Need to change the name of a GP process instance at runtime.
Is there a way to change the name of a GP process instance at runtime? I would like to change the name of the process instance to include the employee's name who initiated the process. This way when the process owner or overseer displays thier list of processes from the GP Runtime Work Center, they can tell who initiated each process.
Does anyone know how to do this?
Hi Karen,
If the users are invoking the Process from Web Dynpro or some other application using GP API, then you can try the followigI.
You can try using the startProcess() method of the IGPRuntimeManager object. It has multiple paramaters of which two(second and third) are for the userProvidedName and userProvidedDescription. You can set any name and description while invoking the GP process and the name and description should appear in the Runtime for the owners/overseers/administrators in hte list of process instances. You can add the name of the Employee while setting that name and description.
help.sap.com link for the info on this:
http://help.sap.com/saphelp_nw70/helpdata/en/43/fcdf77fc6510b3e10000000a11466f/frameset.htm
Regards,
Ajay
Similar Messages
-
I have the jetpack wifi and someone told me I need to change the name of it to "FBI Surveillance Van so that people would not try to tap onto it. How do I accomplish this?
Changing the SSID is a good idea, but I do not suggest changing it to something so troll enticing as "FBI Surveillance Van". A SSID like that is only going to draw attention to you and your network and challenge malicious users to target you. I advise not putting a target on your back and stick to a custom but not well known SSID.
I normally suggest broadcasting an SSID of something a little less confrontational. Something like combining your favorite color with your favorite sports team.
All jetpacks are a little different but they should all have a way to sign in and complete configuration changes. If you connect to your Jetpack and look up the IP Address of your Default Gateway you will know the IP of the Jetpack. Plug in the IP Address of the Jetpack into a web browser and sign in with the admin password. Review the security options that are available until you find a SSID or broadcast name or network name field.
While you are at it you should also make sure you have a custom WiFi password configured with WPA2 security. Custom WiFI passwords are going to be much more helpful than a creative SSID at keeping malicious users off your network. Rule of thumb for WiFi passwords is the longer the better.
A good tool to evaluate your WiFi password is here (shoot for at least a few years):
www.howsecureismypassword.net
Let us know if you want any other security best practices or tips. -
HT1420 Hi I need to change the name of a new device added in my account...
Hi I need to change the name of a new device added in my account...
HELP PLEASEYou can rename a device directly on it via Settings > General > About, or when connected to your computer's iTunes : http://support.apple.com/kb/HT3965
You might also be albe to edit the name of a device on your support profile : https://supportprofile.apple.com/ -
I need to change the name of Schema in the Insert command by using variable
Hi
I need to write a code to populate 450 schemas having same table names and also specify the columns needed to be inserted. for that i am trying to make the Schema Name a variable and put the whole statement in a loop to change the name of the Schema. its not working can any one guide me in this..Thae sample of my insert statement is
INSERT INTO A01.tablename
In this the "A" is constant and 01 is being changed to 02...450..
ThanksNot sure to completely understand your need, but assuming that column names and values to be inserted are the same for all schemas, here a short example :
SQL> desc a001.test
Name Null? Type
A NUMBER
B VARCHAR2(10)
SQL> desc a002.test
Name Null? Type
A NUMBER
B VARCHAR2(10)
SQL> desc a003.test
Name Null? Type
A NUMBER
B VARCHAR2(10)
SQL> declare
2 i number;
3 str varchar2(100);
4 begin
5 for i in 1..3 loop
6 str := 'insert into a'||lpad(i,3,'0')||'.test(a,b) values(1,'||chr(39)||'ABC'||chr(39)||')';
7 execute immediate (str);
8 end loop;
9 commit;
10* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select * from a001.test;
A B
1 ABC
SQL> select * from a002.test;
A B
1 ABC
SQL> select * from a003.test;
A B
1 ABC
SQL> -
I need to change the name of my phone
when setting up your iPhone in iTunes you select a name for your device. How do you change the name if you made a naming mistake or just don't like what you originally selected?
Select it in the iTunes source list, click on its name, and type a new name.
(62190) -
My boss wants me to take adobe off my computer so two other coworkers can have it instead. It's also under my name and need to change it to her name. Is this possible?
You would sign OUT of your Cloud account to deactivate on your existing computer... changing an account requires Adobe
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
I need to change the name of my institution in iTunes U.
I recently signed my K12 school up for iTunes U. The name of the school is King's College however when Apple granted me access to the site manger page I see that the name of my institition is King's Collegebzeu. Does anyone know how to change this?
ThanksThis community is mainly for intended for consumers of iTunes U content rather than producers.
I will ask asked the hosts to move this thread to iTunes U Public Site Manager where there is more chance of a knowledgeable answer, but I suspect part of the reason is that there are other institutions with the same name who already have a presence on the site.
You may find this document useful: Using iTunes U Public Site Manager.
tt2 -
Changing the name of my podcast
So I am making some changed to my podcast and need to change the name to reflect that. I am hoping that I will not have to lose all my subscribers. I have changed the name and all the info in the .xml file and it will still be linked to the same feedburner url....but iTunes search still has it under the old name. Is there a way to change it with iTunes??
thanksYou will find that all these URLs work:
http://itunes.apple.com/ca/podcast/id464589031
http://itunes.apple.com/ca/podcast/experience/id464589031
http://itunes.apple.com/ca/podcast/fred_bloggs/id464589031
in other words it doesn't matter what you put in the URL between the penultimate and last slashes; and if you get the URL from the Store page you get
http://itunes.apple.com/ca/podcast/experience/id464589031
whhichever variant of the URL you use. -
Changing the name of the System where WAS is installed
Hi,
I need to change the name of the machine where SAP WAS is installed. It also has a Portal & KM in it.
Will the machine name change affect the WAS/Portal in any way?
If so, what are the changes I have to do to make it work?
Regards,
PradeepHello Pradeep,
The procedure of changing the hostname of a WAS 6.40 is described in note 757692. Please pay attention to the warning at the beginning of the note.
Kind Regards
Vyara -
HT204216 how do you change the name of your iMac you setup when first cut on
need to change the name i assigned my imac when first cut on.
thanks. I starred it for you. I wonder why the first phone put my name in there and this one didn't. Everthing I did was the same.
Further:
I changed it in the itunes left column. Does that name not carry over to iTunes-Preferences-Devices??
Message was edited by: powerbook1701 -
Change the name of TargetGroup label
hi experts,
In component Seged_tg/eltargetgrouplitem I need to change the name of the label "TargetGroup" which comes right above the table view of targetgroup list.
But I am unable to trace the place ,where it is wriiten,since there is no overview page as such.
pls help
Regards
AnuHi Anu,
since this is no overview page, the label is directly set in the configTable tag in the html page
Its the attribute CL_SEGED_TG_ELTARGETGROU2_IMPL->HEADER_TEXT.
Its set in CL_SEGED_TG_ELTARGETGROU2_IMPL->DO_PREPARE_OUTPUT.
There it is read as OTR text CRM_UIU_MKTSEG_TG/TGED_TITLE_ITEMLIST..
I'm not sure if you can change OTR texts without modification.
Hope that helps
--klaus -
How could I change the name of Short Name?
I have some trouble on name creation on 10.4. I am a computer admin in my company. Everytime we bought new Mac, I will give a Short Name to the computer which is a part of new system setting. My difficulity is, I need to change the name frequently when the machine swap to a new user. How should I change the Short Name instead of reinstall the system?
Thanks a lot for your help!
FelixTo change an account's short name, log in from an administrator account and then open the NetInfo Manager application in the /Applications/Utilities/ folder. Change the old name to the new name in the admin group, as well as that user account's name and home properties; don't alter or delete any other accounts, groups, or properties. Next, open the /Users/ folder in the Finder and rename that account's home folder so that it has the new short name. Log out and back in.
(11684) -
What is the simplest way to change the name of your home directory?
I am not ashamed to say that I am not the least bit intelligent when it comes to macs. I came from PC, I'm learning, here. But I need to change the name of my Home directory and everything I've found online so far has either not worked (double clicking, or clicking twice but not quite double-clicking... um...okay), or described using the root user, which sounds sort of terrifying. Is there an easier way, or should I try to go by some detailed intructions and go for it?
kurrykurry wrote:
... Is there an easier way,
Yes.
Apple Support Communities contributor Pondini found an astonishingly simple way to accomplish what you seek. etresoft distilled that information into the following User Tip:
Changing user account short name
It is a far better method than Apple's support article on the subject, which I will not bother linking here because it's outdated and cumbersome. -
Hi BW Experts
i need to change the name one of the attribute . right now this name is dispalying like sort name i need to change to old employee id in query level . can any one suggest how to change the attribute name .
Regards
SivarajuHi,
Thank you very much for your replies . i already done same what you suggested.
Regards
Sivaraju -
Change the name of the pdfs generated during Bursting
Hi experts,
Good morning.
I need a help on report bursting. I am bursting a report with desination as Email. Everything works fine. I need to change the name of the attachement(pdf) is it possible.
Is there any setting where I set the report name as I wish. For example ' Statement <<Customer ID>>.pdf, where Customer ID will be from my XML data.
Now, the report name are like xmlp1234545_IA900A_11.pdf etc.,
Thanks in Advance
Thank & Regards
RameshHi Vetsrini,
Thanks for your reply.
I am using Email as a channel for bursting. There is no parameter for output filename while you use EMAIL.
Is my understanding correct?
Query used
select distinct
MEM_NUM KEY,
'New Template' TEMPLATE,
'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE,
'PDF' OUTPUT_FORMAT,
'EMAIL' DEL_CHANNEL,
'[email protected]' PARAMETER1,
'' PARAMETER2,
'[email protected]'PARAMETER3,
'Welcome Kit' PARAMETER4,
'Hi Please find attached your Letter.' PARAMETER5,
'true' PARAMETER6,
'[email protected]' PARAMETER7
from S_LOY_MEMBER
Thanks & Regards
Ramesh
Edited by: user6714549 on May 19, 2009 9:52 PM
Maybe you are looking for
-
Trackpad woes. [Solved]
Hello, After setting up my Xorg and installing the proprietary ATI drivers, I have come to realize my laptop trackpad does not function at all. I have a USB mouse that when plugged in works fine, however for some reason or another the trackpad doesn
-
OWB 11.2.0.3 do not re-generate DDL on objects deploy
Hi all, I've added a 2nd target location/schema (after a successful deploy on 1st target location) to our OWB project and we got an error on executing the DDL script for the dimension objects. I checked the script and found that it still contains the
-
Change default length of highlight boxes?
Highlight boxes default to three seconds. On shorter slides where I still want a highlight, this stretches the slide length and disrupts my workflow with a few extra clicks. Is there any way to change the default length of highlights permanently?
-
Why Logic and not protools other than midi
why have users chosen Logic over protools...not a debate but just a little feedback, Thanks.
-
I had photoshop on my old computer, I have since gotten a new one. How do I re-download photoshop on it?