency (BKPF-WAERS).
    Regards,
    Rengaraj

  • Change stock type

    How do you change a stock type within a purchase order?  Right now I need to change a stock type from a 1 (warehouse) to a 4 (blocked).  Where on a purchase order would I change this?

    Hi,
    You can change the stock type in PO under "Delivery Tab" in Item Details block.
    Hope this helps you.
    Regards,
    Nikita

  • Badi for changing Stock type in MIGO transaction

    Hello ALL,
    IS there any BADI or EXIT for changing stock type in MIGO when we are doing GR against PO then we need to change the Stock type  to Unrestricted stock.
    Please let me know.Awarded if useful.
    Regards

    hi,
    Look into the BADI     MB_MIGO_BADI.
    or
    Exits:
    MBCF0009 Filling the storage location field
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0011 Read from RESB and RKPF for print list in MB26
    Sirish

  • How to know which stock type updated within movement type

    Expert,
    I need to know which stock type updated within each movement type.
    I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
    I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
    And then i'm facing this :
    Ilustration :
    MIGO transaction - Goods Receipt PO - Stock Type Unrest
    in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
    MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
    in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
    MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
    in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
    in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
    I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
    How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
    I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
    Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
    Thank you so much.

    The stock type indicator doesn't update for the movement type 322 in table MSEG.
    At the time of transferring, you do not have to enter the stock type for movement type 322.
    I can give you one clue, check can it fulfill your requirement.
    You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
    You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock.

  • Change field Stock Type in transaction MIGO

    HI Gurus
    My user wants to change the field Stock Type in good receipt after that good receipt has been created .
    Is there a way to change this field ? Using transaction  MIGO  can only display the good receipt .
    Thanks in advance

    Once GR has been done you can not change the stock type in display.
    Using MIGO at the time of goods receipt you can change the stock Type. Once you have posted to a wrong stock type then you need to do the transfer posting from stock type to stock type.
    Explain your requirment?
    Check [Stock types|http://help.sap.com/saphelp_46c/helpdata/en/a5/63393f43a211d189410000e829fbbd/content.htm]

  • Exclude Reservation stock type from MRP Run

    Dear All,
    I need to exclude Reserved Stock Type from MRP Planning.
    Please guide me with the steps to perform the above.
    Just for your information, the reservation is coming from Plant Maintenance module, not Production Planning.
    I tried changing the Availability check 02 - PM checking rule to exclude reservation, but it doesnt seem to work. Maybe i did it wrong.
    Please help.

    Nazrin,
    Availability check configuration (OVZ9) has no impact on MRP.  MRP relies on its internal rules when it is performing its net requirements calculation.  You have very little control over which elements are included/excluded.
    You can exclude selected storage locations from MRP planning.  Stock and reservations against these storage locations will therefore also be excluded. 
    You can exclude a material from planning, change the material master MRP type to ND.
    Your best bet, though, would be to set your PM planning process up such that these materials never create the reservation in the first place.
    Regards,
    DB49

  • How to block vendor invoices when GR is made to stock type 2?

    Hi,
    I would like to get your advices on the following case:
    - I need to be able to block vendor EDI invoices from payment when GR is made with 101 to stock type "2", Quality inspection. Manual blocking is not the case here but SAP should block invoices automatically in these cases. Is there any user exit available for this? Invoice blocking should be made also in the case when initial GR is made with 107 (in this case invoice is blocked by standard) and material is then released from valuated GR blocked stock with 109 to stock type "2", Quality inspection. In standard system vendor invoice is now unblocked but my customer needs to have an invoice still blocked as material is in quality inspection stock type.
    Please advice.
    Br,
    Tapio

    Hi,
    Refer this post
    http://forums.sdn.sap.com/thread.jspa?threadID=1488428
    You will get the idea

  • How to transfer special stock type ''O'' from unrestricted into blocked

    Hello!
    I would like to finD out if there is any movement type which would move sprecial stock ''O'' (provided for Vendor) from unrestricted to blocked? The stock should still belong to vendor afterthat.
    We want to move the quantity of some batches into ststus blocked as we do not want them to be used (bad quality) - the are physicaly at vendor. We move this unavailable materials from vendor to our plant every 2-3 months and would need to have accurate information about unrestricted stock.
    Many thanks in advance for your answer.

    Hi ,
    For the stock of material provided to vendors, the available stock types are unrestricted-use stock and stock in quality inspection. So you can NOT change the stock type to blocked.
    I suggest you create a special storage location for this purpose.
    Best regards,
    CM

  • Return to vendor from Blocked Project stock - Line rejection

    hi
    I have a problem in doing line rejection for return delivery from a blocked project stock.
    we had modified F5 notification for Project related senario to FQ and using the same for doing line rejection return delivery directly from project stock with the help of action box.
    While the include is accessing MSPR table for picking up the project stock.
    the steps involved are as below.
    1. create FQ notification (Similar to F5) by giving inputs as Material to be rejected,Plant, Defect code from existing code group and assign the purchase order.
    2. Tranfer the project stock to blocked projection stock ie.rejection stores using 344 movement type. while doing this 344 we give input of WBS element, storage location and Batch.Stocks against this WBS are picked from MSPR table and trasnferd to rejection stores.
    3.After this while doing return to vendor we give the reason code and post 122 document.
    the problem is if the material is having two WBS elements it and both have stock in rejection stores this follow up action is unable to pick the Exact stock for which the WBS element is assigned to notification while 344 movement.
    please suggest me as how the WBS element can be retrived from a notification which was used for earlier actions in action BOX.
    regards
    NVB

    Hi
    If u want to return the material to the vendor. In MIGO itself select return delivery against the material document with movement type 122 u can send it.
    This is irrespective of material lying in quality or blocked. From quality or from blocked status u can send the material back to vendor.
    No need for quality to Un restricted or Blocked to Un restricted.
    Regards,
    Raman

  • Block Vendor invoice for quality inspection stock

    hi,
    I have done MIGO & manually change stock type from unrestricted to quality inspection & posted the document. Now i want vendor invoice should automatically block when doing the MIRO, but it is not happening. How to do this?
    Thank's & Regard's
    Parag lute

    Dear Parag,
    Now that you have manually changed the stock type unrestristed to Quality inspection, the option you can use is go to stock overview Tcode:MMBE and psot the stock from quality to block stock. This is completely mannual process.
    If you prefer system to do it automatically, then activate quality inspection setup in MM02, quality view -> inspection setup (inspection type - 01, 04, 08) and also maintain Qinfo Tcode: Qi01 for the assigned material.
    Regards,
    Prashanth Pai
    "Award, if usefull"

  • Prevent Third Party / Sales order stock for blocked vendors

    Hi Experts.
    We have scenarios for Third party processing and Sales order stock. We have a scenario of a fixed vendor for a material. The purchasing function frequently does block vendors for purchasing.
    However, we find that this does not prevent creation of a third party / sales order stock item in the sales order and a PR is generated. It is only found during the PR --> PO conversion that the vendor is blocked at which time someone has to manually reject the line items.
    Is there a way to prevent the system from being able to generate a PR for a blocked vendor ? I guess one possibility is to enhance the requirement routine for PR creation. Is there any other approach ?
    Appreciate your help
    Regards
    Rohit Zalani

    Hi
    In MK05, block vendor for all Purchasing org and Select Block Function = 03     Block quot. req., order, goods receipt
    If you do this setting then user will get error message that "Vendor is blocked" and "Purchase requisition could not be generated for component".

  • Need a way to automatically block HU stock when moved to damage bin.

    I am looking for a way to automatically block stock when it is moved to certain bins.  For example, when a handling unit is moved to a Damage bin (storage type 306), I would like movement type 344 to be executed to automatically hide the stock from ATP.  I know that bins can be blocked from stock placement and removal but that is not what I am looking for.  I do not want the stock available for sale.
    One solution would be to modify our custom RF program to do a movement 344 following the movement 999 (bin to bin transfer) whenever an HU is moved into bins of a certain storage type.  However, I am looking for a pure configuration approach or any other ideas.
    Thanks in advance.
    -Rob

    A similar requirement is being discussed in the following thread. Check my response over and see if it helps.
    ATP check at delivery level is taking into account stock in S type 999
    Thanks
    Swagat

  • Transfer of stock from Returns stock type to Unrestricted/Blocked

    Hi,Friends
    How to transfer of stock from Returns stock type to Unrestricted/Blocked
    what movement type will trigger by transfering this stock,
    Thanks & Regards
    Krishna

    Hi,
    use MB1B Mvt Type 453 returns to unrestricted
    Unrestriced to Blocked stock use - 344
    Thanks & Regards,
    kiran

  • Block upon stock removal indicator in Storage type master data

    What is the significance of "Block upon stock removal" in storage type master data. Would it work if the storage type is bulk storage and SUT active?

    The config setting with indicator 1 will stop you from creating  more TOs for a bin in st type 425 if there are already open picking TO for that bin. In other words lets say you have a stock of  material  u201C79010460u201D in st type 425 u2013 B20B bin and you have created a picking TO from this bin unless you confirm this TO no more picking/stock removal TOs will be allowed and the bin will be blocked. You can see that block on bin in LS06 transaction. Once the TO is confirmed the block will be lifted automatically from the bin to create new Picking TOs.

Maybe you are looking for