Need to change data on recovery partition

Hi, I am using T500 with Vista Business 32bit. I found out that I can switch to Vista Business 64bit using the same license key. Is there any program that I can change the recovery partition with? I would like to replace Vista 32bit with Lenovo soft for new 64bit version. I tried to ask on our czech forum, searching lenovo pages and asking lenovo czech tech support, but no response.            Thanks Jakub

Was verified that was no exit to do what we need, but the problem was related with a note for the company country.
Thanks.

Similar Messages

  • Need to change data in an idoc

    Is there any possibility to change data of a segment without generating another idoc?, when i save data in we05 it generates another idoc, and i don´t want to.
    Thanks in advance
    Regards

    Hi,
    As far as know you can do this only in an user exit for the idoc.
    Find some user exits in the processing code of the idoc which you are using.
    In that write the code to modify the data before the idoc gets posted.
    If you try to use WE19 to change data of an existing idoc and post it then it will always create a new idoc.
    Hope it was useful.
    Thanks,
    Sandeep.

  • WHY DO I NEED TO CHANGE DATA PLAN IN ORDER TO GET A NEW PHONE?

    WHY DO I NEED TO CHANGE PLAN IN ORDER TO GET A NEW PHONE FOR A CHEAPER PRICE ?

    You do not like the answer that is different then you being wrong. Everyone can think things about anything, but it is a black and white issue. To get a new cheaper phone, then you would have to change your plan.
    <<Personal comments removed to comply with Verizon Wireless Terms of Service >>

  • Using Frame API for C, Need to change Data size for a TX Object

    I need to Transmit different messages to the same ArbitrationID address. The Transmited messages have variable lengths. Can I call ncConfig on an object to change the NC_ATTR_CAN_DATA_LENGTH even after the call to ncOpenObject. Or do I have to Close the object and reopen it after the call to ncConfig?
    Thanks!

    Hello Genesis,
    your second assumption is right. You do have to close, reconfigure and reopen the object in order to change the data length.
    As long as you're using the CAN Object in the 'Transmit Data by Call' mode only, you might want to consider using the Network Interface for transmitting. When you use the Network Interface, you can change the ArbitrationID for each write call.
    -B2k

  • I Need to change Date Format in BEx report

    Hi Experts,
    i Need display with required values with following symbols in BEx report # and Date format change as per client requirement. Without any VB Code.
    Let me know solution for this.
    By
    ANR

    My actual requirement,
    by default date format display in BEx Reports MM/DD/YYYY fomat, but i want change DD/MM/YYYY format without using any VB macro and also instead of displaying "#"  i need display "0" (Zero).
    let me know the solution.
    by
    ANR
    Anybody ....
    Message was edited by: ANR

  • Need to change Date field Zone from IST to UST

    Guys,
    I have to develop a application in which there is a Date field. This date is coming from Application Server i.e. R3 and is in India, terefore it's IST. Now when this application is run from US, it should give the UST.
    Means Actually I want to change the Date from IST to UST.
    Can somebody please reply with the coding that needs to be done.
    Thanks,
    Nikesh Shah

    Hi,
    Refer the following link
    Date format
    Java Webdynpro Date Format
    I hope it helps.
    Regards,
    Rohit

  • Need to recover data from Bootcamp partition

    Hi, all,
    I recently sent my Macbook Pro in for repairs after a crash (Windows partition not recognized, after working well for a year), and they replaced the logic board and HD, the former of which was dead and the latter of which "wasn't running very well". I got the HD back, and have been trying to get data off it; the problem is, most of my data was stored on my Windows bootcamp partition, which I can now see - but not access.
    This is the info I got off it, since Disk Utility still recognizes it.
    Mount Point : /Volumes/BOOTCAMP
    Capacity : 116.7 GB (125,294,346,240 Bytes)
    Format : Windows NT File System (NTFS)
    Available : 26.6 GB (28,521,467,904 Bytes)
    Used : 90.1 GB (96,772,874,240 Bytes)
    Number of Files : 138,674
    Owners Enabled : No
    Number of Folders : 0
    I feel as if there should be a way to recover data from the drive, since it obviously still...exists and is recognized. But using "verify" in Disk Utility returns a "verify volume failed: invalid request", and I can't otherwise see any files, since there's apparently 0 folders.
    Does anyone have any recommendations for data recovery software that works in Mac? I can't just run Windows from an external drive because the HD with the Bootcamp on it is Mac-formatted.
    Many thanks.

    Probably the best option for attempting to recover files is attaching the hdd to a> USB Adapter and plug it into a usb port an another machine. If the hdd has not failed it should show up as a drive and can be browsed on the other machine to copy files over.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Need to Change data in PDF form field with importData operation

    This should be simple, right?
    I have a PDF form that is submitted.  At a certain step in the process, I need to modify the value of one field from within the process.  I am using a PDF document in the default formData document variable.  To do this, I am using the exportData operation from the FormDataIntegration service to get XML.  I then use the setValue service to modify one node of the XML.  Finally, I use the importData operation from the FormDataIntegration service to import the modified data back into the PDF.
    Problem is that I am getting an error.  It says: ALC-FDI-001-304: Only XDP data is supported with XFA forms.
    Any advice?  Jasmin, Jayan, Paul, anyone?

    My theory is that when you export the data you do get xdp data.
    Now  when you modify the node you don't have the right xPath to that node and if that's the case, it might be overwriting the entire xml.
    This is causing the xml not to be in xdp data format and you get the error.
    Could you post the data you get from the exportData operation and then the xml you try to use by the importData?
    Jasmin

  • Need to change Date/Time stamp on jpeg file

    I combine images into panoramas using PTGUI. The problem is that the output image file is date stamped as the time that I created the image. I really want the date/time stamp to be the same as the images that go into the panorama. I cannot find a way in LR to change this.
    Lee

    > By the way, Victoria, should you be promoting your url here? It belongs in your profile. It's in the forum rules somewhere and others have been picked up on it before.
    >
    > Joe
    Oh, thanks Joe, I'll change that then. I did go looking for forum
    rules, but couldn't find any!
    Victoria

  • Need to change date farmate

    hi all,
    my upload program is taking only US date formate..I want change it will be take any formate...can u help me nay one....

    You can not change user master record data(which are stored in a standard table usr01).But before uploading you convert dae in a single form by using your own code which would be like this.
    Read current date format of the System(USR01-DATFM)(There are 6 formats)
    case type-1.
       date+6(2) = dd.
       date+4(2) = mm
      date +0(4) = yyyy.
    case type-2. and  so on upto 6 types.
    Here dd is w_date+0(2) for type 1
    Here dd is w_date+2(2) for type 2 and 3    
    Here dd is w_date+6(2) for type 4,5,6
    similarly for mm and yyyy also.

  • Need to change CONTRACT End date using Bapi BAPI_CUSTOMERCONTRACT_CHANGE

    Hi,
    I need to change date of a contract and for the same I am using Bapi "BAPI_CUSTOMERCONTRACT_CHANGE".
    I am passing the following Parameters to the BAPI.
    SALESDOCUMENT  -- Have passed the Contract Number in this.
    CONTRACT_HEADER_IN -- Have passed the values of the following fields ::
    COLLECT_NO -- Sales Document number
    Sales_Org  -- Sales Organization
    Distribution Channes -- Dist. Channel
    Division -- Division
    CT_VALID_T -- New date which I want as the contract end date.
    CONTRACT_HEADER_INX -- Following values have been paased in this Structure.
    UPDATEFLAG -- 'U'.
    CT_VALID_T -- 'X'.
    Now when I run the BAPI with these inputs I get the output as ' Field 'GUEEN' cannot be copied, because it is not ready for input'.This is a information message. But the changes are not reflected in the contract. I have done the commit work after BAPI.
    When I changes the value for CT_VALID_T flag from 'X' to 'U' the message mentioned above does not come but the end result is same and changes are not reflected in the contract.
    I would be really helpful to you if get any kind of helf to know ehy the output is not coming.
    Thanks a Lot for your kind help!!!!
    Regards,
    Lalit Kabra

    Hi Lalit,
    The value for CT_VALID_T flag has to be 'X' in the CONTRACT_HEADER_INX structure.
    In this case, you receive an informative message "Field 'GUEEN' cannot be copied, because it is not ready for input'"
    That is the problem. You cannot change this field because your functional team has this field as "not ready for input" in change mode.
    Can you change this field in transaction VA42? If you can't modify it in dialog, you can't modify it with BAPI.
    Regards,

  • Hp 4530s recovery partition

    I just bought a Hp Probook 4530s. On it were 3 partitions. Two of which were C: and hp recovery.
    I wanted to make more partitions so I shrunk the size of C with a software and and made a new partition. But somehow this changed the hp recovery partition from primary to logical.
    So, my question is that is that partition still usuable for recovery or changing it to logical has rendered it useless?
    And my second question is, if I use Hp recovery partition to restore my pc, will all my partitons and data be erased or only system file will be restored?
    Thanks to anyone who can answer these questions!
    This question was solved.
    View Solution.

    Hi:
    You can use the same product key only on your PC as many times as you need to.
    You can not use it on another PC.
    I am not 100% sure about what happens if you were to install W7 32 bit, use the key and then decide to install W7 64 bit and use the key. But below is my unqualified opinion...
    The activation process takes a hardware inventory of your PC and assigns points to various components.
    The operating system is not taken into account.
    If you were to switch bit versions of the operating system, I am pretty sure that the key would work again because it is checking hardware.
    So, I think it will work, but according to Microsoft, even though the key is good for either a 32 or 64 bit installation, you should be using the key to activate the version of W7 that originally came with your notebook.
    While no one would ever know the difference, it is illegal to do otherwise.
    Paul

  • Where could I find, live disk or other to restore HDD recovery partition?

    Hello I have a A300 1M9 system unit.
    I need to restore the HDD recovery partition, I had to change the harddrive disk, cause he is dead.
    Is there any link where I could download the files? ISO img or other program able to create a new recovery partition on a new disk?
    This computer is not under warranty, because he has more than 4 years.
    Thank you for all the support you could give me
    Seb
    ps : second question : wich kind of hard drive disk could I buy for that model ? Wich connector, 2 1/2 hdd and sata? Ide? I dont know.
    Message was edited by: Seaone

    Hi and welcome in our community.
    This is user-to-user forum so here you will not get answer from Toshiba technicians.
    I have a bit experience with Toshiba laptops. Meanwhile I use my third Toshiba machine. ;)
    I have A300 to and must say it is very good piece of hardware. So here is answer to your question:
    Recovery image cannot be downloaded. You got your notebook with preinstalled Vista and preinstalled Toshiba recovery disc creator tool. With this tool you could create recovery disc. This disc can be used in situation when recovery partition is damaged or you want to use new HDD.
    So I presume you dont have it. Original recovery disc can be ordered on https://backupmedia.toshiba.eu/landing.aspx
    My advice: I use Win7 32bit on my A300 and it works perfectly and very stabile. Dont waste your time trying to obtain original recovery disc. Install own Win7 version. F you need some assistance I can help you with installation and configuration.

  • BAPI to change data at operation level

    Hi,
    I have this requirement:
    I need to change data at operation level, more particularly Person No (PERNR) by using a BAPI.
    Is there any BAPI - in which I can pass the basic data (say Order data and Operation data) and change the PERNR for it.
    The name of the BAPI and its usage will help.
    Ankur

    Hello,
    Assuming you are talking about maintenance or service orders, you can use BAPI_ALM_ORDER_MAINTAIN. See function module documentation from SE37. The structure BAPI_ALM_ORDER_OPERATION contains PERS_NO field.
    -Paul
    Please use Enterprise Asset Management (EAM) forum for PM/CS specific topics
    Enterprise Asset Management (SAP EAM)

  • Retrieving latest changed date UDATE for Vendor.

    Hi All,
    I have a requirement to retrieve latest changed date UDATE field from CDHDR table based on company code wise??.
    As the vendor can be same for different company codes, I need to retrieve the company code wise latest changed date of vendor.
    Hope am clear.
    Currently am doing this 
    SELECT objectclas objectid tcode udate
        FROM cdhdr INTO  CORRESPONDING FIELDS OF TABLE it_cdhdr
        FOR ALL ENTRIES IN it_lfa2
        WHERE objectclas = 'KRED' AND
              objectid   = it_lfa2-objectid
        AND   change_ind = 'U'.
    SORT it_cdhdr BY objectid udate  DESCENDING.
    Its giving me the latest changed date. But I need latest changed date -company code wise?
    Any help is highly appreciated.
    Thanks & regards
    Himayat.

    Hi,
    Use function module CHANGEDOCUMENT_READ to get the details of CDHDR as well as CDPOS data. Records of table CDPOS where TABNAME = 'LFB1' will have the details related to changes in company-specific data.  Structure EDITPOS of above function module will give you detail information.
    Regards
    Vinod

Maybe you are looking for