Need to capture entire contents of a mini DV

What is the easiest way to capture entire contents of a mini DV? Must I create an offline clip and specify the media start and end points and do a batch capture, or can I use Capture Now?
Thanks,
John Link

If you use Capture Now, it will get everything minus any preroll needed to start a new clip on a timecode break.
If you change Device Control to Non-Controllable Device, in the Capture Settings, you will get absolutely everything but there will be no source timecode. Should you ever need to recapture that will make it very difficult/almost impossible to recreate your work accurately.

Similar Messages

Praviliuon dv7 hard drive; need to transfer entire contents to new hard drive

My hard drive is on it last leg and
I would like to transfer the entire contents to a new drive to invlude my operating system.

Hi,
If your current HDD is still working, try making a Image of the drive.
You can use Windows 7 Imaging utility to back-up a copy of your HDD to an external HDD - the procedure is described on the following link.
http://www.shivaranjan.com/2009/05/20/windows-7-how-to-create-a-system-image-of-a-hard-disk-partitio...
At the end of this process, make sure you create the System Repair Disc.
You can then load this saved Image to your new HDD by booting from the System Repair Disc, selecting 'Repair Your Computer' and follow Method 3 on the link below.
http://www.shivaranjan.com/2009/05/21/windows-7-how-to-restore-windows-7-partition-or-hard-disk-part...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Capture Entire Beta Tape

I’m using FCP 6 with a Sony J-30 Beta Cam player, I just learned how to use Log and Capture to get clips from the beta cam player, but I was wondering if anyone knows how to get the entire content of a tape without the need for loging, will there be a way to insert a Beta tape and start capturing until the tape is done playing?
The reason I would like to do this is because we have thousands of Beta Tapes from 30 to 40 years ago that we will like to digitize and archive.
Any other helpful information would be appreciated.
Thanks in Advance.

Also make sure you put a check mark and time limit for 'Limit Capture Now to'...in your Systems Settings dialog.
If you don't, FCP will allocate the entire available drive space, since it has no idea how long to capture...and you'll end up with an unusable file.
I always set it for a couple of minutes beyond my longest tape to capture. If your biggest beta is a 40, then set it for 42. If you have a 90 min. tape, then set it for 92...etc.
You can set it for whatever you want (as long as it is more than you need) and it will not affect the length of any media to be captured.
K

Batch capturing entire tape...recomended???

Is it a good idea to attempt to batch capture a tape in its entirety? I am having problems doing this...I do a lot of events that last often over 2 hours. Instead of capturing footage in clips, I just capture the entire tape. When I'm done with the project, I simply make the clips offline.
I'm in the process of reviving a project now, and one tape in it's entirety(55 min approx), captured OK, but I am having problems with another tape. I am getting a broken timecode error, when I don't see how this is possible...because I let the tape freely run. Also, under the logging info, the media ends before the tape ends, which means that is space left on the end of the tape without any timecode. Yet when I batch capture, it still goes to the end of the tape.....isn't a batch capture suppose to go by the clips media in and media out points?
All help is greatly appreciated.

I do this often. There are two shools of thought on this method -
Capturing entire tapes allows one to scroll through non-linearly and make subclips. The advantage to subclips is that they are serachable and you can add comments. The downside to this method is that the files are large, and you may be capturing much more metarila than you need. I often do this when working on docs with very high shooting ratios. The most recent one had 190 tapes for a 1-hour program, which led us to use offline RT for our cutting format and then recapture for online.
Logging and capturing single clips fives you the advantage of starting out capturing only what you know you might use, you can input the logging info at the start, and will have several small clips that may be easier to manage. Since at some point you'll have to familiarize youself with the matreial anyway, you might as well do it at the logging stage.
Several factors can contribute to perceived TC breaks - reusing tapes, camera stops, shooting format (HDV, for instance, will show a TC break each time the camera stops). If you are capturing whole tapes, you might do well to let FCP create new clips on TC breaks and just let it roll. Make sure the TC format matches between your tape and settings (DF vs. NDF)
Regarding rolling off the end of the tape during capture, you might be very close to the end with the clip you are capturing. You might try lowering the post-roll value in the device control preset in your A/V settings.
Hope this helps -
Max Average

Script needed to print complete contents in scrolling text field Acrobat Pro 9 (MAC)

I've seen this question several times in my search but no real solution. My client wants a form with text fields that only show 1-2 lines when viewed on-screen but are scrollable so that the user can input a lot of text. I had no problem creating that. The problem occurs when I try to print the form. Only the visible lines of text print and not the entire contents of the field.
Is there a Javascript that I can assign to a Print button in my form that can be assigned to the Mouse Down action that will make the entire field contents print? I even recreated the form in WORD so that when the user inputs text into the field, the contents of the form move down the page. My client didn't like that approach. I'm not a programmer and so I haven't been able to write my own script to handle the printing issue. I'm MAC based so using Livecycle isn't an option for me. Thanks!

I'm using Acrobat Professional 9. I used to use Livecycle which was more flexible, but I no longer have a PC, only MAC and Adobe doesn't make Livecycle for the MAC.
The client doesn't want larger fields unfortunately. They have questions that require 2 or 3 pages of information to be entered into a small text field but they don't want large fields. If they're reviewing the answers online, it's fine - they can just scroll through the text fields and read the answers but they don't want the completed text fields to expand unless the form is printed.
I've already set up my text fields to be multi-line and scrollable so that the client can review all of the text in the field if they are looking at the saved PDF online. The problem I'm having is that I need the entire contents of the text field to be visible ONLY when printed out. They don't want larger fields to show in the form. The client was quite specific about it. The form is also going to be used infrequently, so collecting the data and storing it on a server isn't something they're particularly interested in. The information is also confidential, so they do not want me to be collecting and storing the data and sending it back to them in another format. The easiest option I could see was to create a script tied to a PRINT button that printed out the complete text field.
Thanks!

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

Need to capture RWB alerts to CCMS

Dear All,
I have configured for Alerts in RWB to capture Integration and Adapter Engine failure messages.
I am getting a detailed description of alert text in the alert inbox.
Example:Error found in MAPPING.EXCEPTION_DURING_EXECUTE for the MAPPING Category in the Message ID XXXX for the Interface XXXX from the Sender Party XXXX.
Now my requirement is I need to capture the detailed text message in CCMS.
Note: I have added the rule CCMS_GET_MTE_BY_CLASS and specified R/3 system ID (SID) and MTEClass as SXI_RWBAlerts in RZ20.
I am getting only the Number of active alerts for the defined Alert Category and the number of alert rules created in RWB.
Number of active alerts 2
Assigned alert rule: 1 Alert for Application Category error
Assigned alert rule: 2 Alert rasied for all IE/AE failures
What is the method need to be assigned to capture the detailed error text messages from RWB?
Regards
B.Dheepa

Hi
CCMS alert guide- May be useful in your case..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/aeeda66b-0a01-0010-6884-876fac1c4a2d
Alert Monitoring and Notification Mails
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/ae8d4243a5de54e10000000a155106/frameset.htm
this link contains a list of conatiner variables that can be used while configuring Alerts,
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
regards,
Surya

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive. The hard drive has been in service for almost two years performing this function with no sign of failure. How do I adjust time machine perameters?

The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)

"I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)"
That was all I could put in the initial "box." Then it brought me to this page with instructions on how to write a good sentence.
Proceeding ...
After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
Help ...
Running 8.0 on 5S
Thanks!

Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

Ipod dumps entire content and must be restored and synced each time.

Second Generation iPod Nano. iTunes on Dell XPS410, Windows Vista.
Battery depleted. Plugged Nano into computer. Got a "may be corrupted screen; try restoring"♦Computer recognizes Nano; I restore and screen confirms successful restoration and tells me to sync. Sync takes place and completes successfully however my Library for the Nano device shows in "graytone" and cannot be accessed. I eject the Nano; unplug it from the computer and it works fine. Once I again plug it into the computer, everything dumps out of the Nano and I have to start the Restore/Sync process all over again. Each time the Nano is unplugged and replugged to the computer iTunes it dumps its entire content!
Would most appreciate any suggestions!

I have tried connecting the ipod via the front and back USb 2.0 jacks on my desktop. I have only one external drive connected to the computer. Doesn't matter whether I remove it or not, the same problem occurs. I do not have a network. My drive letter for the ipod is letter z so it is not disk recognition which is a problem. 1/3 of my music comes from I-tunes, the rest I rip from my Cd's (like Linkin Park, Slipknot, Dir en grey). I only used about 650 MB worth of the ipods 30 gig drive capacity. Doesn't matter which version of the itunes software I use, it gives me the same problem. The recovery loop occured after just after 2 weeks of purchasing it from the apple storeand I took it back with only 12 songs in it. The restored it and 10 days later, the same problem occured. Recently, the ipod has been entering the recovery mode much more frequently prompting me to believe the hard drive is malfunctioning.
I have scanned my computer and the Ipod with everything from Norton, AVG, McCafee, and trendmicro and found no viruses, bugs, worms, etc.
Any suggestions to help me resolve this issue would be greatly appreciated.
Thanks,
Ice

I need to erase all Contents and Settings from my i phone 5 but I forgot the restrictions passcode. How can I get it. ( Idon't have access to i tunes). Thanks.

I need to erase all Contents and Settings from my i phone 5 but I forgot the restrictions passcode. How can I get it. ( Idon't have access to i tunes). Thanks.

Not possible. You need access to iTunes.
The passcode will be required to make changes to these settings or to disable Restrictions. Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
The above comes from here:
http://support.apple.com/kb/HT4213

How do I mark the entire contents of a RichTextBox (gRTbxInfo) with a background color of white?

How do I mark the entire contents of a RichTextBox (gRTbxInfo) with a background color of white?
I have code that finds / marks words with a different color. Now I want to remove that color. I've started with the following, but cannot complete it.
    //int iLength = gRTbxInfo.Length
    int iLength = 10;
    TextRange trText = new TextRange(gRTbxInfo.Document.ContentStart, gRTbxInfo.Document.ContentEnd);
    TextPointer tpStart = trText.Start.GetInsertionPosition(LogicalDirection.Forward);
    TextPointer tpSelectionStart = tpStart.GetPositionAtOffset(0, LogicalDirection.Forward);
    TextPointer tpSelectionEnd = tpSelectionStart.GetPositionAtOffset(iLength, LogicalDirection.Forward);
    TextRange tpSelection = new TextRange(tpSelectionStart, tpSelectionEnd);
    tpSelection.ApplyPropertyValue(TextElement.BackgroundProperty, new SolidColorBrush(Colors.White));
bhs67

Isn't that just
TextRange tr = new TextRange(rtb.Document.ContentStart, rtb.Document.ContentEnd);
tr.ApplyPropertyValue(TextElement.BackgroundProperty, Brushes.White);
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

If the drive has failed the only way to get any data off it is to send it to a Data Recovery company. Which is very expensive and no guaranty they will be able to retrieve any data.
That is why Apple has included a system to backup your Mac on a regular basis, Time Machine. Also there are other Apps to do basically the same thing by Cloning your internal drive to an external drive. Carbon Copy Cloner and SuperDuper. Along with using Disk Utility to Image the internal drive to an external drive.
Sorry to tell you but if the drive has really failed your Data is gone unless you pay a large sum of money to one of the Data recovery companies.

XI needs to capture the form back in the mail adapter

Hi Experts,
I am working on a scenario where , data needs to be sent from SAP and in XI , a form sort of( like a web form or pdf form) needs to be created. This form needs to be emailed ( using the mail adapter ) to an outside entity. They will fill out the form and email it back. XI needs to capture the form back in the mail adapter translate it and put the data back into sap.
Can some one help me out with this ?
Regards,
Hemanthika

Hi patnaik
Follow these links to covert to PDf and then mailing through mail adapter
Converting Smartform into PDF and sent to EMAIL
Check this..Smartform as attachment in mail. - 46k
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/convert-smartforms-form-in-pdf-998715 - 87k
SMART form to PDF
https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
smartform to MAIL
https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment
regards
Sandeep sharma
If helpful kindly reward points

Need to capture entire contents of a mini DV

Similar Messages

Maybe you are looking for