Need To Change Write Speed in DVDSP

I have a buttload of blank DVD-Rs that will write only at 4X or below on my system. When I use any app that lets me change the speed to 4X or lower, they work fine. However, DVDSP always blows up when it gets to the write, and I am not smart enough to know how to throttle the write speed down. Any help would be appreciated.

If you save as a disk image from DVDSP, Toast should recognize that image and write accordingly. I'm not sure you need to do that "conversion" step you mention.
Quality is unaffected as none of your video compression is changed. The bits that make up your project are exactly the same.

Similar Messages

I am running my first time machine backup onto a Western Digital MyBook Live. It is taking forever. Is there antivirus software running in the background or any other settings I need to change to speed it up? Also I am on a wireless network.

I am running my first time machine backup onto a Western Digital MyBook Live. It is taking forever. Is there antivirus software running in the background or any other settings I need to change to speed it up? Also I am on a wireless network.

The initial Time Machine backup can certainly take a long time over wireless. Days, possibly. It's impossible for anyone here to be able to predict how long it will take, and wireless environmental conditions can change at any time.
Is there antivirus software running in the background
Only you can determine that. If you're using third party AV software, anything is possible.
NAS devices may not be compatible with Time Machine, regardless of what their manufacturers may claim. Even after the Time Machine backup completes, your backup may be unreliable. You may not discover that until you need to rely upon the backup for some reason, and corruption can occur months or years from now.
Time Machine supports the following backup configurations:
A locally mounted volume
Time Capsule
A volume resident on a USB hard disk connected directly to a Time Capsule or current production AirPort Extreme Base Station.
That's it. Any configuration other than the above list places you in an experimental category. If your backup fails, you're on your own.

Changing writting speed?

Hi All,
We have recently burned an Imovie project to idvd and for some reason it skips randomly on different dvd players. We changed to setting to best quality (instead of performance) but although it seemed a little better it still skipped. I just went out and bought some Apple DVD-R's as I read that might help. But before I burn I was hoping someone could tell me if there is a way to change the burn speed to a slower setting. I thought that might help. Thanks in advance for your help.
Thanks,
David
Imac Intel Core Duo
1GB Ram
2.0Ghz
idvd 6
250 GB HD

See my message reply at: http://discussions.apple.com/message.jspa?messageID=2320002#2320002

Final Cut Pro changing sound speed

Part of my job is making sure that final mixes sync with the appropriate video delivery of NTSC, PAL, or regular 24fps film speed. Lately I've discovered that when I sync final mixes that I know should be synced to 25 or 24 fps picture they suddenly become 29.97 and I need to change their speed to 99.9% for proper sync. I've checked my settings and they are the appropriate speeds (PAL, 24, etc..,) Does anyone know if Final Cut will automatically change the speed of your sound upon import?

If your audio track has something other than a 48 Khz sampling rate, it will just beep beep on playback until you render it. I never heard it fade out and then get louder though -- possibly because I know exactly why it's doing that and never listened long enough??
I guess you will either have to wait for someone that also uses that device to read your post or mail their support people directly.

Changing the speed of Ethernet Link of the PC to 10 or 100 MBPS

Hello,
I need to change Ethernet Speed of the PC programmatically that is change the Speed to either 10 or 100 mbps.
Is it possible, If yes , then please let me know the procedure.
Or atleast I should be able to read the PC Ethernet speed in LabVIEW.
Thanks
Solved!
Go to Solution.

You dont need .net 4.0 for this (.net 2.0 is good enough) or anything else installed.
I have attached a VI with the control.
PS: If you need to load .net 4.0 assemblies in to LabVIEW, you need to follow instructions in this link:
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Attachments:
network info.vi ‏7 KB

How do you change the dvd write speed in pre 11

can i change the dvd write speed i pre 11 and if so how thanks

Not in Premiere Elements.
You'll need to use Premiere Elements to burn the DVD files to a folder, and then use a program like the excellent, free ImgBurn to burn the VIDEO_TS folder to a disc at a slower speed.

I Can't seem to change the write speed when building a BluRay disc in encore

I burned a Bluray project on disc and the video freezes after about a minute on each chapter, someone reccomended changing the BD-R disc brand and burn with a slower write speed (2x or 4x) But when I'm in the build panel, the destination section where the write speed section is blank and appears greyed out, so I can't change it. Can somebody guide me in how to fix this?
I'm on encore CS5 running on a Mac 10.7.4.
The Burner is a 12x LaCie D2 Blu Ray burner. Any suggestions?

Hi Stan, thanks for the quick reply, I took your advice and did the build as an image and then burned the project at the recommended write speeds in Toast Titanium (10.0.9). The first burn was at 4x and the second was at 2x BD (an option in Toast) both speeds gave me the same result. It solved the issue with the freezing during disc playback, however, when I tried to navigate from chapter to chapter the disc, once again, freezes. Additionally, although it doesn't freeze during playback as with my previous burns, there's still slight skip at the same positions where there used to be a freeze.
I'd be content at this point with the slight skip, but it's been one issue after another with these BluRay authoring projects. This is my first project switching from FCP and I've burned 11 Bluray discs on this project and still don't have a deliverable project that I can give to my client. Not what I was expecting from Encore. Any help would be greatly appreciated.

I need to change stage.frameRate, but how to keep tween speed?

Hello. I am using Flash CS6.
Right now I am trying to keep fps of tween motion.
I mean, I made a button that speeds up and down stage.frameRate, if I click the button it does stage.frameRate +=1 or stage.frameRate -=1, but if stage framerate changes, it speeds up the tween animation too.Is there anyway to keep the speed of tween animation?
What I want to do is there are 2 movie clips, mcA and mcB, and mcA animation is dependent on stage.frameRate, if I click the forementioned button to change stage framerate, it also changes mcA framerate, but I don't want to change mcB framerate.There is a tween AS, it moves "mcB.x = 0" to "mcB.x = 100" in 10 frames with tween.I want to keep the pace of the tween animation.
Please give me your advice.

Use Actionscript to tween positions instead of using the timeline. Then you can base it on time rarther than frames. For starters, look into using the built-in Tween class. Once you get a flavor for using it, for better performance you can look into using third party tweening such as TweenLite.

XSAN Read & Write Speed Low

I have an XSAN Setup 2 Dual G5 integrated in an Xsan with a 2TB of Xserve with Silkworm 3200 Fiber Optic Switch I use the 2 Dual G5 as the controller. When I try to use the Blackmagic Disk Speed Test I get a reading of Disk Read 140.4MB/s Disk Write 100.2MB/s. Based on the forum it seems its a bit slow can anyone help me with this..
I don't have a Metadata Controller I just put all the 2TB pool into anydata option my stripe breadth is 256 blocks. Im just a beginner in Xsan and just try to run and test it having a small amount of knowldge with XSAN system.
Im using Raid 5 for my Xserve raid
Hope you could give me a great advise thanks..

There's no way to take an existing volume and "de-merge" it into separate metadata and data volumes. You'd also need to delete and re-create your RAID sets appropriately.
If your performance is acceptable, you can stay as-is. But long run, you may need to change it. There are a number of options explained in the book.
You can get it from Amazon for like $13.86:
http://www.amazon.com/exec/obidos/tg/detail/-/0321369009/qid=1125007259/sr=8-1/r ef=sr8_xs_ap_i1xgl14/103-6755976-2921461?v=glance&s=books&n=507846
Probably other places as well, but Amazon's pretty easy

Help! Am trying to change the speed of a film clip and am having probs

Hi there all, this is my first foray into Apple Supp Communities, so thanks in advance for your help:)
I have downloaded an 8min HD video from my new Panasonic camera into imovie. All good. Now for some reason when I click on the movie
it is halved in time - showing a much speeded-up visual, although the sound track is at the same old speed.
I have tried to find a way to slow it back down to normal speed to no avail.
I next checked tutorials and came across one showing how to double-click to use inspector to change speeds, reverse etc.
Excellent except when I double click, the film plays only.
I have checked this community site and came across what appeared to be my answer - to change imovie preferences ,
Followed the following instructions (see below) -thank you John, but alas, alak, I find when I go into library preferences, I do not find any file referring to
imovie, the closes I come to is the whole ilife file which doesn't open to any more options (ie does not give me imovie to choose or delete etc).
How frustrating!!!!
Can anyone please tell me how to locate the com.apple.iMovie8.plist file so that I can delete/update it?
I have purchased the computer without the original disks so don't know if that poses a problem if I delete something!
Thanks again,
Danielle
iMovie's preference file is in your user Library>Preferences folder and is named com.apple.iMovie8.plist - delete (trash) this file after closing iMovie. When next opened, iMovie will create a new file with the default settings. You may need to change some settings to suit your own preference.
There should be a Browser tab in iMovie's Preferences once this new file is created. In that tab is an item "Double-click to Edit/Play" - select Edit. Double-clicking a clip should now bring up the Inspector.
By skimming over a clip (not clicking) you should be able to see the gear icon at the beginning of the clip. Clicking this icon will cause a panel to appear, from which you can select various items, some of which will open the Inspector.
It's important that you locate and delete that preference file. As your Browser tab is missing, something is clearly amiss with that file.
John

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Help needed regarding change of system CLASSPATH

Hi All,
I need to change the system CLASSPATH using my java programe. I tried the following code but its not working though it returns the correct CLASSPATH, but unable to do the modification. All I need is to append a new jar file in the existing CLASSPATH..
code]
try{
          sysMap = System.getenv();
          }catch(Exception se1){
                    System.out.println("Exception in finding Environment properties");
          Set Keys = sysMap.keySet();
          Iterator It = Keys.iterator();
          while(It.hasNext()){
               String strNow =(String) It.next();
               if(strNow.contains("CLASSPATH")){
                    System.setProperty("CLASSPATH", ".;C:\\Calypso\\Software\\\\Release\\jars\\calypso.jar;C:\\Calypso\\Software\\Release\\build;C:\\Calypso\\Software\\Release\\build\\calypsofx;C:\\Calypso\\Software\\Release\\resources;C:\\Calypso\\Software\\Release;C:\\Calypso\\Software\\Release\\jars\\jconn2.jar;C:\\Calypso\\Software\\Release\\jars\\jaxb-1.0.4\\;C:\\Calypso\\Software\\Release\\jars\\javacup.jar;C:\\Calypso\\Software\\Release\\jars\\antlr.jar;C:\\Calypso\\Software\\Release\\jars\\ojdbc14.zip;C:\\Calypso\\Software\\Release\\jars\\web\\servlet.jar;C:\\Calypso\\Software\\Release\\jars\\web\\webserver.jar;C:\\Calypso\\Software\\Release\\jars\\ftp.jar;C:\\Calypso\\Software\\Release\\jars\\itext-1.02b.jar;C:\\Calypso\\Software\\Release\\jars\\Jama-1.0.1.jar;C:\\jdk1.5.0_10\\bin;C:\\Calypso\\Software\\Release\\webfx\\calypsoWebFXServer.jar;C:\\XXX.jar");
                    System.out.println("Classpath changed");
Any help will be appreciated.

Hi Kaj ,
Well I am in a situation where we need to extend a
existing system and we are providing the client with
a new jar file for every modification. Now all I need
is that our programe automatically add (infect
append) the jar file in the existing system
CLASSPATH, so that the client need not to add(append)
the new jar files all the time.
Can you provide any help??As others have said, use -cp as argument when you start your application. It's quite common that people write a script that adds all jars in a certain directory to the argument to -cp.
Kaj

How to change clip speed w/o moving all the other clips in a sequence?

when I have many clips in a sequence and try to change the speed of a clip (which changes the length) FCE automatically shifts all the following clips. is there a way to turn this feature off?

Not in FCE. FCP 7 has that feature.
Think about it; when you speed up a clip, the duration is shorter, therefore the clip is shorter. When you slow down a clip, the duration lengthens, therefore the clip is longer. How would FCE know that you don't want the clip to remain the same duration?
You'll need to trim the clip accordingly based on the amount of speed adjustment you want.
-DH

How to change the speed of a slideshow

How to change the speed of a slideshow

In my test, all I need do was right click the clip and make sure Frame Blend was not checked.

All of a sudden only 4x and 8 x write speeds are available when building DVD

I have been using Encore successfully for several months to burn my indie film onto DVD for grant proposals . I found if I used a 1x write speed my DVDs played on most DVD players and computers.
As of yesterday all of a sudden and for no reason (I made no chances to my computer that day) the only write speeds available to choose from when building a DVD were 4x and 8X and when I burn a DVD at these speeds it does not play well enough to watch.
I rebooted my computer and even tried restored my computer to the states it was in a few days ago but nothing worked...in terms of getting back the broader choice of write speeds.
I called adobe Technical support and they said that I would need to pay for support to fix the problem...does any one know how I can fix this without having to pay adobe lots of money for tech support
Kathleen

a) The drive's lifecycle counter has kicked in. If so, it would prevent non-optimal software-controlled modes and only allow burning at its native speeds to extend life expectancy.
b) Some other tool that accessed the disc drive and reset its config data.
c) Windows itself has for some reason initiated a new hardware detection and reset driver config.
In any case, it would seem that you will have to re-initialize manually. Remove the drive from your device manager and have Windows scan for new hardware. Do so with admin privileges. Windows should automatically re-install the required drivers, but with default settings. Also check this: http://support.microsoft.com/kb/314060. even though Encore doesn't give any error, the case listed under 1) may apply - if the driver is not installed correctly, it would report incorrect burn speeds.
Mylenium

I need to change my country

Hi,
I've had a trial of creative cloud and am looking to upgrade to a complete account, however when I go to pay it says my country is the UK however I am located in Australia. Please can you help with this?

I had a similar problem, and it was quite a challenge for Adobe. Their online systems, shall we say, have a few issues.
I had two Adobe IDs in different countries (one dated from Macromedia days and was set to US, the other was UK). I had some products registered on one, some on the other.
They couldn't change the country of either Adobe ID, but after a series of long on-line chat sessions and phone calls (It totalled over 5 hours - no kidding). They moved all the products to the UK ID.
I suggest you might have to do somthing similar. Create a new ID in Oz and get them to move products over. However, go talk to them, and expect it to take a long time.
One gotcha to be aware of: don't change the email associated with an account, or if you do, allow many days after before doing anything else. When I changed the email associated with and ID, it changed immediately as far as I was concerned, but the agents online were still getting the old email and account details on their systems for several days. It caused huge confusion. It appears some changes happen only in batches overnight - and not every night!
Edited to add: if you don't have any product registration info on the trial account ID, do you need to change the country? It might save you a lot of pain and grief just to create a new ID in Oz, and forget about the old one.
However, you can't create a new ID with the same email address as an existing one. If you want to use the same email address on a new ID, you'll still need another one temporarily. Change the UK ID to a new email address. Wait at least 24 hours. Create the Oz account with the original email (if that's what you want), which you should be able to do after a day or two. But as I say, it takes several days for changes like email address to trickle through Adobe's systems. The speed of light is rather slow in Adobe.

Need To Change Write Speed in DVDSP

Similar Messages

Maybe you are looking for