Need to capture RWB alerts to CCMS

Dear All,
I have configured for Alerts in RWB to capture Integration and Adapter Engine failure messages.
I am getting a detailed description of alert text in the alert inbox.
Example:Error found in MAPPING.EXCEPTION_DURING_EXECUTE for the MAPPING Category in the Message ID XXXX for the Interface XXXX from the Sender Party XXXX.
Now my requirement is I need to capture the detailed text message in CCMS.
Note: I have added the rule CCMS_GET_MTE_BY_CLASS and specified R/3 system ID (SID) and MTEClass as SXI_RWBAlerts in RZ20.
I am getting only the Number of active alerts for the defined Alert Category and the number of alert rules created in RWB.
Number of active alerts 2
Assigned alert rule: 1 Alert for Application Category error
Assigned alert rule: 2 Alert rasied for all IE/AE failures
What is the method need to be assigned to capture the detailed error text messages from RWB?
Regards
B.Dheepa

Hi
CCMS alert guide- May be useful in your case..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/aeeda66b-0a01-0010-6884-876fac1c4a2d
Alert Monitoring and Notification Mails
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/ae8d4243a5de54e10000000a155106/frameset.htm
this link contains a list of conatiner variables that can be used while configuring Alerts,
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
regards,
Surya

Similar Messages

RWB alerts from PI7.1 to Solution Manager via CCMS

Dear All,
I have configured the alerting in RWB to capture Integration and Adapter Engine failure messages.
I am getting a detailed description of the alert text in the Alert Inbox.
Now my requirement is: I need to capture the detailed text message in CCMS to send it back to Solution Manger
(which sends mails through an auto-reaction method)
Could you please give me the necessary configuration steps on the PI and Solution Manager?
Regards,
Murielle

Helloo Mike,
I did tried this but its giving error "Cannot reach the URL (HTTP Code 110: HTTPIO_PLG_CANCELED)" When hitting the check. I am not sure if there is some prerequistes need to be performed before maintaining the url.
I am maintaining the Htttps and the relevant configuration has been done in webdispatcher system.
Appreciate your inputs inthis regard.
Best Regards,
Satyabrat

RWB Alert is not comming in Alert Inbox

RWB Alert- i am unable to get alert in my Alert Inbox but when i am triggering through FM it is showing in inbox, can anyone suggest me what more need to be done so that i can recieve automatic?
FYI--I have done all the steps required for configuration and also schedule background job.

Hi,
And also check
2. Settings in the Exchange Profile
Access the exchange profile at
http://<J2EE-host>:<J2EEport>/
exchangeProfile, where
<J2EE-host> is the host name of
your J2EE Engine, and <J2EE-port>
stands for the HTTP port of the
engine.
Make sure that the following
exchange profile parameters for the
central monitoring server have
correct values:
com.sap.aii.rwb.server.
centralmonitoring.
httpport
This is the HTTP port of the
ABAP stacks.
com.sap.aii.rwb.server.
centralmonitoring.r3.
ashost
com.sap.aii.rwb.server.
centralmonitoring.r3.
client
com.sap.aii.rwb.server.
centralmonitoring.r3.
sysnr
If you are using a separate
central monitoring system,
enter its values here.
If you are also using the
Integration Server for
monitoring, enter the
corresponding values as
well.
3. Refresh Exchange Profile
Parameters
If you change the parameters, you
have to update the RWB. You do
this by either restarting the RWB
application in the Visual
Administrator or calling the following
URL:
http://<J2EE-host>:<J2EEport>/
rwb/rtc?op=init
Regards
Seshagiri

Create rules in RWB - Alert Configuration is not possible.

Hi
I'm setting up alerts on a PI-server.
However, when I try to create alerts in Runtime Workbench -> Alert Configuration, I am not allowed tou2026 I.e the u201CAdd Ruleu201D-button is never possible to use. I add a description and interface names. But the buttons stays dimmed like I'm not authorized or similar.
I do have all roles, even SAP_ALL so it shall be no problem with authorization.
Do I need to setup something in NWA or similar to enable this?
/Best Regards
Joakim

It seems to be a tricky issue.
I do have have the roles:
S_ALM_ROLE
S_ALM_CONF
S_ALM_CUST
and also SAP_ALL
What I do
1) Starts RWB -> Alert config
2) Adds description and interface names for my rule.
3) Tries to select one of the available alert categories below so the AlertCategory is entered and the "Add rule"-button becomes available. (It's always grey).
I also try to do step 3 before step 2.
This is a showstopper... I'll probably create an OSS-case instead. Unless nobody shouts "Herureka, I know the solution!"
/BR
Jocke

Application Alert Categories CCMS :CEN

hello all,
I have been working on central alert configuration and have seen variety of posts on this. Thanks to SDN.
i have also seen forum posts reg. Application related alerts(RWB Alert Categories) to Central CCMS.
I have earlier configured Alerts by defining alert categories and rules through RWB and receive email over those on individual remote system.
but with Central CEN as is the architecture, i want to monitor everything through CEN. Now for this i have configured remote system to report CCMS alerts ( inc RWB Categories ) to CEN.
After this i can see in RZ20 :
Tree node of :
RWB Alert Categories : Active Alerts
|
><Alert Category Name>
.........|
.........----->No. of Active Alerts
.........----->Assigned rule ( i) <Rule_name>
Even through i can see alerts in CEN (under system alerts ) and above RWB Alert Categories goes red when an issue comes , i cant see the exact error text defined in Alert categories under this tree ?. i.e. Short text or Long text.
Any clue how to link that error text defined in Alert Categories of Remote system and rule specs to CCMS, aswell will be of great help.
Krishna

Hi,
Have not had the chance to work onm CCMS , but, this link should surely help,
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
Regards
Bhavesh

Transported Alert rule not visible in RWB - Alert Configuration

Hi ,
I have Transported Alert rule Using Below mentioned blog ..
Know How to Transport Only the Required Alert Rules !!!
I have followed the following Procedure
1. Go to Transaction SE16 Data browser.
2. Give the table name as SXMSALERTRULES and hit F7. Then Execute (F8).
3. Copy the ALERTHASHVAL field value of the entries that needs to be transported.
4. Go to transaction SE10 and Create a Workbench Request.
5. Select the Task under Workbench Request and Go to Menu Request/Task -> Change Type and select Development/Correction.
6. Double click the task and go to edit mode.
7. Enter Program ID: R3TR, Object: TABU, Objects Name: SXMSALERTRULES, press Enter and click on Functions.
8. Paste the ALERTHASHVAL field value copied in Step-3 and Save.
Now I can see the transported entries in SXMSALERTRULES table . But when I check RWB- Alert Configurations .. There is no new entry for above transported rule ...
Please tell me what is missing or where am i wrong ...

Yes, My problem is Resolved ....
Solution : -
After Transport All Alert Rules, - >
I created Manual entry for any one of the alert rule from Alert Configuration. ->
Then automatically all other transported rule came into visible state ....
So now i can see all my transported rule in Alert Config...
I dont Know , How does it happaned .. But it worked for me ... All rules got visible to me only after creating a manual entry for amy one of the alert rule ...
Hope it helps someone else ...
Guys thanks for all your comments ...
Regards
PS

RWB Alert Inbox Subscription No Alert Categories found

Hi,
In RWB> Alert Inbox> Subscription link, I could not find any Alert Categories.
Alert Inbox wokrks fine.
In the RWB> Alert Categories, every thing works fine and I can see the alert categories.
We r on NW 2004S PI 7.0 Service Pack 09.
reg,

Hi,
You should have the subscription authorization!
While defining the Alert Category in ALERCATDEF, you need to go to Sunscription Authorization and then give the roles who can subsrbie to this alert.
Then log on to the Alert inbox with an user id that has the same role and you will be able to see the Alert Categories.
Regards,
Bhavesh

Fwding alerts from CCMS to ALM

Hi all,
I am working on fwding alerts from CCMS to ALM.
We have solman in place fully configured. I have followed guides from service.sap.com/alert page.I can see alerts generated from the alert test report RSALERTTEST in the mail box(say Outlook) but not in the alert inbox of RWB
Can any one please help me on this.
reg

Did you configure ALM to run on your XI machine or on SolMan?
If it runs on Sol Man you won't be able to see them on XI RWB.
To find your alerts lokk at:
http://<host>:<port>/sap/bc/bsp/sap/alrtinbox
where host:port is the host where ALM runs. Note that the BSP service must be active in the trx. sicf.

RWB Alert categories: active alerts - how I can analyze?!

Hello @ all, how I can analyze the following RZ20 alerts.
RWB Alert categories: active alerts
    ALRTFRMWRKTEST
        Number of active alerts    1                     , rot 09.04.2008 , 16:15:28
        Assigned alert rule: 1     Message-based Alerting
    CCMS TEMPLATE
    CMA_ALERTS
    CMA_MSG_BASED
    PROCESS ALERT
    RCVR_DETERMINATION
    SECSSFCERTEXPIRE
    XISTAMMDATEN

Hi Carlos,
Just a word of hint : Please search before you post. There are lots of information on SDN and other portals.
One of them is [here|https://www.sdn.sap.com/irj/sdn/inf?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52] for you.
Regards,
Srihari

Roles needed for creating the alerts

Hi All,
I'm getting the below error in RWB when trying to open the alert configuration.
404 Not Found
The requested source doesnot exist
Is the above error due to not having roles ?
If so what are the roles that I need to have so that I can create an alert.
Thanks and Regards,
Pruthvi.

Hello,
I'm not sure if this error is in regard of roles. If it would, you'd get the 401 error (Unauthorized).
From the generic 404 error for XI/PI, check the blog "/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
If nothing there fits to you, check notes:
#750287 - XI 3.0 Runtime Workbench: Alert configuration does not start
#768456 - Troubleshooting Runtime Workbench XI 3.0
#813703 - XI RWB alert configuration is incompletely displayed
And last ensure you use the FQHN.
Restart the RWB service after all.
Regards,
Caio Cagnani

XI needs to capture the form back in the mail adapter

Hi Experts,
I am working on a scenario where , data needs to be sent from SAP and in XI , a form sort of( like a web form or pdf form) needs to be created. This form needs to be emailed ( using the mail adapter ) to an outside entity. They will fill out the form and email it back. XI needs to capture the form back in the mail adapter translate it and put the data back into sap.
Can some one help me out with this ?
Regards,
Hemanthika

Hi patnaik
Follow these links to covert to PDf and then mailing through mail adapter
Converting Smartform into PDF and sent to EMAIL
Check this..Smartform as attachment in mail. - 46k
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/convert-smartforms-form-in-pdf-998715 - 87k
SMART form to PDF
https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
smartform to MAIL
https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment
regards
Sandeep sharma
If helpful kindly reward points

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

Viewing alert in my RWB ALERT INBOX !!!

Hi all
I have read the blogs/forums in order to implement my alert inbox but until now I don´t know why my I can not see my alerts in the Run Time Workbench Alert Inbox.
Please see the steps that I have performed.
In the Abap Side
I have created an alert category D with this information:
    In the properties tab I fill the values fields for Description,priority,Max no of   dels,expiry time in min, escalation active,escalation recipient,tolerance
   In the container tab I have entered some variables
   I fill the long and short text for email
In Settings ---Configurations      I have only filled the status handling mails for errors status and the logging fields
In the Runtime Work bench Alert Configuration
I have created a new rule for my category
When I go to the rwb alert inbox , no error was triggered
In the SLG1 transaction for alert I have this error : No e-mail address is entered in Customizing for XML forwarding
Do I have to enter an email address in the Settings ---Configurations?
My purposes are to show the error alerts in RWB alert inbox
In my above descriptions do I had to configure something else?
be aware that services are running ok .Please give me a step by step action that I have to realize in order to trigger the alerts in the RWB alert inbox.
I have already read the forums, blogs and note for this, I am a little confused because my implementations are not working.

Hi,
Try this...
     1.      From the alert category definition environment (transaction ALRTCATDEF), choose Settings -> Configuration.
       2.      Ensure you are in change mode.
       3.      If you want to be able to confirm alerts by SMS or Internet mail, you must enter the user created to receive all incoming mails in the Inbound Processing section. For more information, see Alert Confirmation.
       4.      In the Status Handling for Mails section, you can specify which statuses are to be reported. The first setting refers to the system being informed, and the second refers to a status mail being sent to the sender.
       5.      In the Logging section, select Write Log only if you want additional information about the actual processing of the alerts. This information is logged using the standard application log and can be viewed in transaction SLG1 (object ALERT).
(Source: http://help.sap.com/saphelp_nw04/helpdata/en/9c/34193cb4f5131de10000000a11405a/frameset.htm)
Hope this helps
Cheers
Manish

Need to Capture porReqLineId from ShoppingCartPG dynamically

Hi,
My Requirement
From the Shopping Cart Page in iProcurement I have to link a custom form for each line where the users will be able to enter some additional information and based on the information some validations will be done after which the data will be stored in a custom table.
What needs to be done and what I have done till now
I have extended the Controller of the Shopping Cart Page. Created a Submit Button and added the button dynamically to each line of Shopping Cart. Set a fireActionEvent to the button. So when the user clicks on the button it should open a new custom page with the Requisition Line ID as a parameter.
My Problem
I am unable to capture the Requisition Line ID.
I have tried the following step
1. Created a Extended Controller by extending the ShoppingCartCO
2. In processRequest created a Submit Button named it as "Additional Info" and assigned it to the Table. So it will show a Button in the result table of the Shopping Cart.
3. Assigned a Fire Action for Submit Button in processRequest using setFireActionForSubmit method. So when the "Additional Info" button is clicked it raises the event set in Fire Action.
4. In processFormRequest method of the extended CO handled the event by
if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM))).
In this i tried to capture the porReqLineId which is a formParameter using the following
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
5. Then I am personalizing the ShoppingCartPG and assigning the new extended controller to the page.
6. So for the time being I need to capture the porReqLineId and pass it to the new custom page as a parameter. But this is not happening and when i click on "Additional Info" button it doesnt provide me the porReqLineId.
My Whole Code is pasted below
===================================================================
package xx.oracle.apps.icx.custom.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
import oracle.apps.icx.por.common.webui.ClientUtil;
import oracle.apps.icx.por.req.webui.ShoppingCartCO;
public class XXBBShoppingCartExtend14CO extends ShoppingCartCO {
public XXBBShoppingCartExtend14CO() {
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
super.processRequest(paramOAPageContext, paramOAWebBean);
OATableBean otbRN=(OATableBean)paramOAWebBean.findIndexedChildRecursive("ItemTableRN");
OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
oasb.setID("addnInfo");
oasb.setUINodeName("addnInfo");
oasb.setText("Additional Info");
otbRN.addIndexedChild(oasb);
oasb.setFireActionForSubmit("addnInfoEvent",null,null,false);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
OAApplicationModule localOAApplicationModule = paramOAPageContext.getApplicationModule(paramOAWebBean);
String strEvent= paramOAPageContext.getParameter(EVENT_PARAM) ;
String str = paramOAPageContext.getParameter("event");
if ("deleteLine".equals(str))
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
if ("addnInfoEvent".equals(paramOAPageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
Number localNumber = 0;
try {
localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "porReqLineId"));
catch (Exception e) {e.printStackTrace();}
String outmsg="Line ID : " + localNumber + ":" + str + ":" + strEvent;
throw new OAException(outmsg,OAException.INFORMATION);
===================================================================
Here I also tried to modify the Oracle defined event of "deleteLine" by just capturing and printing the Req Line ID. This is happening in the case of "deleteLine" event but not in the case of "addnInfoEvent" event.
Please help me on this.
Thanks in advance.
Regards,
Rohit Subudhi
Edited by: 929000 on May 8, 2012 12:42 AM
Edited by: 929000 on May 8, 2012 1:22 AM

Hi,
I have used the following in processRequest
String pageName = paramOAPageContext.getRootRegionCode();
Hashtable params = new Hashtable (1);
params.put ("param1", pageName);
Hashtable paramsWithBinds = new Hashtable(1);
paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL(oasb, *"${oa.encrypt.current.RequisitionLineId}"));*
oasb.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);

Reg: Need to capture cost / energy consumption in process order

Dear Friends,
I need your valuable advices for one of the following
I have a scenario where for one of the process , we are generating Energy(heat) in in-house b y burning coal.
We are manufacturing steel Pellets , and it is continuous process at the end of the process these steel pellets are heated upto 1200DegC in furnace,
and for this we are generating energy in in-house by burning Coal on the other side.Now i need to capture this energy cost in my process order. And also i need to have shift wise energy consumption report.
So let me know how can i achieve this..?
Can we achieve by defining is as an extra activity type..? if yes , please let me know how and also necesary formula to achieve this.

1. Define New Std Value in your std value key. Say E0001
2. Now Ask Costing person to Create New Activity Type say ENG01
3. Now Decide how you want to calculate your Energy consumption will it based on you Order qty or It will based on the Machine run time.
4 Now give the std values in Routing as per Operation qty or Machine Run time
5. If is is based on Based on Operation Qty The formula will be
ENG01 = (Order Qty x Std Value of Energy)/ Operational Qty.
6. If it is Based on Machine run say 24 hr will burn 1000 joule
Then formula will be =
Machine run x Std value of Energy as in Routing.
Take help of your Costing guy to arrive at the Formula.

Need to capture RWB alerts to CCMS

Similar Messages

Maybe you are looking for