Need to call transaction from report

Hi,
I have to create BAPIs to call from webDynpro to realize the functionality of the transactions MI01/MI04 and MI07. I´m working in the SAP cable Solution environment.
Do You know any BAPIs to use instead of calling the transactions? Maybe there are standard ones, which contain cable solution modifications...
Otherwise I thought about building frame BAPIs and calling the transactions inside of it. Do You think it´s possible to realize that by batch-input?
I need some other opinions and ideas to this problem.
Thank You for Your help!
Reward points guaranteed

Hey Ravi,
ok, I'll try that!
I'm not that deep into the module of material management. Do You have a tipp, how I can find out, if these functions are also working with the cable materials?
When I'm running the function bapi_matphysinv_create_mult, a document has been created. But I'm not sure, if it's using the cable specials...
Thank You

Similar Messages

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

Call Transaction from Program by Skipping Initial Screen & Pass the Value

Hi All,
Can anybody help me to call a transaction from my program. I do not want to display the initial screen of the transaction but that TCODE should get opened by passing the values to the parameter of the initial screen.
For Example, in my program I want to call 'SE38' and in that, my Program of Name 'ZTEST' should get opened. So I need to call Transaction SE38, but I donot want to display initial screen of that. Instead of that, I want to put the value of Program 'ZTEST' and thus my program should get opened.
Sandip

Hello Sandip,
Since you have not made any references to Batch Processing, I shall tell you the normal way to do it. First look at the code below and execute it.
set parameter id 'DTB' field 'VBAK'.
call transaction 'SE16' and skip first screen.
There are a few things that you need to keep in mind before you use this statement:
1. All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters.
2. For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number. However, if the next screen can be reached from the first screen by just hitting the Enter key, this will work.
The following will not work as you expect, because the next screen in the transaction cannot be reached by just hitting the Enter Key.
set parameter id 'RID' field 'ZTEST'.
call transaction 'SE38' and skip first screen.
Regards,
Anand Mandalika.
Please reward points if this helps.

Calling Transaction from other system using RFC

Hi ,
I have one button on screen(say Screen-A), in ECC. when its pressed the transaction '/SAPAPO/BOPIN' gets called from APO.
For calling transaction from APO I am using FM - 'ABAP4_CALL_TRANSACTION'.
I want the initial screen of that transaction to retain some values which I fill on the Screen-A(the screen which has that button).
When I call the transaction from ECC itself (ex. C006), the initial screen of C006 retains the value on Screen-A.
I want the same to happen in case of calling transaction from APO.
How to achieve this? Would it need the changes in IMG (SPRO)?
Please note that, Screen-A is initial screen of transaction 'md05' and I want to retain vaules of Material, MRP Area, Plant.
Thanks,
Sujeet

Builld a RFC enabled FM () that wrap the call of Smartforms (*) in the other system.
Regards,
Raymond
(*) [Writing Remote Function Modules in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
(**) [Integrating the Smart Form into the Application|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm]

I need to invoke Excel from Reports 3.0.

I need to invoke Excel from Reports 3.0. I need to insert into
Excel Data which is output of a report. Can someone help me with
a sample code of how we can invoke Excel and Get data.
Thanks in Advance
Ravi

Ravi,
The Forms Demos include an example of how to do this.
It will be easy to adapt to Reports (the OLE2 built-ins are the
same).
Also, Reports 3.0 is quite old and not supported anymore.
Hope this helps,
Pedro
[email protected]

Calling Forms from Reports

Hi...
We can call Reports from Forms using RUN_REPORT_OBJECT or RUN_PRODUCT. Can we call Forms or any other product from Reports? If so, how can we do it? If anyone can help me in this...

Hi Gayathri
As such there is no product integration for calling Forms from Report. You can call 6i graphics from Reports 9i if you are running a 6i rdf file with OGD object in it and if you have a 6i home set in the same machine where Report s9i is running. For Form, if you wish to run it as an independent request, in Reports 9i, you can always import a java class in Reports and then call that class method in any of the triggers which in turn send out a Forms request to Forms servlet.
Thanks
Rohit

ESS throwing error while calling transaction from R/3

Whenever u try to pull certain I-view like under ESS > Income tax provisional statement then the portal throws below mentioned error. Portal is not able to call transactions from R/3.
Error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://dev.mglep.com:26000/sap(ZT0yZElaRG5xNDlZdFF4aGcyTDhzMWxRLS1hVUR5bDBMbjBDZ2hWUUcyMlZmcmlBLS0=)/bc/gui/sap/its/webgui?
The following error was encountered:
Connection to 69.43.161.156 Failed
The system returned:
(111) Connection refusedThe remote host or network may be down. Please try the request again.
Your cache administrator is root.
Please help

Hi,
Please check the parameters that has been defined in SICF for the transaction you are using.
With Regards,
Kaustuv Goswami.

Call transaction from the ABAP report

Hi Gurus,
Please help me with suggestion. I would like to access from SAP report with double click transaction FB03. I can access it, but in old transaction view ... How can I get the new transaction view?
Here is the code,
BR
Saso
IF fieldname CS 'BELNR'.
PERFORM bdc_screen USING 'SAPMF05L' '100'.
      PERFORM bdc_field USING 'RF05L-BELNR' fieldvalue.
      PERFORM bdc_field USING 'RF05L-BUKRS' '0008'.
      PERFORM bdc_field USING 'RF05L-GJAHR' int-gjahr.
      PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
      CALL TRANSACTION 'FB03' USING bdc_data MODE 'E'.
      REFRESH bdc_data.
ENDIF

Try this Example:
REPORT ZABHI_TABSTRIP NO STANDARD PAGE HEADING
             LINE-SIZE 80 LINE-COUNT 60.
TABLES : sscrfields.
DATA activetab(6) TYPE c .
DATA mat_des TYPE makt-maktx.
DATA pl_des TYPE t001w-name1 .
DATA mat_gro TYPE mara-mbrsh .
DATA mat_typ TYPE mara-mtart .
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-002 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-010 FOR FIELD matnr.
PARAMETERS matnr TYPE mara-matnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-003 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-020 FOR FIELD matnr.
PARAMETERS werks TYPE t001w-werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN END OF SCREEN 002.
SELECTION-SCREEN BEGIN OF SCREEN 003 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-004 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-030 FOR FIELD matnr.
PARAMETERS mbrsh TYPE mara-mbrsh.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
SELECTION-SCREEN END OF SCREEN 003.
SELECTION-SCREEN BEGIN OF SCREEN 004 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block4 WITH FRAME TITLE text-005 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-005 FOR FIELD matnr.
PARAMETERS mtart TYPE mara-mtart.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block4.
SELECTION-SCREEN END OF SCREEN 004.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 5 LINES NO INTERVALS.
SELECTION-SCREEN TAB (15) tabs1 USER-COMMAND ucomm1
                                    DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (15) tabs2 USER-COMMAND ucomm2 .
SELECTION-SCREEN TAB (15) tabs3 USER-COMMAND ucomm3.
SELECTION-SCREEN TAB (15) tabs4 USER-COMMAND ucomm4.
*                     DEFAULT SCREEN 002   .
SELECTION-SCREEN END OF BLOCK tabb1.
INITIALIZATION.
   tabs1 = text-002.
   tabs2 = text-003.
   tabs3 = text-004.
   tabs4 = text-005.
   activetab = 'TABS1'.
AT SELECTION-SCREEN .
   CASE sscrfields-ucomm.
     WHEN 'UCOMM1'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 001.
       tabb1-activetab = 'TABS1'.
       activetab = 'TABS1' .
     WHEN 'UCOMM2'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 002.
       tabb1-activetab = 'TABS2'.
       activetab = 'TABS2'.
        WHEN 'UCOMM3'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 003.
       tabb1-activetab = 'TABS3'.
       activetab = 'TABS3'.
        WHEN 'UCOMM4'.
       tabb1-prog = sy-repid.
       tabb1-dynnr   = 004.
       tabb1-activetab = 'TABS4'.
       activetab = 'TABS4'.
   ENDCASE.
START-OF-SELECTION.
   CASE activetab.
     WHEN 'TABS1'.
       SELECT SINGLE maktx FROM makt INTO pl_des WHERE matnr = matnr.
       WRITE: 'Material ' , matnr , mat_des .
       WHEN 'TABS2'.
       SELECT SINGLE name1 FROM t001w INTO pl_des WHERE werks = werks.
       WRITE: 'Plant ' , werks ,pl_des.
     WHEN 'TABS3'.
       SELECT SINGLE mbrsh FROM mara INTO mat_gro WHERE mbrsh = mbrsh.
       WRITE: 'Material Group ' , mbrsh ,mat_gro.
       WHEN 'TABS4'.
       SELECT SINGLE mtart FROM mara INTO mat_typ WHERE mtart = mtart.
       WRITE: 'Material Type ' , mtart , mat_typ.
       ENDCASE.
And let me know.

Calling Transaction from ALV using OO Method

Hi,
My requirement is as follows....
I have an ALV grid with columns such as month wise Total of a GL account say JAN, feb etc...
When I double click on any of these cells it should take me to the respective Transaction (say FBL3n for the GL account and the company code) . I am able to track the GL account for which the total is displayed and company code is one of my selection criteria. In the main screen of the FBL3N we have to enter the posting date and i also want the Radio button against "all items', presently default is against 'Open Items'. So how can i proceed.
Thanks and Regards,
Namit

DATA gr_event_handler TYPE REF TO lcl_event_handler . .. ..
*--Creating an instance for the event handler
CREATE OBJECT gr_event_handler .
*--Registering handler methods to handle ALV Grid events
SET HANDLER gr_event_handler->handle_double_click FOR gr_alvgrid .
CLASS lcl_event_handler IMPLEMENTATION .
*Handle Double Click
METHOD handle_double_click .
PERFORM handle_double_click USING e_row e_column es_row_no .
ENDMETHOD .
CLASS lcl_event_handler DEFINITION
*Double-click control
Methods:
handle_double_click
      FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING e_row e_column
           i_fieldrows      TYPE lvc_t_row.
           w_fieldrows LIKE LINE OF i_fieldrows,
CALL METHOD o_alvgrid->get_selected_rows
             IMPORTING
             et_index_rows = i_fieldrows.
LOOP AT i_fieldrows INTO w_fieldrows.
    READ TABLE i_batch INTO w_block INDEX w_fieldrows-index.
if sy-subrc = 0.
*       CLASS LCL_EVENT_RECEIVER DEFINITION
CLASS LCL_EVENT_RECEIVER DEFINITION.
* Event receiver definitions for ALV actions
PUBLIC SECTION.
    CLASS-METHODS:
* Row Double click for dirll down.
       HANDLE_DOUBLE_CLICK
         FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
            IMPORTING E_ROW
                      E_COLUMN
                      ES_ROW_NO.
ENDCLASS.
* Implementation
* Every event handler that is specified below should also be set after
* the object has been created. This is done in the PBO processing.
* with the following command
* SET HANDLER oEventreceiver->handle_toolbar FOR o_Alvgrid.
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
*&      Method handle_double_click
* This method is called when the user double clicks on a line to drill
* down.
* The following are exported from the ALV
* LVC_S_ROW
* LVC_S_COL
* LVC_S_ROID
METHOD HANDLE_DOUBLE_CLICK.
* The double click drill down processing should be
* coded in the form below.
   PERFORM F9007_HANDLE_DOUBLE_CLICK USING E_ROW
                                           E_COLUMN
                                           ES_ROW_NO.
ENDMETHOD.
ENDCLASS.
*&      Form F9007_HANDLE_DOUBLE_CLICK
* This form is called when the user double clicks on a line to drill
* down.
*      -->P_E_ROW_ID    - Row ID text
*      -->P_E_COLUMN_ID - Column ID
*      -->P_ES_ROW_NO   - Row number
FORM f9007_handle_double_click USING p_row
                                     p_column
                                     p_row_no.
DATA: lw_output LIKE LINE OF i_output.
* RG:16/11/2004 - Start of Changes
* Need to check that a subtotal or grand total line has not been
* double-clicked, otherwise the report will produce a short dump!
check p_row+0(1) is initial.
* RG:16/11/2004 - End of Changes
READ TABLE i_output INDEX p_row INTO lw_output.
CASE p_column.
    WHEN 'KNUMA'.
      IF NOT lw_output-knuma IS INITIAL.
        SET PARAMETER ID 'VBO' FIELD lw_output-knuma.
        CALL TRANSACTION 'VBO3' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN 'VBAK_VBELN'.
     IF NOT lw_output-vbak_vbeln IS INITIAL.
      SET PARAMETER ID 'AUN' FIELD lw_output-vbak_vbeln.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
      ENDIF.
    WHEN 'VBRK_VBELN'.
      IF NOT lw_output-vbrk_vbeln IS INITIAL.
        SET PARAMETER ID 'VF' FIELD lw_output-vbrk_vbeln.
        CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.                    " F9007_HANDLE_DOUBLE_CLICK

Call transaction from alv

i am calling a transaction from alv i want to select the check boxes on th called transaction and go to the next screen how do i do that

Hello Chandan
You have to handle the DOUBLE_CLICK event either in your callback form routine (FM-based ALV) or event handler method for event USER_COMMAND (ABAP-OO based ALV).
If you call the transaction directly you will not have the authority check for this transaction. If you need this, you can use function module <b>ABAP4_CALL_TRANSACTION</b> instead.
If you want to open the transaction in a new window you can use the static method <b>CL_RECA_GUI_SERVICES=>CALL_TRANSACTION</b> (no authority check!).
Regards
Uwe

Call transaction from RFC?

Hi Experts,
I need to call Different transactions from a RFC.
I am looking for different approaches to achieve this.
One Idea is RFC will take input parameters as
-Transaction name
-Field names to be updated with its values (as a table)
Now in RFC, it should be able to update this transactionu2019s fields with the values provided in table parameter.
RFC will fill up the BDC table with the needed data, and will call the needed transaction to update the data.
Once the execution is complete, RFC will send back the different messages (error, info, and warning) through Table parameter.
Now, I do not have much of ABAP experience so I need your help in following
1)     Should I use BDC recording in RFC?
2)     Can BDC send back all the messages encountered while calling the transaction?
3)     Is there any other way to approach this requirement?
Thank you in advance.
Regards,
Ashish Shah

Hi Amitava,
This RFC might be called from any WebBased application , like Portal , Visual Composer or WebDynpro for Java.
One more idea , may be an extension to my current idea is:
To add one more input parameter to RFC, a table with single field of type string.
Populate this table with entire BDC recording for one particular transaction, and pass it as an input parameter of RFC.
Once in RFC , this BDC recording can be used to populate BDC table and then pass this table to call transaction statement.
Do you see any sense in this logic?
Regards,
Ashish Shah

Error calling transaction from a transaction

Hi,
I have created a transaction to batch Measurement Point readings for the PM Module. The batch uses a query to determine the tags required to update and it calls the "MeasurementPointWrite" transaction that I downloaded from SAP. My problem is when I run the batch transaction it reports "TransactionLoadException: Unable to find transaction file specified"
Has anyone seen this issue?
The following shows the relevant log dump:
[DEBUG] [MPWriteCall]: Started action execution
[DEBUG] [MPWriteCall]: Type: TransactionCall, Description: MeasurementPointWrite Transaction Call
[DEBUG] [MPWriteCall]: [Initializing Action][Initializing Parameters: [MPWriteCall.StoreTransactionOutput = MPWriteCall.StoreTransactionOutput=[boolean:false]][MPWriteCall.ResetState = MPWriteCall.ResetState=[boolean:true]][MPWriteCall.Persist = MPWriteCall.Persist=[string:INHERIT]][MPWriteCall.Async = MPWriteCall.Async=[boolean:false]][MPWriteCall.Expiration = MPWriteCall.Expiration=[long:21600000]]]
[DEBUG] [MPWriteCall]: Resolving Input Links
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reader, Type [Assign], Time [ <1 ms], Expression: "PCS7 Automatic"
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DebugFlag, Type [Assign], Time [ <1 ms], Expression: Transaction.DebugFlag
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.MeasurementPoint, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/POINT}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reading, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/Value}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Text, Type [Assign], Time [ <1 ms], Expression: "PCS TimeStamp: "&PCSTagRepeater.Item{/Row/TimeStamp}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateOutputXML, Type [Assign], Time [ <1 ms], Expression: Transaction.CreateOutputXML
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateNotif, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.NotificaitonType, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DifferenceFlag, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] Action parameter creating time [ <1 ms]
[DEBUG] Entering action 'MPWriteCall' implementation.
[DEBUG] [] Loading transaction from file.
[FATAL] [] Unable to find transaction in file system: .trx
[DEBUG] Exiting action 'MPWriteCall' implementation
[ERROR] Error found trying to execute action 'MPWriteCall' Exception: [Unable to find transaction file specified]
[WARN] [MPWriteCall] Skipping execution of output links due to action failure.
[ERROR] [MPWriteCall] Action: Runtime threw an exception. Exception: [com.sap.xmii.bls.exceptions.TransactionLoadException: Unable to find transaction file specified]
[DEBUG] [MPWriteCall]: Finished[ <1 ms] Succeeded: false

For what it's worth, it appears to be a problem at the source. I have the same problem with the same downloaded file. Looking at the xml, there is an error in the self-reference of location. I was unable to figure out how to modify the xml of the export such that a reimport would fix it. (Export it and look at the xml - do a find on MeasurementPointWrite and you will see what I mean).
However, try the following:
Create a new transaction.
Copy the top sequence and include children of the MeasurementPointWrite transaction (basically you are copying the entire transaction contents).
Paste it to the empty sequence in your new transaction.
Save it under some name.
Create another new transaction.
Drag and drop your first new transaction into the empty sequence of your second new transaction.
Now it works...
Go figure.
Regards,
Mike
Edited by: Michael Appleby on Oct 18, 2010 7:44 PM

Calling Form from Report

Hi all,
Please help me out, I need to call Form6i form Report6i.
Thanks in advance

Hi all,
the below mentioned documents will help u.
Under Developer 2000 (Release 1.2) on Windows, there exists a pl/sql library
which can be used to invoke excutables residing on the PC. The library
(D2KWEXEC.PLL, located in the FORMS45/DEMO/REUSE directory) is attached to
the Report in the following manner:
1) Modify the D2KWEXEC.PLL to change any references to the Forms built-in
MESSAGE to the Reports built-in SRW.MESSAGE.
2) Choose the 'Attached Libraries' section for your report and select the
'Navigator/Create' menu option - this will cause the 'Attached Library'
dialog to be displayed.
3) Use the 'Find' button to locate the library file (D2KWEXEC.PLL) and then
attached it to the report using the 'Attach' button. A warning is
displayed you that a hard coded path name is being used and gives the
option of removing it. If the full path is removed, then the
FORMS45_PATH variable will be used subsequently to locate the library.
The directory in which the library is located must be part of
FORMS45_PATH.
Then select the appropriate trigger from where Oracle Forms should be invoked
from. In that trigger reproduce the following code:
function return boolean is
command_string VARCHAR2 (100);
BEGIN
command_string := 'c:\orawin\bin\f45run.exe';
RETURN d2k_winexec.execute (command_string);
END;
Note: 'command_string' contains the full path of the Oracle Forms
Runtime executable.
When the trigger fires, the Forms Runtime Executable is invoked
automatically.
Regards
Gopinath M

Calling graph from Reports created in graphics builder?

Can you call a graph from Reports 6.0 that was created in Graphics Builder. I know you can call a graph from Forms. I tried creating my graph right in Reports with the wizard but for some reason it does not give me the fields I want to use in the available fields column, so I created the graph in Graphics Builder. Do you use a trigger of some sort. Any examples would be appreciated if this is possible. Thanks

Justin Beno:
Yes, you can call a graph from inside a report. All you need to do is select the button with the graph on it (not the icon with the wand, which indicates chart wizard). Then draw graph in the area of the report where you want the graph to display. After completing this, right click on graph, select Property Palette, Chart - Chart Filename (this is where you will type in the directory and filename of your graph that you created in Oracle Graphics).
~Vannette

Call transaction from mail

Hi;
i want to add a link in mail. when user click the link a transaction or report will run.
Best regards.
mustafa

hi
good
try like this
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
go through this example
REPORT ZSEND .
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: SY-UNAME TO RECEIVER-RECEIVER,
        'X'      TO RECEIVER-EXPRESS,
        'B'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
if find help ful reward point.
thanks
mrutyun^

Need to call transaction from report

Similar Messages

Maybe you are looking for