Need to buy Satellite X200/X205 harman-kardon speakers

Anyone knows where i can find to buy the TOSHIBA X200 or X205 harman-kardon speakers (left+right+subwoofer)?
And the black cover too... (without the 7 butons board)
Please, help

Hi
All the compatible notebook parts can be purchased from the ASP in your country. I would recommend to contact the guys and to ask for such speakers.
The Toshiba global ASP database can be found here;
http://eu.computers.toshiba-europe.com/ -> Support & Download -> Find an Authorized Service Provider
Bye

Similar Messages

Harman-kardon speakers

Is it possible to use my harman-kardon speakers with my new HP monitor? The speakers do not have USB connectors,and, i cannot plug them into the tower. (They plugged into previous monitor.) Is there some sort of adapter I can purchase? Simplistic question, but major headache.

While it may not be all that helpful, I had some issues with an Altec lansing speaker set on my G5, where background noise was abnormally high almost all the time, and from time to time there would be rushing noises which grew very loud. It turned out to be a faulty USB hub, even though the speakers were not USB connected.
To troubleshoot your system, I would disconnect everything external bar the basic essentials, including any hubs or other devices, even the keyboard and mouse, and test the system that way. It would not be expected for software or MacOS itself to cause the sort of effects you describe.

HP f1703 Monitor and Harman/Kardon Speakers

I have an HP f1703 monitor that is about nine years old. It is different from the image on the HP support site for this model number -- mine does not have integrated speakers. It came bundled with a pair of Harman/Kardon speakers that draw power from the monitor itself (no separate power supply).
A couple of days ago, while using my XP machine, the monitor suddenly began blinking between a black screen and the desktop. It's a steady blink. It continues to do this when the VGA cord is not attached and when hooked up to a second desktop. I used a spare power cable of the same rating and it contines to blink. It seems safe to state the monitor is a goner. If there are any simple troubleshooting tips, I'd greatly appreciate them.
But my main question is this: Since the speakers did not come with a separate power supply, is it safe to use the monitor's power supply with them? The jack fits perfectly and when plugged in an outlet, there is no intererence, crackling or anything. I don't want to fry my soundcard or motherboard.
The model number on the speakers is HP 5187-2105. The power rating is DC 12V 1A.
Any help and/or advice is greatly appreciated. Thank you.
This question was solved.
View Solution.

Hello FireDragon,
This is an interesting case. I have found the speakers online through Amazon so they are sold separately without the monitor and it comes with a power supply. What I can't find is the wattage the power supply is.
With that being said I can't say for 100% certainty that the power supply can be used, I believe that you should not have any issues though.
I would also say that (and this is probably not the answer you want to hear) speakers can be relatively cheap and you may be better off just purchasing a new set of speakers.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Harman-kardon speakers and various loud noises( mac mini)

My Harman-Kardon ball speakers, which have served me well from my old Cube days, are going loopy.
They have been happily USB connected to my 17" studio display (and powered from it) Recently, I've been hearing clicking noises, which can turn to a very loud 'rushing' sound if the computer has been active for more than an hour. I know some have had software issues with their sound systems due to 10.4 updates, but none reported very loud sounds. I came home yesterday to what sounded like an apartment fire alarm, it was that loud, but it was only my 'sleeping' computer. The noise ended when I pulled out the USB.
Could it be software? I don't want to buy new speakers if it might be. Or, time for knew speakers?-- if so, any advice? Happy New Year. Kevin

While it may not be all that helpful, I had some issues with an Altec lansing speaker set on my G5, where background noise was abnormally high almost all the time, and from time to time there would be rushing noises which grew very loud. It turned out to be a faulty USB hub, even though the speakers were not USB connected.
To troubleshoot your system, I would disconnect everything external bar the basic essentials, including any hubs or other devices, even the keyboard and mouse, and test the system that way. It would not be expected for software or MacOS itself to cause the sort of effects you describe.

M30 Harman Kardon speakers anoying sqeaking feedback sound

After installing the HP Tele in a box software I found that my speakers began to squeal similar to feedback. I have attempted to re install the drivers but the niose is still anoying me. I have unistaled the tv in a box and taken it back to the shop after it stopped responding shortly after purchase. Can anyone assist me with this anoying sound?

Hi
check in the mixer settings (in the Control Panel > Sound & Audio devices > Device Volume > Advanced > [New Window] Volume Control) that the output channel MIC is muted. That should stop the feedback.
BR
Tom

Harman Kardon avr 1700

Hi,
I noticed Best Buy is selling the Harman Kardon avr 1700 for $250. I am hesitant to buy because I noticed it has a different type of amplifier/power supply, type D I think. The receiver weights 12.8 lbs vs 18lbs.
Has anyone listened to the Harman Kardon 1700 in Best Buy stores. I am curious of the sound quality. There are no reviews of the sound quality besides Best Buy reviews on the product page.
Best Buy black friday ads show that the Denon AVR 1613 will be on sale for $275. I was curious how the HK 1700 would sound compared to the Denon 1613. If the Denon sounds alot better I would wait and buy it online from BB on black friday. the specs show that the Denon 1613 and HK 1700 have comparable features for the most part.
I bought JBL CS 480 surround sound system and need a good receiver to power it. Will accept other suggestions too.
thanks,
Mike

SlimJim77 wrote:
rwillen wrote:
SlimJim77 wrote:
I was skeptical too, but these modern class D amps are really starting to impress me.
I'm fan if the line level Denon units out.
Real audiophiles test amps without all the effect processing.
Real audiophiles aren't buying $300.00 AVR's.
The Audessy MultiEQ is still the better of the pinking technologies.
So you have to be rich to be an audiophile? Thanks for the 411, but I do not subscribe to your aristocratic values, sir.
I said nothing of the sort. I simply stated that audiophiles don't buy $300.00 AVR's. Most of them most likely aren't buying their gear at Best Buy either, at least not outside of the Magnolia section. Most audiophiles are still buying seperates rather than an AVR because let's face it, for music, which is what most audiophiles really care about, $300.00 AVR's simply aren't that great.
However, $300.00 AVR's can be great for multichannel. The basic internals like the DSP are the same across most model lines on most companies AVR's. The differences in price comes solely from things like the number and types of connections, network or serial connectivity, and the software features in the AVR. Most AVR's under $300.00 don't come with helpful features like Pinking Tools (Audyssey MutliEQ, EzSet) or volume balancing and loudness adjustment features like Audyssey Dynamic EQ and Volume.
For that price getting MultiEQ, Audyssey Dynamic EQ and Volume the Denon is a great bargain for anyone that's looking for an entry level AVR.

Problem Faint sound x205-SLi1 (every x205) on windows 7. harman/kardon 4.1 (drivers)

I have a problem with sound in my x205-sli1 but the same (harman kardon speaker 4.1) are in evry x205 model. I had a win XP and sound was pure and spacious. After format I instaled windows 7 i instaled new Realtek Audio Drivers for WIndows 7 and sound isnt as good as it was. I seems that work only 2 bigest sperakers. Suboofer and Two other smal speaker seems not working.
i am not alone becasuse a fount this post :"
Last night I finished my upgrade to Windows 7, Ran the Official "Toshiba Software Installer for WIndows 7" and was initially pleased to see that nearly all my original Laptop funcaionality, from my Card Reader, to my Fingerprint scanner worked without an issue.
This joy though was soon crushed the momment I went on youtube, and experianced my computers "New" audio fidelity.
My Laptop came with built in Harman Kardon 4.1 speakers, and I have always been complimented by friends at how rich my sound quality was compared to other laptops they had seen.
Now it seems that the currently most updated Realtek Audio Drivers for WIndows 7 (And for that matter Vista and XP aswell, I've tried everything) do not seem to be able to do more than just basic stero sound.
Both my surround speakers and my Subwoofer seem to be completly ignored, and my computer now has a tinny sound to it that is rather offputting when compaired to it's previous preformance."
PEOPLE PLEASE HELP BECAUSE I HAVE NO IDEA HOW TO FIX THIS.

I have the x205 S9810 and have noticed the same thing, Had Vista Prior with High Quality sound and then updated to Windows 7 with only Stereo. I have tried the Realtec drivers and the Toshiba Drivers and there is no diference really. I do know that the Microsoft driver does not work with the built in mic at all. My Subwoofer and surrounds are not puting out any sound and in the speaker settings there is not any setting for adding the surrounds like there was in Vista. I hope someone at Toshiba can let us know what is being done about this issue soon.
Attachments:
DxDiag.txt ‏37 KB

TS3623 Apple TV works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite receiver work fine both ways

Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.

Does it help if you set the output to 720p.

Need Windows 7 64-bit drivers for Satellite X200-21P

Hello everybody,
Hope someone could help me with my query.
Recently I have made a clean installation with Windows 7 64-bit and now I am having drivers problems. Except for nvidia driver which I have downloaded from their website, I could not find any other drivers and not even able to use the drivers that are in toshiba website.
My notebook is Satellite X200-21P.
Any suggestion or direction would be appreciated! Thank you very much!
Kind Regards
Suraj

For me is logic to check support at fist and then make decision which OS should be installed.
Fact is that your notebook model is not supported for Win7.
For me there are two options only:
-try to use Vista 64bit stuff
-check if some other notebook model with similar hardware is Win7 supported and try to use these drivers.
Sorry but I dont see any other solution for you.

Satellite X200-23G - Need some drivers for Windows 7

Hello buddy !!
In first place, I'm Brazilian and I have some dificulties to speak in engilsh.
Let's to go to the problem:
I had been installed Windows 7 Ultimate here in my Satellite X200-23g (PSPBUE), but, I'm not find some drivers. Are the drivers: Video Card, Biometric Coprocessor, PCI Memory and Storage Massive.
I hope that can someone helps me.
For now, thanks for everyone !!!

Hi buddy,
All drivers can be downloaded on the Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
I have checked the page and it seems that for Windows 7 are no drivers available. I think its why Satellite X200 is pretty old.
But from my own experience I can say that the most Vista drivers are also work on Windows 7. You should check this too! ;)

Harman Kardon SoundSticks II with iPad?

Dear all,
did someone try the Harman Kardon SoundSticks II together with the iPAD?
Apparently there is no sound control on the Harman Kardon SoundSticks II.
The price and the sound is good on the Harman Kardon SoundSticks II, but would you recommend it together with the iPad for the living room? I am not looking for a very very expensive high end music equipment, therefore my question. Is it feasable to use the Harman Kardon SoundSticks II and the iPad?
Regards
Sam

You can use the dock if you want to use the line out (which has a volume tap) from the dock connector to your soundsticks. Otherwise you can just use a M/M miniplug cable and go from the headphone port on the iPad into the soundsticks. You'll also need this cable to use with the iPad dock.
http://www.radioshack.com/product/index.jsp?productId=4344797
The Soundsticks do not have Bluetooth or WiFi so you cannot connect in that manner. You can wait for iOS 4.2 in November, buy one of these: http://store.apple.com/us/product/FB321LL/A?mco=MTA4MjcyODY and the above cable and connect wirelessly via AirPlay.

Does Satellite X200 support surround sound like 5.1

Does my x200 20T have surround sound like 5.1 ?

You are right, it supports 2x main + 2x tweeter and 1x harman kardon subwoofer.
So it can create a kind of surround. But can I connect the laptop to a amplifier to use the real suround speakers in the living room ?
I can buy this headset with inbuilt surround speakers. The connections for the headset is USB. The real questions is: Do I get surround like 5.1 through the USB connection ?

Connecting Nano to Harman Kardon amp

Dear audiophiles,
I just purchased a new Harman Kardon stereo receiver HK 3385. It is designed to use with an iPod and comes with the audio/composite-video cable to connect the two devises. Upon connecting it up I discovered that the volume needs to be all the way up on the Nano to have normal volume come out of the stereo speakers.
This receiver is rated 80 watts x 2 driven at full power at 8 ohms
The speakers are Onkyo HS-15 from 1980's 45 watt max, 20 watt rated each speeker; 8 ohms.
I use them in my work shop.
Q 1. is it normal to turn the Nano all the way up when connecting to a stereo then control volume with the amp's volume control?
Q 2. does this hurt the Nano/drain the battery too fast?
Yes I will get a powered doc when I figure out what I am doing here and look into what is available.
Q 3. any recommendations on an ac powered doc?

Hope it is ok that I move this up to current viewers. My questions and the answers to them should be interesting to others as well.
I have pursued the powered dock and people seem unhappy with what is available to buy right now.
A retired electrical engineer came into our store the other day and I asked him. He said the out put voltage was on the order of one volt peak to peak for what that is worth.
He said he thought that running it at full "volume" setting would be a bad idea without a powered dock.
He had no experience with a Nano however.
I have since cut back a bit on the setting but it must still be near full blue bar to get much punch out of the system.
He said he thought the dock would help significantly with the volume problem.
The whole reason I bought the nano is to take music to my work shop so I don't have to have a computer in that dusty environment. I won't be using the nano for much else. So please forgive my persistence here. I don't want to ruin a new Nano battery in a few uses.
Is this truly hard on the battery?
Will the dock help improve volume?
Which one is good?
Barking in the night.

Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

_*Satellite x200-191*_
Core2 Duo T7700
*Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
*Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
17 WSXGA+ TRUBRITE TFT Screen
HD DVD-ROM Drive
56K Modem / Lan
W-Lan (802.11 A/G/N)
1/3MPixel Web Camera
Bluetooth
Microsoft Vista Home Premium 32 Bit
_*My Problem:*_
I take out the battery, plug it in the power. Charging light turns on.
I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
+So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
_*Fixing?:*_
Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
_+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
_+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
Finding no lose plugs, but did find a certein oil, and some white paste.
Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
*SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
What could be wrong, more precisly. Should I like try taking out the video card or something ?
Is there something I should do with some soldering?
Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
BEST REGARDS
Danny Visser
The Netherlands
_*History:*_
Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
After not using it for school anymore I reinstalled Windows Vista 32 BIT
At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
+(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
Considering the toshiba help I have gotten ... (pretty much none) in these last years.
I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
Thx tho all you guys for the replys.
Danny Visser

WLAN has stopped working - Satellite X200/N00, Vista 32-bit Ultimate (SP1)

When I purchased this laptop earlier this year, everything worked pretty well with no significant issues. A few weeks ago, however, my WLAN connection stopped working -- specifically, it does not get a valid IP address from the router.
Notebook is a Satellite X200/N00 (PSPBUA). OS is 32-bit Vista Ultimate (SP1).
It was working fine right up to the point where it stopped working. The router itself still works fine -- I have used the wireless connection with a completely different laptop since having the problem on the Toshiba.
This seems to be a fairly common Vista issue, but so far everything I've tried has failed to get me anywhere.
The router is a D-Link DSL-G604T. I have updated it to the latest version of firmware, but this has not made any difference.
In Vista I have disabled IP v6.
I have installed the latest version of the Intel wireless driver (v12.1.2.1). The hardware passes all self-tests, the only thing that fails is obtaining the IP address.
I don't know why the wireless connection just stopped working -- as best as I can recall, I had not installed any new software or updates just prior to it stopping working. It doesn't seem to be a hardware fault.
One thing I have not yet done is test the connection with a completely different wireless router (e.g., at a public access point).
That may be instructive, but not really useful, since I need to get it working with the router I have!
Any thoughts?

Hi
There are many different reasons why the IP address cannot be obtained.
In first case you should check if your firewall is disabled or doesnt prevent the IP address from receiving.
Secondly you should check if the TCP/IP protocol was set to automatic
You can find such settings in TCP\IP protocol properties.
Last but not least I would recommend disabling all security settings on the router and trying to establish the WLan connection.
Please check if the Mac address filtering was disabled, disable the WLan encryption, and check if the right SSID is in use.
If it will be possible to establish the Wlan connection then you could enable step by step the single WLan security settings on the router.
Bye

Need to buy Satellite X200/X205 harman-kardon speakers

Similar Messages

Maybe you are looking for