Need to change to a smaller size

Help! New user and I can't figure out how to change my (duplicate) pic to a smaller file size and also make certain it is a .jpg or .gif format. Thank-you

select the photos and export it (file menu ==> export) - there are several "size" parameters you can set during export including JPEG quality and maximum pixel dimensions
LN

Similar Messages

I need to change the Firefox browser size. It went from the default size...and now it's the full size of the screen with small letters. How do I repair such an issue?

Smaller letters and takes up the entire screen..how I change it back to a default size...back to 100%?

You may also need to reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Need of changing the default stack size permanently as reported by ulimit -

Hi All,
In order to install proper 11gr2 on solaris 10 I need to make change of stack size permanently.
My current ulimit -s is 8192 but according to the oracle 11g installation docs (Configure Shell Limits) they recommend you change the value reported by ulimit -s to be 32k (or 32768).
I can change this value usiing "ulimit -s 32768" but after reboot of sever this value alwayes change back to old value(8192).
I tried to do that in /etc/projects but not able to make this permanent, How to make stak size permanently in solaris 10.
I am on ...
Oracle Solaris 10 8/11 s10s_u10wos_17b SPARC

Hi;
I suggest please review:
http://serverfault.com/questions/21417/how-to-set-ulimits-in-solaris-10
It seems that parameter will lost after server reboot. SoThe above settings are not permanent and will be lost after the reboot of the server. To make the changes permanent you need to set this in the respective user profile file. (For ex : .bash_profile on linux)
Please review:
Connecting Using: sqlplus "/ as sysdba" Fails with ORA-12547 with Lower Ulimit Setting [ID 878375.1]
Regard
Helios

Need to change numerous bookmarks page sizes

Someone created numerous bookmarks and when you click on the bookmark the page size jumps to 200%, but the rest of the pages show as 100%. Is there a easy way to change the sizes of the bookmarks to 100%? The only option I can find is clicking on each bookmark, resizing to 100% and right clicking on the bookmark and seletcing "Select Destination".

There's no way to edit multiple bookmarks in this way in Acrobat. You will
need to use either an external tool or a plugin to change the zoom level
setting.

I need to change my image file size but keep the same pixels. Possible?

I'm trying to upload an image to a mobile ad platform (Adfonic) with the following requirements: Image dimensions 216 x 36 pixels; max file size 3.0 kb; file formats supported GIF, JPG, PNG. I figured out how to change the pixel size but now my file is too big. I have Photoshop CS4 Extended & Vista.
I changed the file resolution but then the pixel size changes. What can I do?
Thanks!

Save-As, JPEG offers you a quality slider. You trade quality for size. This still wouldn't give you what you needed?
You could try JPEG 2000, but beware, it's not as compatible with as many things, and it can look kind of weird, but boy does it compress...
-Noel

Change font and font size in a textedit

Hi,
I am using a textedit UI element in read only mode. its getting the value from context attribute. I need to change font and font size ( atleast the later) and make it bold.
how can this be done ?
plz help......
Thanks
Akash

Hi Thomas,
I saw from your response in the post above that you might be able to answer a question I have about the portal theme.
We are using several textedit elements in our portal, however the font size of text entered in those textedit fields is smaller than the standard global text in the portal. I have tried in vain to find the setting in the portal theme that controls textedit elements. Do you happen to know which one it is exactly?
Many thanks for any suggestions/help you might have
Paul.

Change the Default Page Size for WebI

Hello Experts,
We have requriement where we need to change the default page size and margins for WebI, I have change the page size in defaultconfig.xml but don't see any options for Margins, How do I change the default margins?
Any help or suggestion would be highlt appereciated.
Thanks,
Nishith

From what I am finding it doesn't seem to be possible in 3.x, I could be wrong and someone might chime in with a workaround but at least it was added in 4.0
-Dave

How to change predefine bar code size in smartform style

hi,
in smartstyles--character setting, when we define barcode, there is one bar code "BC_C128B" with width 9CM. May i know how to change it into smaller size. Thanks.
regards,
BK

Try this:
Go to SE73 transaction code
Look for the barcode you want.
Go to edit mode make a copy of this.
change the width and height to the one you want.
Attach this new barcode in the device type you are using in printer barcodes button in SE73
In the prefix - create a new printer control eg. SBP99
in the control sequence part:
eg.
BY2,3.0,80BCN,,N,N,N,N^FD>9
The 80 here corresponds to 1 cm height. This is in DPI and depends on the zebra label printer default.
Download ZPL II programming guide in Zebra website to give you more details on the commands to use.
Hope this helps.

Where can i find the resolution of a photo? I need to change it to 102

where can i find the resolution of a photo in iphoto? How can I change it to 102? I see is the pixel width and height, along with the mb/kb size for photo info; I need to change the resolution and size for submission.

Short answer: the dpi (or resolution) is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

What to do if my master page is too small for custom master page column, I need to change the papers

What to do if my master page is too small for custom master page column, I need to change the papersize from A4 to US letter size *

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

Can I change an Extra Large photo book to a smaller size once done?

Can I change an Extra Large photo book to a smaller size once done?

Sure - butyour text boxes may need work since being a different size may affect the view - to change duplicate the book just in case (select it and press command - D) and then go to themes and select the same theme in teh new size - closly verify the modified book and preview it -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Mavericks After Upgrading to 10.9.2 the font size in the address/seach bar has changed to be small.

After upgrading to Mavericks 10.9.2 the text in the address/seach bar on Safari is a lot smaller. This is not a screen resolution issue. The fonts in Finder are larger than they were before anoying fix for this would also be nice. It is also not a screen resolution issue.
I really do not know what Apple are doing with quality control with Mavericks. The 3 month GMAIL problems have not been fixed with this upgrade and you also have a lot of font size changes accross you whole machine, within mail, finder and safari.
Any help appreciated.
Mark
Message to Apple:
Mavericks reminds me of all the old problems I had with Windows before I moved to Mac. Prior to Mavericks upgrades would not change screen resolutions, Font sizes etc. The GMAIL issue has not been fixed.
It is inconceivable to me that you could release this product which does not support basic mail functionality for one of the largest email services on the internet ie. GMAIL and then take 3-4 months and still not fixed with the 10.9.2 upgrade. What are you guys doing. The loss of productivity for people is beyond comprehension.
Can we please get a fix for GMAIL in Mavericks that actually works.

avjebs wrote:
I got this e-mail from WD a few days ago:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
THIS is very disturbing news from WD.

I was using Firefox on a website and all of a sudden everything changed to such small font that I can hardly read it. Any suggestions as to how I can change the size of the font?Ray Fowler

While using Firefox the font size automatically changed to so small I can hardly read it. How do I change the font size in Mozilla Firefox?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Why does the character size keep changing to extreme small on the home page?

With the new Firefox downloaded the character type changes to extremely small print every time I go away from the home page. I then have to reset it to larger print. With old Firefox the print size remained as I set it all the time.

You didn't restore the device as new before you began using it. Do so now, and use your own Apple ID & password from now on.
Go to Settings > General > Reset > Erase All Content & Settings.
Then, in the Setup Assistant, use only your own information.

Converting HD footage....need to change pixel size??? I need help!

I have someone who shot an event for me and has edited it. He edits on a PC using Vegas. He shot the event in HD. (I haven't gone HD yet and really know nothing about it.)
The problem is getting his HD footage created in Vegas into my FCP. He sent me a test .m2t clip. Neither QT nor FCP would recognize it. I downloaded Streamclip to convert it, but although Streamclip recognized it, it would not open it. It said "Unsupported Format."
So now he has figured out how to export the footage as QT, but again he sent a test clip and it is letterboxed. He said I need to change the pixel size to 1.2121.
How in the world do I change the pixel size?????? I'm open to all suggestions here. Thanks....Nancy
FCP 5.1.4
QT 7.1.5

Squished 4:3 = anamorphic. If you set your sequence to anamorphic (checkbox in Sequence Settings), it should display your clips properly and not insist on rendering. As others have noted, the rest of the sequence settings need to match you clip properties to avoid rendering or RT. You can check those properties with a control-click on the clip in the browser. There is an item there for checking the clip's technical properties. Make your sequence settings match those clip properties.

Need to change to a smaller size

Similar Messages

Maybe you are looking for