Need to change the Certificate in ACE that is using for HTTPS Management access

Dear Team,
Currently we are getting certificate cannot be trusted error in web browser while we are accessing the ACE through https. So we need to installed the new https certificate for https management connection to ACE for removing this error. We do not want to use the self signed certificate for https access to ACEmanagement. We have done the below configuration but there no luck, still its showing the previous self signed certificate in browser.
parameter-map type ssl MNGMT_SSL
cipher RSA_WITH_AES_128_CBC_SHA priority 2
ssl-proxy service PSERVICE_SERVER
key ACEKEY.key
cert ACECERT.cert
ssl advanced-options MNGMT_SSL
Kindly suggest how we can installed the certificate on ACE for only https management access.
Thanks in advance.
Regrads,
Ranjith

Ranjith,
You may want to see the details and recommendation relatedo to this situation and this bug:
CSCte42757
Jorge

Similar Messages

I just bought an iPhone 5 and I need to change the iCloud account so that I am not sharing the same account with my husbands iPhone. How do I do this?

I just got a new iPhone 5 and I need to change the iCloud account because I am now sharing it with my husband and I can not restore or back up my phone because of it. I need help!

here is a link that will help you: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId

I need to change the height of a Captivate playbar using Flash Pro

I need to change the height of a playbar in Adobe Captivate. I have Flash Pro. I am very new to Flash Pro. I read.. "To change the height of the playbar, adjust the height of pbcBk_mc movie clip inside cpPlaybar symbol in Library". The problem is I CAN'T FIND pbcBk_mc anywhere. I see the cpPlaybar attrbute. When I click on it and look at the timeline I am not seeing an attribute for pbcBk_mc or height. Where in the world is it??

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

I need to change the default email address that gets sent from Firefox.

When sending emails from an important web app (Highrise) for my business, it defaults to my home email, when my default in Outlook is clearly my work email. I believe this is the fault of Firefox, since every app (Highrise and Outlook) has my default as [email protected], but when sending an email it goes to [email protected] Any ideas?

Could you be more specific about the steps you are taking to change the Adobe ID? I was able to change one of my accounts to a .ca email address without issue. Also, information on Browser version and OS may be helpful. I am assuming that you are doing this in a Browser and not the FormsCentral AIR application, is this correct?
-Jeff Canepa

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

How do I change the original email address that was used to set up iCloud

I have just noticed that the email under system preferences for iCloud is an old one that does not exist anymore. How do I change this? Can you also tell me if I delete this account - will it affect what I have stored on the computer e.g. what is in my photos etc? I am a real novice when it comes to computers - so excuse my ignorance :-)
Thanks for any assistance.

You can change the (non-Apple) email address which forms your Apple ID to another one at http://appleid.apple.com. If you are going to do this you should follow this procedure to avoid problems:
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in (give it time).
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

I need to change the page setup to an unusual size for label printing

Hello. I'm trying to print a label that is 2" wide x 1-1/2 high. Firefox defaults to 8-1/2" x 11" or A4 page size and I've been unable to figure out how to change the default size to 2" x 1-1/2".
I've cleared all the margins to zero and removed all header and footer information. But how do I change the size to 2" wide x 1-1/2" high?
When I print, it will print the label correctly. However, it spits out 11" of labels instead of stopping at 1-1/2"
The printer is set up to accept the size (it's a Zebra label printer), but Firefox appears to be sending a page size that is different.
Any help here would be most appreciated.
Thank you

Thanks for your answer. Instead of formatting through FireFox, I had to go in and format it via the printer. Duh! Feel stupid not doing this first. If any one else has this problem, I was able to set it up on the printer by going to Printers > Printer Properties > Printer Preferences and set it up. Good luck and thank you for your reply.

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

HT5621 I need to change the email address associated with Icloud. My provider has changed. I have looked at the directions to do this,but my old email is still coming up. How do I change the address to the correct e-mail?

I don't want to change my Apple ID, I just need to change the e-mail address that is attached to my icloud account. I changed the Apple ID to my new e-mail, but icloud still has the old address.

Did you get a resolution to this? I have the same problem.

TS4002 Need to change the account name (address)

How do you change the account name (address) that is used to sign on??

Go to appleid.apple.com and click on manage my apple id. You can change your primary address there.

When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

How to change the column order in OVS - NOT USING Enhancement Pack 1

Hi Guys,
we are currently using NWDS 7.1.
I cannot seem to chang the order of the columns when the OVS pops up. We have tried to change the order of the fileds of the custom SAP BAPI that is used for this OVS but no success.
Please advise on possible changes of the actual BAPI that might help, or things we can do Java side.
Kind Regards,
Christiaan

Hi Christiaan,
This can be done from Java side in itself.
This depends on the order in which you add attributes to the node in the context for ovs output.Recreate the context node of ovs output and add attributes one after the other in the same order you want it to appear in the ovs pop - up.That simple.
Hope this helps.
Regards,
Ashok

I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC device

You can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]]

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

See this thread:
http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx

How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

Need to change the Certificate in ACE that is using for HTTPS Management access

Similar Messages

Maybe you are looking for