Need to close maintenance cycles to apply EhP1?

Hello,
We are planning to install EhP1 for SolMan, we are currently running SP17. I've looked through the install guide, but I am still not sure if we need to close all existing Maintenance Cycles and corrections before the upgrade, or if the existing cycles will not be affected.
Can anyone shed some light on this issue?
Thanks in advance,
Michele

We are using ChaRM in our SolMan production system to manage changes to our other SAP systems, so we have numerous maintenance cycles open and ZDCR corrections being created and worked on.
When EhP1 for Solman is installed in production, will it mess up any of these maintenance cycles or ZDCR corrections? Or will these continue to work? We don't want to stop our support for our other SAP systems for this enhancement pack.
Thanks,
Michele
P.S. - It's really hard to talk about SDCR/ZDCR corrections when their name is banned from the forums.

Similar Messages

Close Maintenance Cycle

Hi Team,
I am trying to close the maintenace cycle. Currently the phase of the maintenance cycle is "Being Completed". When i try to complete the cycle, i am getting below error.
Note: I am using Sol MAn EHP1, ST:SAPKITL433
Move to next maintenance phase rejected
Message no. SOCM_ACTION_LOG 026
Diagnosis
The next maintenance phase cannot start (see below).
System Response
The system terminated the action.
Procedure
Obtain the conditions required for the next maintenance phase.
Additional Information:
Messages from task list M000000070
Error RFC destination /TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance Cycle M000000070
No transport requests for the CTS project ZCLOSE_CLC
Your valuable input will be very much appreciated.
Thanks
PSK

hi
pls check the note
[933986-Phase transition not possible|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=933986]
this may help
jansi

Cannot Close Maintenance Cycle in CHARM

Hi,
I'm testing CHARM and I'm trying to set the Maintenance Cycle (SDMN) to "Complete", but it's giving me an error.
Error: "Move to Next Maintenance Phase Rejected"
I was able to go through all the maintenance phases successfully as part of my testing, but for some reason the system will not let me close the maintenance cycle.
How can I find the problem?

Hi,
Follow this note to 1134993.
This should solve your problem.
Feel free to revert back.
-=-Ragu

Not able to complete Maintenance Cycle in CHARM Maintenance Project

Hi,
While completing the CHARM Maintenance Project, getting following error:
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
Because of this error I am not able to complete the Maintenance Cycle, i.e. not able to change the status of Maintenance Cycle to 'Completed'
Regards
PK

hi PK
please refer the posiblities on
[cannot close maintenance cycle|Cannot Close Maintenance Cycle in CHARM;
jansi

SDTM Maintenance cycle - little help needed

Hi all
I am following the blogs of Dolores Correa (thank you for the blogs) and I have become a little stuck - I am hoping you can help me out.
I have created an SDTM (test message) during my Test Phase. In the blog there is a way to assign the project for the test phase (and therefore the MC) - I cannot find where to do this, how do I assign my test message to the correct maintenance cycle?
Many thanks
Marina

Perhaps I am thinking this is more complicated than it is .... if I only have 1 maintenance cycle does the test message get automatically assigned to that maintenance cycle? and only if I have multiple maintenance cycles do I have to assign a cycle??
I guess that there is also no way to have a test message associated with a particular change request - that would be helpful because then the developer would know what the test message is in relation to, but I can't see a way of connecting a SDTM to a SDMJ.
Any ideas or musings are welcome

Not able to closing the maintenance cycle of charm

Hi Team
I am not able to close the maintenance cycle of charm.
I had already tried with the phase utility report, I had checked my all authorizations and it is fine.
I had gone through most of SCN queries for same, current phase of project cycle is completed however. Not able see the any error logs in SLG1.
Regards
Harsh

Hi Rishav,
We had resolve the issue as now we are able to close the cycle successfully,
But new CTS project is not being generated, Any idea, should we need to check this with SAP again.
B R
Harsh

(My Labview built executable) has encountered a problem and needs to close.

All,
I've built a labview executable that interfaces with GPIB and the Texas Instruments EV2300 via USB.
The VI runs beautifully on the development machine, and I built the VI into an executable and it runs fine on the development machine. So I built an installer that installs the Labview 2010 runtime environment on the target computer. I ran the installer on a production line computer that I know can run GPIB and the EV2300, but when I try to start the executable I get an error that says "(your application) has encountered an error and needs to close."
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
I'm not doing anything weird with the file paths in my program, just creating paths from strings using the canned VI for converting strings to paths. In the course of the program, I read a few text files and write one.
Is there anything I need to know about how to build an application with an installer? I need to get this up and running so the test program can run on a production line.
Ro ma wa ichi ni chi ni shi te na ra zu
Solved!
Go to Solution.

RTSLVU wrote:
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
Sounds like a VISA problem. Download and install the latest VISA runtime on the target machine.
Ditto that! At least One of the installed drivers on the target does not have LabVIEW 2010 support. Check MAX and NI.com to resolve all the drivers on the target that have no support for 2010.
And yes, you may need to re-qualify the pre-existing exe's- if their code changes to use the new drivers If you are in a heavilly regulated industry. If so, It might be easier to build in an older LabVIEW version. Very sad- but it might even be simpler to incorporate the Unit Test Framework to handle regession testing of older code with newer drivers.
Worse- What if the exe's were built with a legacy version of LabVIEW that is no longer supported by the latest Drivers?
Time to start thinking of life cycle maintenance plans- with a 5 year upgrade required!
Jeff

Maintenance Cycle Questions

Hi,
We have in the process of exploring CHARM feature. I have few questions:
1) Is there any possibility to have more than maintenance cycle. The reason is if i have a procedure like requests in the cycle goes into production every 2 weeks and i know that a new development in a particular case going to take 4 weeks to complete then what is the purpose of putting in the cycle which is scheduled to go for production every 2 weeks.
2) Also i found that when i try to close cycle it is showing what are all still left over in the status of Created, In Development, Successfully Tested to move out of this cycle and gets automatically attached when next cycle is created. By doing this what is the actual purpose of having a cycle when something can be taken out , why can't we have more than 1 cycle and have long process one in second one and possible short ones in cycle 1 ?
3) Is there any way of removing a request from a cycle whenever we want ? The reason for this question is say if have a X request which went till quality and found an error which needs a new one to be created and if the new one goes to production as urgent corr, and if remaining all from the cycle goes to production then the bad one goes and invalidate the urgent correction one, then i have to put the urgent also again into PRD, why to do like this twice ?
Thanks
Murali.

Hi Avinash,
Thanks for your reply. I checked the IMG proj created for this maintenance pro. in the satellite system (both Maintenance project and IMG proj in satellite system is ZMAINT_12 and it isshowing in satellite system SPRO_ADMIN, how to make sure it is active ? Another working project ZMAINT also looks same like thisnew one ZMAINT_12 in terms of all columns values, so the new one should be active. Let me know any specific place i can see it is active or not apart from seeing in SPRO_ADMIN with status as In Process.
Regarding shipment route it looks ok.
Regarding checking system landscape check, it looks ok except this message:
Logical component ZECC is not used in project ZMAINT_12 but it is GREEN color status. (ofcourse same thing is there in another working project ZMAINT also).
One more thing to mention is Under the Change Request tab where we activate the change request management for that project, next to the button cProjects Project Assigned there is nothing in the working project ZMAINT, but in this new one ZMAINT_12 it is showing a value called NONE. (Basically ZMAINT_12 is copied from ZMAINT).
Thanks,
Murali.

Blackberry Desktop Software has encountered a problem and needs to close

When I try to open Blackberry Desktop the message I get is that Blackberry Desktop Software has encountered a problem and needs to close. I have a Blackberry Bold 9700 and as a result I cannot sync. Does this mean I need to uninstall and reinstall? If I reinstall will I lose the update that I have on my phone that has changed the interface? Will I have to reinstall that as well?
Thanks for any help or advice you can give me.

I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

I submitted this support request to NI on 8/12/2010.
When I compile my LV 8.6 app in LV2010 I get this error:
"LabVIEW 10.0 Development System has encountered a problem and needs to close. We are sorry for the inconvenience."
I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile. I then sent NI tech support "my code". The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
My LV 8.6 app compiles and runs great in LV 8.6. I don't want to be left behind with the newer upgrades and I want to move to LV2010. I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
I was told this will be looked @ in LV2010 SP1.
One note...back up your LV8.6 data before you move to LV2010. Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
I restored all of my LV8.6 code and I'm back working with LV8.6.
It's a tough call, do I stay in LV8.6 and get left behind?
Do I bite the bullet and try to debug this mess in LV2010?
I was told the compiler is completely different in LV2010. That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software. I can't afford to re-compile LV code every few years. Like most people, maintaining my Apps with customer's revisions, and modifications is enough work. I don't want more work!
I was told LV2010 SP1 would likely appear in May or June of 2011. I'd hate to break out my old Turbo Pascal apps again...but hey...they still work! My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution. But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
I found another Bug with LV2010...you are going to love this one!
There is a new "LV Update Service". Perfect! I like updating my LV software when new patches are available. When I click "update" the update spins over and over "Checking for New Version". I have let it run ALL day with no results...just sits and spins over and over.
OK, I know give NI a break! Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement. I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
Thanks,
Doug

For your update service problem
Unable to Update Current Version of NI Update Service
Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

Crw32.exe has encountered a problem and needs to close,pls help

When I try to use a crystal report version 10.0 to querry from two data source at same time, I got following error:
Crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience .
I have a 8.5 version crystal report and it works just fine.
The two data source are:
MS access2003 DB and Sage Mas90 DB.
I have tried on server 2003 and window XP. none of them works.
Any help is appreciated.
Jonathan

Reporting off 2 datasources should work in CR10.
I would suggest the following;
1) Check the version of CR10 and apply SP5 if necessary
2) Try using different connection methods, if you are using a native connection try odbc for example
Possible workarounds woulr be to use a main report > subreport
or
In Access create a linked table to Mas90

IW21 Retrieving the maintenance cycle text while creation of work order

Hi Experts,
My requirement is to display the maintenance cycle text on the print preview while creating a work order via transaction IW21.
Since the print preview is clicked before saving the work order, the data from the work order has not been updated in the database tables (AFVC, PLWP).
Hence, the maintenance cycle text will have to be accessed through a runtime structure.
The text has to be fetched in a subroutine program which is called from the SAPscript.
I tried accessing the global data while debugging. However, the maintenance cycle text does not seem to be present.
Please help.
Regards,
Anusha

It is inappropriate to produce a SAPScript prior to save, IMHO. What prevents the user from changing something after the print preview was done in this case?
At any rate, you'll find that some data values, like document numbers, etc., are not set until the user has saved the document. The document needs to be saved, and SAPScript generated at the end of that process.

Reports Builder has encountered a problem and needs to close.

Hi All,
The report builder in my system is behaving weirdly. If I open a report, which is having a normal browser output, it allowing me to see the data model, layout model and everything. And if I open a report, which is having a PDF output, it's not allowing me to open the Layout.
Here the output is in context of Oracle Applications front-end. And as I know it shouldn't be a problem with Report Builder.
It errors out with the following message.
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
And the error report contains the following message.
AppName: rwbld60.exe     AppVer: 3.0.0.0     ModName: mmc60.dll
ModVer: 0.0.0.0     Offset: 0000c533
Here is the version information:
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser     1.0.2.1.0     Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
I have tried reinstalling the software a minimum of 10 times, but no luck. At last I got my system formatted and tried. For the first time it worked for me, then I installed Forms Builder... then again I am getting the same problem even though I have different homes for Reports and Forms.
Is it problem with my system or the Operating System or the version of the Oracle Developer?
Can anyone please help me out?
Thanks in advance,
Lakshman.

I have been having a similar problem and do not know if this will apply to your situation but I found the following on Metalink.
Subject:      Reports Builder Crashes Opening the Paper Layout on Large Reports on XP/2003
     Doc ID:
Note:566304.1     Type:      PROBLEM
     Last Revision Date:      18-AUG-2008     Status:      PUBLISHED
In this Document
Symptoms
Changes
Cause
Solution
References
Applies to:
Oracle Reports Developer - Version: 10.1.2.0.2 to 10.1.2.3
Microsoft Windows XP
Microsoft Windows Server 2003
Symptoms
Oracle Reports Builder crashes opening the Paper Layout on some large reports but ONLY on the following platforms:
     Microsoft Windows XP Professional
     Microsoft Windows Server 2003
Reports Builder displays the below message and then crashes:
Reports Builder
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
[Send Error Report] [Don't Send]
--> click on [Don't Send] button and Report Builder disappears.
-and/or-
access violation in oranls10.dll
This problem does not reproduce on:
     Microsoft Windows 2000
The solutions in the below note do not work on v. 10.1.2.2.0 and 10.1.2.3.0:
Note 361206.1 Title: Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Changes
Upgraded to Oracle Report Builder v. 10.1.2.x.x from a previous release.
Cause
Bug 7014048 is fixed in one-off Patch 5335195 (Base Bug) but missed inclusion (ie. was not ported to) in latest Developer patchset v. 10.1.2.3.0
See also:
Bug 7014048 Abstract: REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Bug 5029530 Abstract: REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Solution
To implement the solution, please execute the following steps:
1. Download one-off Patch 5335195 for v. 10.1.2.0.2 to the XP/2003 box.
2. Back up existing uiw.dll for 10.1.2.3 880KB 10/10/2006 7:23PM --> uiw_orig_10.1.2.3.zip
3. In the %ORACLE_HOME%\bin directory, replace uiw.dll (880KB) with the uiw.dll (1,316KB) from
Patch 5335195 --> 1,316KB 7/24/06 11:12PM
4. Re-launch Report Builder 10.1.2.3.0 on XP/2003.
5. Open the <large report>.rdf.
6. Double-click on the Paper Layout icon.
7. The result should be: Successfully open the Paper Layout for <large report>.rdf.
References
Bug 5029530 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Bug 7014048 - REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Note 361206.1 - Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Patch 5335195 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL DUE TO ACCESS

BB Desktop Manager 4.7 has encountered a problem and needs to close.

When I restart my computer, some of the icons in the notification area are missing. The I get the standard "BB Desktop Manager 4.7 has encountered a problem and needs to close" error and my XP machine wants to send an error report to MS.

Please try the following steps:
-Delete the Intellisync folder.
     Close the desktop manager application.
     Disconnect the BB from the computer.
     Double Click on My Computer> Local Disk (C Drive>Documents and   Settings>(username)>Application Data>Research In Motion>
   Blackberry>Intellisync.
     Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
     Click the View Tab, then click on Show Hidden Files and Folders.
     Click Apply>Ok and continue through the remaining steps.
     Delete everything within the Intellisync folder.
     Launch desktop manager and attempt sync the device with the computer.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

IMP.EXE has encountered a problem and needs to close

Dear all,
I have a dmp file which need to import into the oracle9i database. The dmp file size which is 1.6GB. Im using the imp cmd to run the import. When importing half way, i encountered an error which is IMP.EXE has encountered a problem and needs to close . Pls advice
Thanks

Dear Dean,
Herewith the log file and print screen that the IMP.EXE hang issue occured while doing the imp.
http://yfrog.com/bfimpexehangoj
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
Warning: the objects were exported by SYSTEM, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
export server uses US7ASCII NCHAR character set (possible ncharset conversion)
IMP-00046: using FILESIZE value from export file of 2097152000
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "CNTRSTATUSUPDATETOCUST_SEQ" MINVALUE 1 MAXVALUE 99999999 I"
"NCREMENT BY 1 START WITH 159 CACHE 20 NOORDER CYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "GENMESSAGINGERRORID_SEQ" MINVALUE 1 MAXVALUE 99999999 INCR"
"EMENT BY 1 START WITH 22 CACHE 20 NOORDER CYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "S_AUDITTRAIL" MINVALUE 1 MAXVALUE 99999999 INCREMENT BY 1 "
"START WITH 5238868 CACHE 20 NOORDER CYCLE"
IMP-00015: following statement failed because the object already exists:
Thanks,
Rgs,
Oraclebb

Need to close maintenance cycles to apply EhP1?

Similar Messages

Maybe you are looking for