Need to change snmp string for a solaris server

Hi Everyone ,
i am new to solaris and i need to change a snmp string for solaris server and we need to add this server into the monitoring system.
Please tell me the PKG which need to installed in the client ( solaris box ) .
As of now , i can find these PKGs installed in the machine .
# pkginfo -i |grep -i snmp
system SUNWjsnmp Java SNMP API
system SUNWmibii Solstice Enterprise Agents 1.0.3 SN MP daemon
Do i need to install any package for setting the snmp string and please tell me the configuration file where i need to
change the snmp string file ?
Regards
Chenthil

Hi Bhanu,
I am fine, thanks. Hope you are fine too.
will this step not required
$sqlplus apps/appspass
SQL>exec fnd_conc_clone.setup_clean
before running autoconfig?If you have the latest AutoConfig patch applied, then I believe it is not required. However, it should be OK to run this command to purge FND_NODES table before running AutoConfig.
Regards,
Hussein

Similar Messages

I need to change my password for outgoing mail server but it won't let me

I Need to change my password for outgoing mail server on iPad 2 but it won't let me change it. I can't send out mail

I assume that you mean that the setting is grayed out and that is what "it won't let me" means. Have you tried selecting another SMTP server of you have another one available in the settings?

HT5821 I forget my answers and i need to change the email for rest answers

I forget my answers and i need to change the email for rest answers

You cannot and need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
Changing the rescue email address requires supplying two of the answers. They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(110891)

HT1918 Hi, I need to change the country for my Apple store account but this message appears "You have a store credit balance; you must spend your balance before you can change stores." but my credit is 1.58$ only and I couldn't buy any app with this amo

Hi,
I need to change the country for my Apple store account but this message appears "You have a store credit balance; you must spend your balance before you can change stores." but my credit is 1.58$ only and I couldn't buy any app with this amount! Any way how to fix that and I don't have a problem if I lose this 1.58 $?

If you can't spend it then you can try contacting iTunes support and ask if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

Mail/Preferences/Accounts
Use the - and + signs to delete or add your new Accounts
see
http://support.apple.com/kb/PH4928
Mac 101
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

I forgot the answers to my security questions which I need to change my password for my apple id. What do i do?

I forgot the answers to my security questions which I need to change my password for my apple id. What do i do?

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
(90791)

Steps to change IP address for SAP B1 server

Dear Guru
My company is going to change the IP address of SAP B1 server, because I am very new in this area, so pls clarify for me the following doubt
1. May I change the IP address with the SAP B1 is running?
2. If I need to stop the B1 services, how can I stop it? Stop at windows service level? or is there any console for me to stop the service like SAP R3?
3. Do I need to stop the MSSQL service as well?
4. Do I need to reboot the server before I startup the SAP B1 service?
Regards
Guodong

Dear Guodong,
Just assuming you have only one question since that is the forum rule.
To change IP address for SAP B1 server, you need to Stop and restart the server to prevent the potential problem. B1 is not the same as R/3, you have to stop all B1 related services.
Thanks,
Gordon

How to change connection string for a form created with b1de

Hi all
i've created a form using the Code Generator tool ob B1DE
My question is how can i set the connection string to a different server and database. doing so after the creation wizard has finished?

Hi,
Why do you need to change the connection string? What are you calling "connection string for a form"???
The only connection string I now about is the one used to connect to the UI API... and this one is fixed for all apps in debug mode and given as parameter when your addon is registered in B1.
The connection string is filled in the code of your generated addon.
Please go to the main class of your addon, in the main method you have the following code where the connection string is filled either with the command line parameters (release mode) or with the fixed value given by SAP. This code doesn't need to be changed...
        public static void Main()
            int retCode = 0;
            string connStr = "";
            bool diRequired = true;
            // CHANGE ADDON IDENTIFIER BEFORE RELEASING TO CUSTOMER (Solution Identifier)
            string addOnIdentifierStr = "";
            if ((System.Environment.GetCommandLineArgs().Length == 1)) {
                connStr = B1Connections.connStr;
            else {
                connStr = System.Environment.GetCommandLineArgs().GetValue(1).ToString();
            try {
                // INIT CONNECTIONS
                retCode = B1Connections.Init(connStr, addOnIdentifierStr, diRequired);
Regards
Trinidad.

TS3899 comcast told me I needed to change my password for my comcast account. I changed my password on my DESKTOP computer. Now on my iPad, when I click on email, everything is received and read perfectly but I cannot send an email. The user name or

On my desktop computer, comcast requested that due to a problem, I needed to change my comcast PASSWORD. I did so and everything was fine. That evening I was working on my iPad and was reading all my emails that I had received during the day and tried to respond. It came back and told me the username or password was not correct. I immediately went to SETTINGS on my iPad and changed the mail password. I have been working on this for two days and cannot SEND emails. Otherwise, everything works perfect. Everything I try to send gets put in my DRAFT file with a red triangle in the corner. HELP???????

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Using Frame API for C, Need to change Data size for a TX Object

I need to Transmit different messages to the same ArbitrationID address. The Transmited messages have variable lengths. Can I call ncConfig on an object to change the NC_ATTR_CAN_DATA_LENGTH even after the call to ncOpenObject. Or do I have to Close the object and reopen it after the call to ncConfig?
Thanks!

Hello Genesis,
your second assumption is right. You do have to close, reconfigure and reopen the object in order to change the data length.
As long as you're using the CAN Object in the 'Transmit Data by Call' mode only, you might want to consider using the Network Interface for transmitting. When you use the Network Interface, you can change the ArbitrationID for each write call.
-B2k

Need to change default email for iCal and Discussions

I have a dual problem tonight. my first problem is trying to reset my default email address in iCal to my new email address since we changed ISP. I have read that I need to change the default in MAIL, but everything there is with my new email address (@Telus). My old email was (@Shaw). When I set up a meeting on iCal and send it out to others, the reply email is @shaw and I can't seem to find how to change it to @telus. No one can reply with confirmation since it is going to a dead letter box.
However, in trying to find something here on the discussions I noticed that my apple account to log into discussions still has my @shaw address, but for the life of me I can not find the account settings that will let me change my email on my user name/profile. I won't get a notice of a solution of either of these questions through the automatic reply as it will go to dead email land. I don't want to have to close this user name and my history and start all over again. Yet the edit profile only lets me reset my biography information, not my email account.
Since I won't get a reply automatically, please CC your post here to mrbarth @ telus.net as well. Thanks,

On Mac OS X, 10.7.2: After several days of trying all the suggestions, I went to the Apple store. It took 2 Geniuses two hours to figure out that invitiations were being sent from the email that I have set as primary with Apple. It didn't matter that the account wasn't even listed on My Card in Address book nor was it even anywhere in mail preferences. What mattered was that I had that email as primary. So, I went to
https://appleid.apple.com/
and changed the Primary Email address. Now all my invites come from that address.
Supposedly iTunes and everything else will come along...

Need to change screen colours for each system in the landscape

hi ,
we are in need of having different themes for different systems in the landscape .
that is
if i click development system , the screen with 'theme1'
if i click quality system system , the screen with 'theme2'
if i click production system system , the screen with 'theme3'
how to configure this colour setting in accord to the system for all the users

Hi Susin,
You would do this by changing the parameter sapgui/theme for each system. It uses the Tradeshow theme by default as of Web AS 6.40. As long as the SAPgui itself is set to "System Dependant" then it should work fine.
Regards,
Nelis

Need to change security email for iTunes account.

Hello, I need to change the security email for my iTunes account because I forgot the answers to the security questions. However the only way for me to get ahold of iTunes is through calling, which I can not do. Is there any other way to contact them?

Click here and use the form. Tell the people there that you can't call and see what they say.
(102593)

Need to change payment info for student CC membership, but it says I have a "free" membership when I go to change it?

I recently changed my card info, and need to change it on my Creative Cloud membership. When I go to Manage Account, it tells me I have a free membership. I don't understand why, as the Adobe Applications Manager tells me I have 4 days left to update my payment info, and all of my CC apps are still working. What can I do to resolve this problem? Should I just pay for a new membership, or will that cause conflict with my account? (I have a student membership, by the way!)

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Anyway, this is an open forum, not Adobe support... the links I have that may help are below
Change/Verify Account https://forums.adobe.com/thread/1465499
-Credit card https://helpx.adobe.com/utilities/credit-card.html

Need to change mac address for msi 9211

Hello All.
I need to change my msi 9211 server mac address to be same as some other server for some licensing issues, this server doesnt have a floppy so i guess i ll need to boot it via cd or something.
what software is required?
anyone can be help, will be appreciated/rewarded
thanks
pls reply to [email protected]

Hi,
Please contact MSI or Local supplier direct on this issue.
This is an END USER forum run by END USERS, we do not have access to MSI licencing policies..........
Del

Need to change snmp string for a solaris server

Similar Messages

Maybe you are looking for