Need to buy U350 keyboard module

I'm in Vietnam , and My U350's keyboard is dead ." It's can't be repaired " <- FPT Computer Service Center (Lenovo authorized warranty service center ) said.
Now i need to buy keyboard module to replace. But i don't know how to get it ?
Please help me !!!!

you can use external keyboard until you're back to US.
to buy new one, you need to learn model and p/n number ( there's a sticker under the keyboard - for example -)
but after that process your warranty may not be valid anymore. ( you can ask lenovo support line to learn that )
and more, can you find it ( to buy )?
check this out : http://www5.pc.ibm.com/europe/products.nsf/options+page?openagent&brand=all&category=keyboards+mice

Similar Messages

Do I need to buy Labview RT module to use CRIO?

I got very confused with too many LABVIEW versions and modules. I have a Full Development LABVIEW. I purchased a CRIO 9073 that I would like to write code for. However, my first obsticle is with initial configuration inside of MAX. I formated the disk, but I can't upload software to it. I get conflicts and dependancies errors(such as missing RT SCAN engine and many more) that let me to believe that I am missing a Real-Time module. Sounds like I need to buy RT module separetely from Labview. What I would like to figure out is whether RT and FPGA modules come with Professional development system or I still need buy these two modules separetely. It sucks that I purchased CRIO9073, but apparently I don't have right software to use it.

These two forum posts say that you do need the RT module:
http://forums.ni.com/t5/LabVIEW/program-crio-without-fpga-or-RT/td-p/1136028
http://forums.ni.com/t5/Real-Time-Measurement-and/Using-cRIO-Fieldpoint-without-RT/td-p/1716982
There's a procedure for using a Fieldpoint RT controller without the RT module, you could see if the same thing will work for the cRIO (install RIO support instead of Fieldpoint support), but don't be too surprised/disappointed if it does not work.

What hardware i need to buy if i want to connect 8 analog lines

Hi, i need to connect in a branch office one router supporting :
8 analog lines
1 ethernet interface
1 serial interface
and support security issues.
what model in the 2600 family router i need to buy?
should i need to buy one network module NM-HDV2?
if i need to buy the NM-HDV2,may i connect two VIC2-4FXO?
Thanks

You would need
2611XM chassis
NM-HD-2V card
VIC2-4FXO
VIC2-4FXO
WIC-1T
Appropriate IOS with voice and security feature sets.
The NM-HDV2 card has digital ports and only one VIC slot, so would not handle 8 analogue lines.
Best option is to contact your local Cisco office and speak to the account team to confirm if this system is best suited to your requirements.

Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

Do I need to buy the Enterprise Suite or just Forms module?

Hello,
My company needs to use the funcionalities that Forms module gives, so we are planning to purchase it. But I'm not sure if it's possible to use its functionalities just having this module, or if we need to buy the Enterprise Suite because it includes the server and other things that are needed to deploy the applications.
Sorry for the newbie question guys. I'd very much appreciate some help.
Thanks in advance.

Thank you for the advice DadduPandeyLC. I contacted with LCsupport but they could not give me an answer.
The application is not complex, we have a pdf template and data in xml files and we have to merge them to generate the filled pdf files. The problem is that the number of files generated will be thousands, and I know LC Output is prepared to generate batches of many files but they are flat pdfs, not forms.
It doesnt have to be an online app, it will just be executed once to generate all the files. I know LC Forms can merge the data, because I tried it with the trial version, but I'm not sure if there is a way to automate this process for thousands of files.
That's basically why I doubt if we should use this module. Has anyone tried to do something similar with LC Forms?
Thanks

Buying a Keyboard/Piano This week NEED HELP ASAP

So I want to learn to play piano but I dont know if I should get the M-Audio KeyStudio 49. I would like to have a keyboard that I can play without having to hook it up to my computer but I also want something that is compatible with garage band. I also dont really think Ill be gigging with the keyboard, this is just for my own entertainment at home.
Are there any other keyboards you recommend that are stand alone and compatible with garage band within the same $100 price range?
Is the key studio a good buy?

if you want something that works as a standalone, you can't get a MIDI controller, which is what you have listed. you need to buy a synth, not a controller, if you want to use it with your computer.

Is the smart keyboard on the ipad2 enough for email purposes or do I need to buy an external keyboard?

Is the smart keyboard on the ipad2 sufficient for email purposes or do I need to buy an external keyboard? Also, does the ipad2 have dictation capability?

the iPad 2 does not have dictation, but there are apps out there for that. Dragon Dictation is one of the more popular ones.
As to the keyboard, it's a personal thing. SOme love it and never need an external one, others can't stand the on screen keyboard. Hand size, dexterity, etc, all come into play. (I got an external simply because it bugged me to have to toggle to another screen or hold down a key to get a ' )

ASAP - NEED TO BUY IN 1 HOUR SMALL PORTABLE KEYBOARD

Hi,
Any suggestions?
Finishing a small score - going to be on vacation to finish in next few days. Am near music store and need to buy in AN HOUR!
Anything I should consider? I am a pianist - many years of playing.
Thanks!

It can be really small - hopefully at least an octave and a half... am mainly using it to play in 'lines' and use it as a MIDI editor...

Do I need to buy an ethernet adapter or can I use one of my existing AEXPs?

My situation: Just ordered a MacPro which will be delivered Monday. In the mean time I need to find a WiFi solution. The Airport cards for this model are not available yet, and I need Internet access now. Obvious solution is an ethernet adapter.
My wireless setup: I have three AEXPs in my house. One is connected to my modem, the other two are set up as WDS.
Given this can I connect one of AEXPs set up as a WDS to my MacPro via ethernet to use as a bridge? If so, would it be plug n' play or would I need to reconfigure? (BTW my modem is nowhere near where the MP will be and can't be relocated due to the way Verizon rewired my DSL line and made one jack dedicated to DSL. So connection to the modem via wired router is not an option).
Or do I need to buy something like a Belkin wireless G router to set up as an ethernet bridge? I've found instructions on the web how to do this, but obviously I'd like to avoid spending money if I have equipment to do what I need to do already.
Any guidance appreciated.

Are you sure that you are going to be able to install
this later? It does not appear on the MacPro DIY page.
Duane is correct the Mac Pro wireless card is not a user-installable part.
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/MacPro0608/index.html
You CAN add Airport or BT after purchase, but it is not user upgradable. You have to have an Apple service provider do it.
AirPort Extreme
The Mac Pro computer has an optional, internal AirPort Extreme module connected to a dedicated 1-lane PCI Express bus. The AirPort Extreme module is available as a fully-integrated configure-to-order option or as an Apple Authorized Service Provider kit, which can be installed by an Apple retail store or an Apple Authorized Service Provider. For more information, see AirPort Developer Note.
Bluetooth 2.0 + EDR Module
The Mac Pro computer has an optional, internal Bluetooth 2.0 + EDR (enhanced data rate) module, with an antenna built into the enclosure. The Bluetooth module is connected via the internal USB 2.0 controller. The Bluetooth module is available as a fully-integrated configure-to-order option or as an Apple Authorized Service Provider kit, which can be installed by an Apple retail store or an Apple Authorized Service Provider. For more information, see Bluetooth Developer Note.
Personally I would get it added as a CTO (BTO) and wait rather than have the mess of an external device and the hassle of having to install a card at a later date.
iFelix

Do I need to buy PDA deployment licenses if I'm writing an application to a non PDA device?

Hi
I'm starting on a project that will be using a board running windows CE, I understand that I have to buy the PDA module so that I can write the application and then download it to the target using active Sync but I'm confused about the license issue. It isn't a PDA so will I need to buy a license for each board I download to?
Thanks
Karen

Would the license be per build then or device type build to be more exact? In my project we would be using the same build on a lobby display but there could be several displays on each floor of the building possible as many as 20 devices but all using the same code. We would have other devices using different code driving indicators etc but it would be fantastically expensive to charge each button with a license fee just to enable it to turn a light on and off. I may end up with 4 different builds being deployed on 4 different types of devices but there could be a total of 20 instances of each device.

Do we need a Library and Develop Module?

Do we really need a Library and Develop module? There's lots of dissatisfaction with Lightroom speed and one of the problem areas is when switching from Library, when in standard preview or 1:1, to Develop and the 'loading' message appears or as on my mac the dreaded spinning beach ball goes crazy. Even with all the previews created it's still slow.
So, if we have a standard preview or 1:1 loaded why can't we automatically be ready to apply any adjustments and save an extra step to another module? The quick develop in the library seems unnecessary and I've never used it. That leaves the metadata and keywording panels requiring a new location, but again these are not something I need to refer to on a regular basis.
Anyone else any similar thoughts?

> ...but I'm pretty darn sure there won't be any back-stepping to REMOVE or substantially alter LR's basic premise...pretty sure Develop will always be about dealing with a single image adjustment (and applying that adjustment to other images if you wish).
And I'm okay with this premise, but it needs additional functionality, such as the ability to apply relative adjustments. It already has this via the keyboard shortcuts while hovering. It just needs a UI adjustment (I once did a mockup of this, and I think it works) and the ability for autosync to recognize them as relative adjustments to the other images.
It also needs additional views. Grid, survey and compare would be nice, but you're only adjusting a single image's RAW data rendering at a time - the others are shown as previews and adjustments to them are rendered that way (like Library does).
The issue is, many people like me end up switching modules far too often. I generally go back and forth between Library and Develop hundreds of times per day. That's way too many times to be suffering the module-switching penalty. I'd prefer to select the images I'm working on in Library, and never see that module again until I'm done working on them. For now, grid and survey are too often needed, and so are relative adjustments.
Develop already has most of the needed functionality. Relative adjustments are already available to one image, a grid is available but only at 1 row (film strip supplied by Library) and a quick-render (the image in the upper left) is available as well. This just needs to be expanded and adjusted so that going back and forth to Library isn't as necessary as it is now. Ideally, you'd import in Library, to your metadata stuff there or in other related modules, choose the image group you want to work on using filters/folders/collections/find, then go to Develop and work on them until you are done.

Where to buy german keyboard in Beijing?

I'm the whole next time in China and I need a german wireless keyboard for my MacBook.
1. When I go to the Apple-Store, I get the answer they don't have it and I need to order over my german Online-Store.
2. When I like to order over my german Online-Store I only can deliver to Germany but I need it in Beijing (Peking/China)
Why it is so complicated? Now i pay a lot of money for the MacBook it's not possible to get a german wireless keyboard in Beijing ?!?
I need some resolution. Please help me !
Thank you

I would recommend it as it will work fine with the ipad without issues, and of course is wireless. Other brands of keyboards may or may not work, so for the extra money you might save, you may also have issues. Other options would also be to buy a case specifically for the ipad with a built in keyboard such as:
This one by Zagg http://www.zagg.com/accessories/zaggmate-ipad-case?gclid=CJbrvbqZuagCFRpVgwodcUH JBw
Or this one http://clamcase.com/bluetooth-ipad-keyboard-case.html
That would give you the keyboard and case together. If you go with the Apple keyboard, I was thinking of getting this case for it:
http://store.apple.com/us/product/H4760ZM/A

Qosmio X500 - Need to purchase new keyboard

Hi
can anyone tell me which particular exact Replacement Keyboard do I need for my Toshiba Laptop...?
It is a Backlit Keyboard UK & Black
* The Spacebar Key does NOT work and I need to buy a Replacement complete Keyboard to fix this problem
The Laptop Mode Number etc is as follows:->>>
Model Name QOSMIO X500
Part Number PQX33E-02X01UEN
Do you need the Serial No. as well..?
Please can anyone tellme as the more I look I find so many different keyboards that I am gettingconfused which is the RIGHT replacement KEYBOARD for my Laptop..?
Thanks
A

Hi
As far as I know the compatible keyboard has a part number: A000048040
But you can use any standard A4+10key flat half glossy black keyboard.
You can also contact (call) the Toshiba authorized service provider in your country to get (order) a new keyboard for this X500 Qosmio series.
The guys would be able to order such keyboard directly from Toshiba.

Midi and Audition CC? Does Au have a Midi option or do I need to buy a new program?

I have just bought a new Midi keyboard and was wondering whether it will work with Audition? Are there sounds in Audition or do I need to buy a new program?

The only version of Audition which ever had MIDI capability was AA3. The implementation there was somewhat "flaky" and all subsequent versions have not included it.
So the answer to your questions are, no, there are no "sounds" in Audition CC and yes, if you wish to use MIDI and virtual instruments extensively, another program is needed. Many of us run Reaper alongside Audition, using the former for MIDI, multitracking etc., and the later for mixing and mastering.

Where i can buy the keyboard for garage? and what other else has to buy to start my garageband?

Where i can buy the keyboard for garage? and what other else has to buy to start my garageband? I am a beginner for garageband. Thanks.

I second the M-Audio recommendation. I have the Oxygen 8 and 61es keyboards from them, and they both work flawlessly with Garageband.
what other else has to buy to start my garageband?
This depends on what you want to do with Garageband. Do you want to record with a keyboard only and just use Garageband's built-in software instruments? Do you want to record vocals? Do you want to record a guitar or bass or other instrument? Do you want to record drums?
Technically, you don't even need a keyboard to use Garageband, you could just use the software keyboard (Window -> Keyboard) or musical typing (Window-> Musical Typing). However, an external keyboard will give you a lot more flexibility. I don't recommend trying to record drums into Garageband unless you already know how to mic drums. Instead use the built-in drum kit software instruments with your keyboard.
Your iMac has a built-in mic, so you should be ok recording vocals with that.
If you want to record an acoustic guitar or another acoustic instrument, you can also use the built-in mic though you may find that you don't like the way it sounds very much since built-in mics tend to pick up lots of noise from the computer itself.
If you want to record an electric guitar or bass, you can just plug in the line out on your instrument to the line in port on your iMac, but you won't get really good results. You'd be better off geting a piece of hardware called an audio interface Sweetwater sells these too: http://www.sweetwater.com/shop/computer-audio/audio_interfaces/ (USB and Firewire interfaces are easiest to start with.) M-Audio also has some good cheap interfaces. I've used the FastTrack Pro for a few years now, and I started out with the FastTrack USB.
Ok, that's probably more than you wanted to know...happy Garageband-ing!

Need to buy U350 keyboard module

Similar Messages

Maybe you are looking for