Need to configure ADSI adapter with siebel 8.0

Hi,
i need to configure ADSI adapter in siebel 8.0, i tried to do it , but after completing the configuration for ADSI adapter ,I am unable to see the login page of Callcenter application.
Any help on how to restore the setup and how to configure the ADSI adapter in Siebel8.0 ?? Thanks!

I've replied to this in the Install section of the forum...

Similar Messages

  • I need help configuring a connection with asdm 5.2 for asa

    Hi All
    I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
    When he tries to connect he gets the error
    Cant connect to MySql Server at "IP Address" (10060)
    He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
    trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
    Any help would be greatly appreciated

    Hi,
    I'm not a security specialist but here is how I had it set up at home:
    Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
    Hope this points you in the right direction.

  • Parameters need to configure Data Guard with Data Guard Broker

    Hi gurus,
    I'm following this guide http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf, but it isn't clarify what parameters we need to set to get the service up.
    I noticed that we can setting up for two ways, either Oracle Enterprise Manager or Data Guard Broker. Do we need to configure the same parameters to OEM and after to activate the DGMGRL?
    Can you help me?
    Thanks,
    Denis
    Brazil

    Hi mseberg,
    Thanks for your help.
    I want to adjust my listener.ora and tnsnames.ora files to access the rman like this guide https://sites.google.com/site/universodobraga/oracle/standby-11g.
    Follow its:
    * Primary*
    listener.ora
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS=
    (PROTOCOL=IPC)
    (KEY= TSA.WORLD)
    (ADDRESS=
    (PROTOCOL=IPC)
    (KEY= TSA)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru11)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SDU = 32768)
    (GLOBAL_DBNAME = primarydb_DGMGRL)
    (SERVICE_NAME = tsa)
    (SID_NAME = tsa)
    (ORACLE_HOME = /oracle/TSA/112_64)
    tnsnames.ora
    TSA_PRIMARY.WORLD=
    (DESCRIPTION =
    (SDU = 32768)
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru11)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = tsa)
    (GLOBAL_NAME = tsa.WORLD)
    (SERVICE_NAME = primarydb_DGMGRL)
    TSA_STANDBY.WORLD=
    (DESCRIPTION =
    (SDU = 32768)
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru10)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = tsa)
    (GLOBAL_NAME = tsa.WORLD)
    (SERVICE_NAME = standbydb_DGMGRL)
    - Standby
    listener.ora
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS=
    (PROTOCOL=IPC)
    (KEY= TSA.WORLD)
    (ADDRESS=
    (PROTOCOL=IPC)
    (KEY= TSA)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru10)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SDU = 32768)
    (GLOBAL_DBNAME = standbydb_DGMGRL)
    (SERVICE_NAME = tsa)
    (SID_NAME = tsa)
    (ORACLE_HOME = /oracle/TSA/112_64)
    tnsnames.ora
    TSA_PRIMARY.WORLD=
    (DESCRIPTION =
    (SDU = 32768)
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru11)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = tsa)
    (GLOBAL_NAME = tsa.WORLD)
    (SERVICE_NAME = primarydb_DGMGRL)
    TSA_STANDBY.WORLD=
    (DESCRIPTION =
    (SDU = 32768)
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = unbru10)
    (PORT = 1527)
    (CONNECT_DATA =
    (SID = tsa)
    (GLOBAL_NAME = tsa.WORLD)
    (SERVICE_NAME = standbydb_DGMGRL)
    When i tried to connect by RMAN:
    RMAN> connect target sys/manager@tns_primary.world
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    ORA-01031: insufficient privileges
    Environment
    Oracle 11.2.0.3
    Aix 6.1
    SAP Ecc
    Thanks very much,
    Denis
    Brazil

  • What else do I need to configure my wireless with AirPort Express?

    This is what I have. iMac PowerPC G4 (2.1) without Airport Card, AirPort Express and a couple of laptops with Airport capability. Is there any way to configure wireless for all computers with what I have?

    Would that be an AirPort card?
    If the clock speed of your iMac G4 is 700 or 800 MHz, it is ONLY compatible with the original 802.11b AirPort card. It is NOT compatible with the AirPort Extreme card.
    If the clock speed of your iMac G4 is 1 GHz or&greater, it is ONLY compatible with the AirPort Extreme card. It is NOT compatible with the original AirPort card.
    If you need the AirPort Extreme card, it is still made and sold by Apple.
    If you need the original AirPort card, Macsolutions.com seems to have some.

  • Need Help Configuring Membership Website with External Approval Process

    I am working on configuring a membership website for a group of scientist.  Here are the interesting requirements.  Any brainstorming would be helpful.
    1 - A prospective member applies online. Within the application the prospective member has to include a reference for previous work proving his qualifications and naming a reference to confirm the qualifications.  The prospective member has to include the reference's name and email address.   (Site visitor creats a new user-submitted webapp item, easy enough.)
    2 - The application needs to kick off a workflow to an external site visitor (someone who doesn't have a site login).  This reference needs to confirm of reject the prospective member's qualifications.
    3 - If the external site visitor approves the reference, then the membership director needs to be emailed of the approval.  This approval should then kickoff another approval process to ask the membership director for his approval.
    4 - If the external site visitor rejects the reference, then the membership directory needs to be emailed the rejection notification.  (If the reference rejects then there will be some sort of appeal process or ability to start over or submit a different reference.)
    5 - If the reference approves and the membership director approves, then the prospective member is notified and submitted an invoice to pay.  His memberhsip is not active until he pays.
    6 - Once the member pays, then he appears in the online directory.
    7 - The member will also be able to login and edit his profile as needed.
    That about sums it up.  Any ideas??
    THANKS!

    1. Do I need to connect the two base stations via an ethernet cable?
    OR
    Can I simply plug the second base station into a power outlet in any room, along with the external hard drive connected to it's USB port?
    Airport Utility would not even recognize the second base station unless it is using an ethernet LAN-to-LAN connection. (It would not recognize the second base station with WAN-to-LAN connection.)
    You basically have three choices here that will allow the second AEBSn to share the attached USB HDD:
    Wired: Interconnect the two AEBSns by Ethernet; reconfigure both base stations into a roaming network.
    Wireless: Configure both AEBSns for an extended network. Note: This is what Lowell Tuttman is referring to.
    Wireless: Configure the second AEBSn as its own wireless network. This would work but would require network clients to switch network to access the drive or access the Internet. Not really practical and not recommended.
    The following Apple Support link provides very detailed information on setting up either a roamng or extended network with multiple AirPorts.
    2. Since I don't really care about the second base station utilizing the internet connection, do I set it up in Airport Utility as "create a new wireless network"?
    This is the current setting and I have a steady green light. However, Time Machine does not recognize the disk.
    In the first choice I provided, the second AEBSn would be configured to both "Wireless Mode = Create a wireless network" and "Connection Sharing = Off (Bridge Mode)."

  • Help needed to configure WVC54GC cam with BEFW11S4 router:

    OK...I have to admit that I'm finally having to ask for help!  I'm handy with most computer problems, but i.p. addresses, port forwarding and dns stuff is kinda over my head.  I need someone to walk me through the steps.  I've got the camera setup to the point that I can view the image in the Linksys setup, but I want to be able to share it on the net.  I'm stumped with how to do this.  I'm told I need to forward ports on my router etc.  I've been into the router settings and there is no "gaming tab" as is suggested, but I can find port settings under advanced, although they look different. 
    I've also setup an account with DynDNS updater,as I'm told I'll need this to maintain a connection.  The settings in there are equally as daunting, so any help here would also be beer worthy....LOL!
    Any help would be MUCH appreciated!
    Cheers!

    Once you login to your Router setup Page.... on the Very Right Side you need to click on the Advance Tab  and then you need to click on the Forwarding Tab and Below you can Open the Ports for your Camera.

  • ATA 186 needs assistance configuring to work with SIP

    Hello. Just got ATA 186. I would like to use it as SIP FXS. I already have FXO with the POTS plugged in. I don't want o use the gateway or the gatekeeper. I would like to configure it to be IP dialing. II am running SIP image ATA030201SIP050616A.zup. Any help is greatly appreciated.
    George

    Hello, already replied in another thread, please do not open duplicates.

  • NEED HELP configuring wifi sync with iPhone4

    Ok, I've updated my iPhone4 to iOS 5 and I have the latest version of iTunes.  It looks as if wifi sync should be working fine, but when I go into options, my phone tells me that the phone will sync the next time that it's plugged in and "ComputerA" is available.  The problem is that I don't want it to sync with "Computer A", the phone was updated and synced and used exclusively with "Computer B"... "Computer A" is completely decomissioned with a toasted power supply and shouldn't even be part of the equation here...  but I'm not given the option of selecting any other computer for the wifi sync to look for.. everything is "greyed out" and cannot be edited... anyone else have this problem?  Anyone know how to fix this problem?

    You can try putting into the phone the fields you see in Outlook in the +Tools > Accounts+ window. Use the various buttons (Advanced, Edit) to dig down and see your Exchange server and username. The iPhone needs those when you try to set up an Exchange account on it. However, this info alone wasn't enough for my phone to "verify" the Exchange account. I eventually gave up.
    I believe I.T. must do something on its end to allow remote devices to tap into the particular user account. In my company they do this if you have a Blackberry but not for anything else.

  • Help needed to configure H-REAP with local switching

    Hi All,
    We are using following devices for campus Wi-fi.
    1. WLC - 4402
    2. AP (1131ag, 1042n) which support H-REAP.
    I want to configure HREAP central auth and local switching. I have enabled from local to HREAP after that I go to HREAP tab and native vlan 1 (by default)(I have changed native vlan 1 to 51.) vlan support is enabled. then click on vlan mapping and my wlan (guestwlan) is there with vlan id 24.
    I have assigned static IP to AP (192.168.51.40/24 gw 192.168.51.254).
    DHCP is running on controller.
    switch port configure is below:
    interface FastEthernet0/18
    description WiFi access point
    switchport trunk native vlan 51
    switchport mode trunk
    no ip address
    end
    Issue : authentication done through RADIUS (Cisco ACS 4.2) but no getting IP address from DHCP.
    Please help.
    Thanks in Adv.
    Thanks,
    AS

    Hi AS,
    Do not use the DHCP on the WLC.
    Use a DHCP on the neighbor swtich if possible for the native VLAN.
    Regards,
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Doubt in oracle AS adapter configuration with siebel

    Hi,
    I want to configure oracle AS adapter with siebel... i followed follwing steps for that...
    1) installed Oracle 10g
    2)installed oracle 10g oracleasinfra(10.1.2.0.2)
    3) installed oracle 10g oracleasmidtier(10.1.2.0.2)
    4) installed oracle AS adpter(10.1.2.0.2)
    Now i need to download files for siebel... i dont have access to metalink so i went edelivery.oracle.com website
    i found there Siebel business application media pack(7.8.2)... there are 6 parts in that... i assume i need to download all the 6 parts aslo with the english language extension pack( also 4 parts)...
    Then what should be done...
    Remember i need to configure it with Oracle AS adapter (10.2.0.1.2)
    Please help me out..
    Thanx in advance...

    Hi,
    You need to copy some jar files too. Have you done that.??

  • Configuring Oracle AS adpaters with Siebel

    Hi,
    I want to configure oracle AS adapter with siebel... i followed follwing steps for that...
    1) installed Oracle 10g
    2)installed oracle 10g oracleasinfra(10.1.2.0.2)
    3) installed oracle 10g oracleasmidtier(10.1.2.0.2)
    4) installed oracle AS adpter(10.1.2.0.2)
    Now i need to download files for siebel...
    I think Siebel 8.0 is not compatible?
    i dont have access to metalink so i went edelivery.oracle.com website
    i found there Siebel business application media pack(7.8.2)... there are 6 parts in that... i assume i need to download all the 6 parts aslo with the english language extension pack( also 4 parts)????...
    Then what should be done?...
    Remember i need to configure it with Oracle AS adapter (10.2.0.1.2)
    Please help me out..
    Thanx in advance...

    Hi,
    Tell me about the jar files required to be copied...
    one is xalan.jar
    siebel.jar
    Tell me about them and where to be copied? and what all i need to install from siebel 7.8.2.?.. and what all jar files need to be copied after that? and which all steps to be performed after copying those jar files? please give me an idea on this... I am new to this... thats why
    Your reply will be very much appreciated...
    Thanx in advance....

  • How to configure for GPlus Adapter with SAP Phone and SAP CRM

    Hi All Basis Adm,
                   Please consider as an urgent basis i need the information that how to configure  GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1).  If u have any document regarding mentioned above than that will be acceptable. 
    Regds,
    Govinda

    Hi Prasad,
    In you case, it's a file to file scenario.
    Go thro' this link for a solution:-
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    Regards.
    Praveen

  • Configure HFM environment with SSL

    Hi all
    I am in the middle of process to install HFM environment
    For the first time I need to configure HFM environment with SSL
    Before I started to install the HFM environment with SSL
    I read the SSL CONFIGUATION GUIDE to understand what I need to configure
    My environment based on web logic web server version Bea WebLogic_9.1_Express
    As I started I read the part of information on configuring your web server for SSL
    The next step was creating CA. The Company created for me CA ( file *.cer ) that I can continue with the issue, and this is what I do:
    I configure the HSS for SSL Using a text editor, open Hub.properties. Create the following entry in Hub.properties. sslEnabled=true
    And. Saved the file Hub.properties.
    The next step was configure the HSS Server on WebLogic
    I Log on to the Web Logic Administration Console.
    Select Servers > Shared Services (admin).
    From General tab, I select SSL Listen Port Enabled.
    Specify the port (for example, 58082) on which Shared Services will listen for SSL communication
    At last I Navigate to Keystore tab and set up the identity and trust keystore
    And fill the parameters
    At the end I restarted HSS services and Log on to User Management Console as Shared Services Administrator. Connect using the secure
    URLhttps://<host>:<SSL-port>/interop; for example, https://myServer:58082/
    interop.
    The things doesn’t seems that they work, I don’t know how can I be sure that all the parameter's that I fill is right?
    Nothing writes on Hyperion SSL PDF
    The web logic doesn't notify any error, all I can is just to get to the standard port 58080
    Thank
    Renan

    Hi Renan,
    One thing to realize is you don't need to have Shared Services in SSL mode to have HFM in SSL mode.
    The main reason you would want Shared Services in SSL mode was if IT/Info security mandated that your directory service (active directory, ldap, ...) be encrypted. If the corporate directory service is not encrypted you should skip making Shared Services encrypted which will simplify things some.
    Also once you had gotten shared services up on 58082 you would need to unregister/register all the installs to use 58082 and check the SSL box on the Shared Services install.
    Good Luck,
    -John

  • How to configure File Adapter along with OS command option

    Hello,
    I want to configure a scenario using File Adapter with OS command option.
    How to use that option in channel configuration of File Adapter.
    What is the default path where it is actually runs this OS command?
    Thanks,
    Soorya

    >
    surya venkat wrote:
    > Hello,
    > I want to configure a scenario using File Adapter with OS command option.
    > How to use that option in channel configuration of File Adapter.
    There are two ways to use the Os command in the file adapter.
    Lets talk about the sender File Adapter.
    First: Run operative system Before Message Processing
    Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
    e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
    ... After Message Processing
    After Xi has processed the message, you can trigger a new os level command:
    e.g. Trigger a mail, check if the archiving was successful, etc.
    > What is the default path where it is actually runs this OS command?
    >
    Theres no default path, you assign the desired path in the Comm Channel configuration.
    > Thanks,
    > Soorya
    I hope it helps.

  • Problems with OracleAS adapter for Siebel

    Hi,
    I have a problem starting the Java data bean connection from the OracleAS Adapter Application Explorer. When I try to connect to my Siebel Instance I get the following error from the application explorer
    Problem Activating adapter. (null). See logs for details.
    When I look in my logs $ORACLE_HOME/adapters/application/config/siebelconnection/logs I get the following information
    Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    Found adapter 'IWAF'
    Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    Found adapter 'Siebel'
    Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/adapte
    rs/application/config/SiebelConnection/repository.xml' resolved to repositoty ty
    pe: file
    Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2
    /eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&p
    assword=***'...
    Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Created Repository System storage.
    Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [state] State Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/ad
    apters/application/config/SiebelConnection/st_repository.xml' repositoty type: f
    ile
    Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [state] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2/e
    aidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&
    password=***'...
    "aejca_1160581888102.log" 100 lines, 13137 characters
    Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'IWAF'
    Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'Siebel'
    Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Repository URL 'file:///space/oracl
    e/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml' resolved to repositoty type: file
    Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Getting Repository reference: 'file
    :///space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&password=**
    Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Created Repository System storage.
    Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] State Repository URL 'file:///space/o
    racle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml' repositoty type: file
    Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Getting Repository reference: 'file:/
    //space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&password=*
    Wed, 11 Oct 2006 16:51:28.0415 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Created State Repository System stora
    ge.
    Wed, 11 Oct 2006 16:51:28.0449 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Creating IWAF Container classload
    er using libdir '/space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/lib'.
    Wed, 11 Oct 2006 16:51:28.0751 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0752 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building adapters list...
    Wed, 11 Oct 2006 16:51:28.0753 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Adapter: Siebel
    Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Inspecting adapter 'Siebel' modul
    es.
    Wed, 11 Oct 2006 16:51:28.0770 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Skiping IWAF Container adapter.
    Wed, 11 Oct 2006 16:51:28.0807 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0808 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building default security manager
    Wed, 11 Oct 2006 16:51:28.0809 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0811 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.home is set to '/space/oracl
    e/product/10.1.2.0.2/eaidev1/adapters/application'.
    Wed, 11 Oct 2006 16:51:28.0812 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.config is set to 'SiebelConn
    ection'.
    Wed, 11 Oct 2006 16:51:28.0813 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Using default: keystore.type=jks
    and keystore.password=iwaysoftware
    Wed, 11 Oct 2006 16:51:28.0814 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Security manager using keystore :
    /space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/security/keystore.jks
    Wed, 11 Oct 2006 16:51:29.0416 BST - Thread[Thread-5,6,main] [warn ] [IWAF JCA] [container] Security manager will not be avai
    lable due to problem.
    java.lang.IllegalStateException: Problem loading keystore: java.io.EOFException; make sure the password is correct
    at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:39)
    at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
    at com.iwaysoftware.af.container.IWAFFactory.buildSecurityManager(IWAFFactory.java:209)
    at com.iwaysoftware.af.container.IWAFContainer.start(IWAFContainer.java:169)
    at com.ibi.afjca.spi.IWAFManagedConnectionFactory.getContainer(IWAFManagedConnectionFactory.java:536)
    at com.ibi.afjca.spi.IWAFManagedConnectionFactory.createManagedConnection(IWAFManagedConnectionFactory.java:215)
    at com.ibi.afjca.spi.IWAFConnectionManager.allocateConnection(IWAFConnectionManager.java:35)
    at com.ibi.afjca.cci.IWAFConnectionFactory.getConnection(IWAFConnectionFactory.java:103)
    at com.iwaysoftware.iwae.common.JCATransport.initJCA(JCATransport.java:104)
    at com.iwaysoftware.iwae.common.JCATransport.<init>(JCATransport.java:85)
    at com.iwaysoftware.iwae.common.AdapterClient.<init>(AdapterClient.java:85)
    at com.ibi.bse.ConfigWorker.run(ConfigWorker.java:41)
    at java.lang.Thread.run(Thread.java:595)
    Wed, 11 Oct 2006 16:51:29.0419 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Starting IWAF container managers.
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager starting...
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager started.
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager starting...
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager started.
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager starting...
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager started.
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager starting...
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager started.
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
    ing...
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Target ID l
    ist..
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0826 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating TID for ada
    pter 'Siebel' configuration 'ReutersSiebel'.
    Wed, 11 Oct 2006 16:51:29.0840 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
    eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:29.0892 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Port list..
    Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Channel lis
    t..
    Wed, 11 Oct 2006 16:51:29.0911 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0945 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.channel_ReutersSiebelHTTP
    ] Created adapter instance for class'class com.ibi.http.adapter.HTTPListenerAdapter'.
    Wed, 11 Oct 2006 16:51:29.0955 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating channel for
    adapter 'Siebel' configuration 'ReutersSiebelHTTP'.
    Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
    ed.
    Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:30.0008 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF contained started.
    Wed, 11 Oct 2006 16:51:30.0018 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA IAEAdapter] IWAFManagedConnection for IAEAdapt
    er:null has listener registered: com.ibi.afjca.spi.IWAFConnectionManager@cb754f
    Wed, 11 Oct 2006 16:51:31.0282 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:31.0289 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.http.adapter.HTTPListenerAdapter'.
    Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.mq.MQListenerAda
    pter] init called.
    Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.mq.MQListenerAdapter'.
    Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.file.FileListene
    rAdapter] init called.
    Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.file.FileListenerAdapter'.
    Wed, 11 Oct 2006 16:51:58.0450 BST - Thread[Thread-7,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
    eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:58.0811 BST - Thread[Thread-7,6,main] [error] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Pr
    oblem activating adapter. (null). Check logs for more information
    java.lang.IllegalStateException
    at com.ibi.adapter.siebelaf.SiebelAdapter.activate(SiebelAdapter.java:143)
    at com.iwaysoftware.af.container.adapter.ProxyAdapter.activate(ProxyAdapter.java:104)
    at com.iwaysoftware.af.container.adapter.AdapterConfiguration.activateAdapter(AdapterConfiguration.java:319)
    at com.iwaysoftware.af.container.adapter.AdapterConfiguration.getActivatedAdapter(AdapterConfiguration.java:299)
    at com.iwaysoftware.af.container.AdapterManager.getActivatedAdapter(AdapterManager.java:269)
    at com.iwaysoftware.af.container.IWAFContainer.getActivatedAdapter(IWAFContainer.java:526)
    at com.iwaysoftware.af.container.AEManager.getTargetAdapter(AEManager.java:646)
    at com.iwaysoftware.af.container.ae.AETargetMessage.buildGETTARGET(AETargetMessage.java:255)
    at com.iwaysoftware.af.container.ae.AETargetMessage.build(AETargetMessage.java:84)
    at com.iwaysoftware.af.container.ae.AETargetMessage.<init>(AETargetMessage.java:54)
    at com.iwaysoftware.af.container.AEManager.dispatch(AEManager.java:131)
    at com.iwaysoftware.af.container.IWAFContainer.dispatchAERequest(IWAFContainer.java:612)
    at com.ibi.afjca.cci.IWAFInteraction.execIWAE(IWAFInteraction.java:270)
    at com.ibi.afjca.cci.IWAFInteraction.exec(IWAFInteraction.java:155)
    at com.ibi.afjca.cci.IWAFInteraction.execute(IWAFInteraction.java:93)
    at com.iwaysoftware.iwae.common.JCATransport.execute(JCATransport.java:204)
    at com.iwaysoftware.iwae.common.AdapterClient.getTarget(AdapterClient.java:293)
    at com.ibi.bse.TargetWorker.run(TargetWorker.java:37)
    at java.lang.Thread.run(Thread.java:595)
    My platform is AS 10g (10.1.2.0.2) with Adapters (10.1.2.0.2) on Solaris 10. I am connecting to a Siebel 7.8 instance running on Windows 2000 SP4.
    I would be very grateful of any help you could give.
    Regards,
    Mark.

    Hi,
    There could be couple of possible reasons for this. Please see below:
    1. When you configure a adapter target for Siebel 7.7 or 7.8, do not supply a value for "Siebel Server" field. Please see details related to this in the "Defining a Target to Siebel" section of the Siebel adapter user guide.
    2. If the adapter is installed in the UNIX platform, then necessary encoding should be added to the Application Explorer and the Application Server. Please see the details for this in the "Establishing a Connection (Target) for Siebel" of the Siebel adapter user guide.
    Let me know whether this sorts out the issue or not.
    Regards,
    Kris

Maybe you are looking for