Need to change the buffering of a tbale

Hi ,
Im trying with transaction SE13 to change the buffering of a table (usr02) , but when i change the buffering the system tell me that the value is not permited , this happen with all the tables that have the data class 'APPL0 , APPL1 y APPL2' ,
In other system that have the same version , kernel and data base , the system let us to change the buffering .
The system is open in SCC4 and SE06 .
Best reggards on advance .

Hi
In a production system the application data cannot be buferred. Thats because of the synchronizaton of different application servers happen after a delay.
In a system other than Production it might allow this kind of a setting.
Please assign points if helpful.
Deb

Similar Messages

  • Need help changing the default Save Path

    Hello,
    We are implementing SAP, and will be using Citrix as the source for the GUI.  One of our requirnments are, that we need to change the default "Save Path" that users save documents too.   By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
    We found this note on SDN (see below) - however, it does not explain how to change or add this registry value?  Is this done in the GUI options, or in regedit?  If in reg-edit, where abouts in the tree does it go?
    Thanks guys, and any help would be greatly appriciated.
    Richard
    (As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
    By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
    In this doc:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

    Hi,
    "Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
    [HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
    to configure the behavior of the security module.
    Note: For 64 bit operating systems please use the following registry key
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
    to configure the behavior of the security module."
    You can use regedit for installing this values.
    Best Regards,
    Aleh

  • I need help changing the account number my daughter uses for payment for her apps and itunes, etc. can anyone talk me through this.

    hi ,
    im just a mom, not very computer savy.....however, I need to change the payment method my daughter uses to purchase things on her ipad due to the fact that the current one is expiring. ie: for such things like songs and games, etc.
    I would appreciate any help as how to do so.
    THanks

    On a computer's iTunes you should be able to edit the payment info by going into the Store > View Account menu option (if you are not logged into the account that your daughter is using then Store > Sign menu option to log out of the currently logged in account ; that will then change to a Store > Sign In option so that you can log into her account) and log into the account (enter the account's password and click View Account on the popup)
    And on the account's details page there should be a payment link.
    If you are doing it on your iPad then tap on your id in Settings > iTunes & App Store (if not logged into her account then log out of your account via the popup that you get and then log in with her account) and tap on 'View Apple ID' on the popup and log into the account  - that should also give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918

  • My ISP tells me I need to I need to change the port to send/receive e-mails, but I can't remember my Mail password to add an account. How can I proceed without the password?

    My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.

    your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.

  • What program do I need to change the resolution of a photo?

    What program do I need to change the resolution of a photo that is currently a low-res .jpg? I previously had photoshop, but it did not transfer to my new Mac Lion - and it is too expensive to repurchase. Curious if there is there an alternative option? I cannot open hi-res files anymore, and would love a solution. Thanks!

    Take a look at Pixlemator in the App Store

  • Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

    hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
    Thanks for answer

    If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery.  Therefore you will lose everything that is not backed up.  If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

  • Need to change the date of joining of employee

    Hi All,
    I have gone through some threads similar to this subject an also tried to do changes from PA41 but i am facing some problems during the procedure.
    We have transferred some employees to sap system with their original date of joining and payroll was run from some other date for those employees. So i need to change the date of joining of those employees.
    For example : Below is the line items of one employee from table infotype 0.
    End date Start date Changed on
    22.02.2009 19.02.2007 19.02.2009
    31.03.2009 23.02.2009 19.02.2009
    31.12.2009 01.04.2009 14.10.2009
    31.12.9999 01.01.2010 21.01.2010
    Payroll was run from Feb-09 onwards and i want put date of joining for this employee as 23.02.2009.
    I want to know which date i need to change??...When i am trying to change the first start date i.e. 19.02.2007 to my desired start date, but it is not allowing me to do that as end date is smaller.
    Please tell me how would i change the joining date of employee as 23.02.2009 ?.
    Thanks.

    Try this
    22.02.2009 19.02.2007
    31.03.2009 23.02.2009
    31.12.2009 01.04.2009
    31.12.9999 01.01.2010   take this record form PA30  IT0000 Over View (Shif +  F8)  Copy that record and change the Start date
    as 2302.2010  so  another record will be created
    22.02.2010    01.01.2010
    31.12.9999    23.02.2010
    Just try and let me know

  • I just bought an iPhone 5 and I need to change the iCloud account so that I am not sharing the same account with my husbands iPhone. How do I do this?

    I just got a new iPhone 5 and I need to change the iCloud account because I am now sharing it with my husband and I can not restore or back up my phone because of it. I need help!

    here is a link that will help you: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId

  • How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    Hi Sara!
    Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
    Thanks for your quick answer.
    Best Regards
    Per-Olof Egli                                         Logga Egli C.I.S
    Managing Director
    Egli C.I.S. Consulting
    Lapphundsgränd 43
    SE-128 62 SKÖNDAL
    Sweden/Швеция
    Phone:         +46 708 23 03 53
    <http://www.eglicisconsulting.se/> www.eglicisconsulting.se
    <mailto:[email protected]> [email protected]
    Skype: eglipo
    Från: Sara.Forsberg 
    Skickat: den 10 september 2014 22:11
    Till: P-o Egli
    Ämne:  How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg>  n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

  • Can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • I am running Itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Also, I lost the last 2 purchases. Can I download them again without a charge?

    I am running itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Suggestions?
    Also, I lost the last 2 purchases when I backed up after a hard drive crash.  Can I download them again without a charge? Newton

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.

  • I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new  fields recognized. What can I do to redo my documen

    I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new  fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?

    You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
    You master the "static" content..
    You keep this authoring file and have a backup of this file.
    You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
    The authoring file  and output PDF (with form fields) gives you "rev 00".
    Now, you must change something in the "static" content.
    Open the authoring file and save as to a new version (e.g., "wordfile_v00"  becomes "wordfile_v01).
    Output this to "pdffile_v01".
    Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
    Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
    This replaces the "static" PDF page content and does not affect the form fields on the page.
    (you may have to adjust position of form fields)
    Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
    Be well...

  • I need to change the sum of a column's total with javascript.

    Hi,
    The HTML output of a SUM column is as follows:
    <td align="center" headers="COST" class="t2data"><b> 827.49</b></td>
    I need to change the sum total with javascript.
    The initial loading of the page SUMs the DB values correctly. Then onchange JS for a couple of factors may change one items COST.
    When that one item's COST changes I need to reSUM the total with JS.
    I was trying the following.. I don't know JS to well.
         var tds = document.getElementsByTagName('td');
         for (var xtd in tds) {
         //alert('Here:'+xtd.headers);
         if (xtd.headers=="COST") {
         // you found the element, do what you need
         alert(xtd.innerHTML);
         After inserting the above code into my javascript is popups up
         my alert, "Here:undefined"
         and never hits the alert(xtd.innerHTML);

    Hi Ya'll,
    I got the following working. See any problems?
    headers=="COST" actually showed up in each row of the whole column, including the SUM. So it ended up being great so I could sum it in the JS.
    I had to change the column type to NUMBER from VARCHAR2 for the initial SUM to work, so adding any formating to the SQL was not good. It looks pretty much what Andy has though... I found a slight hesitation it it though.. I have to work out a bug that prints the old total instead of the first.
    var ltotal =0;
    var tds = document.getElementsByTagName('td');
    for (var k=0; k<tds.length; k++) {
    if (tds[k].headers=="COST") {
    var inputObjs= tds[k].getElementsByTagName('input');
    if(inputObjs.length>0) {
    for (var j=0;j<inputObjs.length;j++) {
    ltotal+= parseFloat(inputObjs[j].value);
    //alert(inputObjs[j].value);
    //alert(ltotal);
    }else{
    tds[k].innerHTML=ltotal;
    Message was edited by:
    changed i to k to avoid the italics
    Bill Carlisle

  • I need to change the height of a Captivate playbar using Flash Pro

    I need to change the height of a playbar in Adobe Captivate.  I have Flash Pro. I am very new to Flash Pro. I read.. "To change the height of the playbar, adjust the height of pbcBk_mc movie clip inside cpPlaybar symbol in Library".  The problem is I CAN'T FIND pbcBk_mc anywhere.  I see the cpPlaybar attrbute.  When I click on it and look at the timeline I am not seeing an attribute for pbcBk_mc or height.  Where in the world is it??

    You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
    You master the "static" content..
    You keep this authoring file and have a backup of this file.
    You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
    The authoring file  and output PDF (with form fields) gives you "rev 00".
    Now, you must change something in the "static" content.
    Open the authoring file and save as to a new version (e.g., "wordfile_v00"  becomes "wordfile_v01).
    Output this to "pdffile_v01".
    Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
    Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
    This replaces the "static" PDF page content and does not affect the form fields on the page.
    (you may have to adjust position of form fields)
    Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
    Be well...

  • Need to change the sender of the workflow email using SPD 2010

    Hi,
    I got a requirement. I've created a SharePoint Designer 2010 workflow which will trigger an email. The sender of that email is default. I need to change the sender of email to some user's email address like [email protected]
    Can this be possible using SPD 2010. Please suggest.
    Thanks,
    Kunal

    not out-of-the-box.
    you would need to find a third party add-on to send the email. The SPDActivities codeplex project includes some email options that include specifying a sender, but focus on attachments... not sure what would happen if there was no attachment.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

Maybe you are looking for