Need to change the local change request to development class for Process Ch

Hello ,
I have created a Tranport request for Process chain but its saved as local change request .
Please suggest how to change that .
Thanks ,
Rahul

Hi
1.First delete the request which you collected the process chain as local object becuase you will not able to collect the process chian again.
2. Goto Tranport connector to collect the process chain again.
3. Select grouping option as necessary objects.
4. Drag and drop the process chain to the right hand side
5. After collecting the process chain, click on the package icon and give the package created for development class.
6. The system will ask for Transport request and save the PC in the Transport Request.
Hope it helps.
Regards
Sadeesh

Similar Messages

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

Changing the development class for 0CALMONTH

Hi we upgraded from BW3.5 to 7.0 and we are getting the same error from the thread : Unable to change development class because field is greyed out
Does anyone know how this problem was resolved.
Regards,
Brian
I am changing the development class for 0CALMONTH and for some reason I am not able to change the $TMP to ZBW because it is greyed out. I also noticed the Orginal system field is SAP and not our BWD name and the Orginal language is DE and not EN.
How would I change the development class for this IO? I am perplexed how this got to this status. When I collected the 0CALMONTH afterwards and listed the IOs belong to 0CALMONTH, I was able to change the development class. Why is this being greyed out?

Changing while signed on in DE did not work. - I also tried changing the person reponsible and get the following
Local private objects cannot be repaired
Message no. TR229
Diagnosis
Every user of the SAP System can access and change local private
objects using the ABAP/4 Development Workbench.
System Response
Setting the repair flag is rejected.

How to change the development class for a Layoutset

Hi Experts,
I have to Change the Development Class For a Layout which is under Local object now ($tmp) ,how to do it.
after Changing to Development Class new ,while transportation any issues will come ?
Thanks in Advance,
Regards,
Hitu.

goto SE03 and change the development class, no transport issues will come...
or
execute report RSWBO052.
Add FORM in blank field under R3TR DTEL, mark field and put your sapscript name, then execute. In Tree double click over sapscript name, and change development class $TMP.
Regards,
SaiRam

Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

Hello,
I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server. I imported a previous version successfully. The error I'm getting doesn't make a lot of sense to me, here it is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't generate files.
Possible reasons are:
1. The output file(s) might be read-only.
Remove the read-only attribute and import the Web service again.
2. A proxy DLL that LabVIEW created under the same file path exists in memory.
Restart LabVIEW and import the Web service again.
I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck. Any help is greatly appreciated.
Thanks,
Al Rauch
Merck & Co., Inc.

Aaron,
I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem. Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that. Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
Thanks,
Al

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
iPhoto is not the program to be doing that in and I don't think it even has that option.
So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal Goyal

Hi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism

Sm30 need create change request

hi experts:
               When I using SM30 to insert data, it needs me choose a change request, why? My table contain 'MANDT', so its not a cross-client table.
IN SCC4, its Automatic recording of changes & Changes to repository and cross-client Customizing allowed.

because your table is maintaince generatored   so that the changes are saved in the change Request ...
please see the   table attribute there it was   selected   as table maintaince allowed ..
reward points if it is usefull ...
Girish

Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
Kavita

Hi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu

Tracing a Change Request back to a Business Process

Good Day All;
The following is the process we use to create Issues and Change Requests.
Team Leader in SOLAR01
Creates the Issue against a Business Process
Creates Change Request
Assigns a Team member to the Change request.
Team member in CRMD_ORDER
Adds all documentation and informs Team leader the change request is complete.
Change request is sent to Release Management for approval.
I can not seem to find a way to relate the change request to the Business Process.
Why is this needed? If SOLAR02 to the u201CConfigu201D, how do they know what Business Process to use?
Thanks All
Regards
Don Newton

Hi,
Please check the TCODE SOLAR_EVAL. You can give project details under project header.
This should help you.
Feel free to revert back.
--Ragu

Change Request without development

Is there a way to process a Change Request without actually going through development? We have a situation where some development work will actually be done in another system not linked to Solution Manager, but yet we would like to be able to manage the change request for those changes in Solution Manager. (The idea being that all change requests will be managed in the one Solution Manager system.) As our current system is setup right now, we cannot get past the status of "In Development" without actually making any development changes.
Are there any suggestions on how to by-pass this?

Hi Rita,
actually i have the same problem and i think about how to connect non-sap-systems to the change request in sap solution manger.
How did you connect theses systems to the solution manager? What did you do in transaction smsy?
Did you create a project and a maintenance cycle for the change requests of your non-sap-system?
Is therer a possibility to report theses change requests?
Thanks in advance,
Jens

HT204053 need to change apple id on ipad for cloud like all my other emails has changed

need to change apple id on my ipad for cloud to match all my email sign in names that i have changed for apple store account and etc.

*Did you update your AppleID or did you create a new AppleID with a new emaill address?*
Thanks, Chris for helping me. I have posted this in 6 places online and no one will touch it!
Shitums. I can't recall, Chris. I was on the phone with Apple and they walked me through all of it. They changed my email/ID, to my new one, then I went into itunes and changed it. Then I went to settings on iPad and changed it and all was good! So we hung up.
Then I went to update all my apps and up pops the OLD ID. BUT if you go into settings the new one is present as is on iTunes.:( I have also synced twice and backed up, thinking that would tell the iPad update thingy the new ID.
*Go to the app store, click on Featured at the bottom, scroll all the way down, click on Account then sign out and sign in.*
I will do this now!
Don't forget me!
Okay. I'm on it. This doesn't sound like something I have tried in the last 24 hours.

Need to change word docx to pdf for windows background

I want to change word docx to pdf for windows background

Hi Larry,
I'd like to assist!
It looks like you created your monthly PDF Pack subscription a little while ago? It can take several hours to be ready to use. Are you able to login?
Here's a tip to get you started once the subscription is ready for use:
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
1. Select "Combine Files" from right pane
2. Click "Select Files" button
3. Select your files to combine
4. Enter a name for combined PDF file
5. Click "Combine" button
6. Click "Download" button in the progress bar to download the combined file to your computer.
Let me know if this helps!
Looking forward to hearing back from you.
Regards, Stacy

Need help understanding the local caching of jnlp when creating it via jsp

I'm trying to deploy an app via Web Start. I have occasions when I need to pass arguments, so I'm using JSP to create the JNLP and optionally write arguments.
I need some help in figuring out how to cover my different use cases with as few different jnlps as possible and am confused about the local cacheing logic.
Use 1
Initial install: I pass an init=yes url param which writes a preferences file <argument> to be passed to my app. I don't want this argument cached in my jnlp, as this will overwrite the user's preferences on subsequent launches.
Use 2
Subsequent offline launches: no url params passed.
Use 3
Launch via html link (in a CMS): passes a file=<filename> url param which creates a file <argument> for my app to open. Again, I don't want this argument cached, otherwise launching from, say, the desktop shortcut will reopen this file.
Can anyone explain how best to cover these three use cases?
TIA!

Did you solve this cache problem? I have a similar issue where I don't want it to use the arguments over again...

Catch-22: need to assign a local variable within an anonymous class

static boolean showMessage(Window parent, String button0, String button1)
    throws HeadlessException {
          final Window w = new Window(parent);
          Panel p = new Panel(new GridBagLayout());
          final Button b[] = new Button[]{new Button(button0), (button1 != null) ? new Button(button1) : (Button)null};
          boolean rval[]; //tristate: null, true, false
          w.setSize(100, 50);
          w.setVisible(true);
          //add b[0
          gbc.fill = GridBagConstraints.HORIZONTAL;
          gbc.gridx = 0;
          gbc.gridy = 3;
          p.add(b[0], gbc);
          //add b[1]
          if (button1 != null) {
               gbc.fill = GridBagConstraints.HORIZONTAL;
               gbc.gridx = 1;
               gbc.gridy = 3;
               p.add(b[1], gbc);
          w.add(p);
          w.pack();
        w.setVisible(true);
        //actionListener for button 0
          b[0].addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent e) {
                         if (e.getSource() == b[0]) {
                              w.setVisible(false);
                              rval = new boolean[1];
                              rval[0] = true;
          //actionListener for button 1
          if (button1 != null) {
               b[1].addActionListener(new ActionListener() {
                         public void actionPerformed(ActionEvent e) {
                              if (e.getSource() == b[1]) {
                                   w.setVisible(false);
                                   rval = new boolean[1];
                                   rval[0] = false;
        while (true) {
             try {
                  if (rval[0] == true || rval[0] == false) //should trigger NullPointerException
                       return rval[0];
             } catch (NullPointerException e) { }
     }catch-22 is at
rval = new boolean[1];
rval = false;javac whines: "local variable rval is accessed from within inner class; needs to be declared final"
How do I assign to rval if it's declared final?
Or at the very least, how do I get rid of this error (by all means, hack fixes are okay; this is not C/C++, I don't have to use sanity checks)?
I'm trying to make a messagebox in java without using JOptionPane and I'm trying to encapsulate it in one method.
And I'm far too lazy to make a JNI wrapper for GTK.

dcminter wrote:
How do I assign to rval if it's declared final?You don't and you can't. You're not allowed to assign to the local variable of the outer class for extremely good reasons, so forget about trying.
Or at the very least, how do I get rid of this errorIf you don't want the side effect, then just use an inner class variable or a local variable.
If you want the side effect then use a named class and provide it with a getter and setter.
Finally, in this specific case because you're using an array object reference, you could probably just initialise the array object in the outer class. I.e.
// Outer class
final boolean[] rval = new boolean[1];
// Anonymous Inner class
rval[0] = true; // No need to intialize the array.
I declared it as an array so that it would be a tristate boolean (null, true, false) such that accessing it before initialization from the actionPerformed would trigger a NullPointerException.
Flowchart:
is button pressed? <-> no
|
V
Yes->set and return
Is there a way to accomplish this without creating a tribool class?

Need to change the local change request to development class for Process Ch

Similar Messages

Maybe you are looking for