Need to configure Airport connection to access corporate wireless network

Need to configure Airport connection to access corporate wireless network.
Have imported my certificate from Windows XP machine into keychain and made Leopard always trust in order to authenticate automatically into my corporate wireless network. Also attempted to establish a new 802.1x connection via network preferences without any success. It keeps asking me for username and password even though we used self-generated certificates to log into corporate wireless network. Does anybody have any instructions on how to successfully configure certificates in Leopard?

Welcome to the discussion area, jackregan!
You'll need to "hard reset" the Time Capsule and then reconfigure it again. To do this, you will hold in the reset button until you see the amber light begin to blink more quickly, keep holding another second or two and then release.
The "hard reset" will not affect the data on your Time Capsule
Now you can open AirPort Utility and configure the Time Capsule using wireless (be sure to log on to the default network which will have a name like Apple Network xxxxxx), or you can connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule to have AirPort Utility communicate with it that way.
When you open AirPort Utility, click Continue to follow the guided setup to re-configure your Time Capsule. You would choose the option to "Create a wireless network" when you are given the configuration options.

Similar Messages

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
     ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
     ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

I need help configuring a connection with asdm 5.2 for asa

Hi All
I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
When he tries to connect he gets the error
Cant connect to MySql Server at "IP Address" (10060)
He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
Any help would be greatly appreciated

Hi,
I'm not a security specialist but here is how I had it set up at home:
Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
Hope this points you in the right direction.

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

You need the Airport card OR Airport Express but not both. Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
To set up the AE, you do need OSX 10.4 or higher.

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

Users not being notified AD password is going to expire when connecting to corporate wireless network

Hi All
In my company we are still on Windows XP. Every month there are hundreds of calls generated for users who connect primarily to the company network via our Corporate wireless and the passwords expire but they are not notified it is going to expire.
This means when users passwords do expire they are then not able to connect to the corporate wireless and the only way to get them up and running again is for them to call the Service Desk and they will then reset the password back to what it was previously.
This has been logged to the companies 3rd line team and they are telling me there is no way to resolve this. I find this pretty unbelieveable as WinXP is a long established Operating system across most companies in the world and having the above
scenario is a massive security risk.
Does anyone know of or have experience of this?

Hi,
You can use Powershell script to send email notifications on AD user password expiration.
Checkout the below link for Powershell script for Password Expiry Email Notification,
http://gallery.technet.microsoft.com/Password-Expiry-Email-177c3e27#content
If you are interested in evaluating third party tool, checkout this
link.
Regards,
Gopi
JiJi
Technologies

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

Can I use my airport express to extend a wireless network with a non-apple router?

I have been trying to extend my wireless network in my house. Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6). I want to be able to share my printer and use AirTunes. Currently I have the AirPort plugged into the router and setup to create a new wireless network. I would like to combine them so I don't have to switch between to print and play music. I am not really sure where to start or if it even possible. Any info would be great!

If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
If you do not need extra wireless coverage, you can turn off the wireless on the Express.
The Express must be in Bridge Mode.
Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

Adding Airport Express to D-Link wireless network

We have a D-Link wireless router given us by our ISP. I have an Xbox 360. I'd like to take one of our Airport Expresses, and connect the 360 via Ethernet cable to the Airport Express, while the Airport Express joins the D-Link's network, thus giving my 360 wireless internet.
We used to accomplish this using another Airport Express instead of the D-Link, but for our own reasons, we now need to use the D-Link.
Is there a way to add the Express to the network for this purpose?

"Is there a way to add the Express to the network for this purpose?"
Yes, configure the Express to "Join" the wireless network created by the D-Link and check the "enable ethernet clients" box. Post back if you need step by step on this configuration.
It's possible that this may work OK for you if you have a strong, fast wireless network. But, you may also want to consider that this would be quite a way down on the list of most desirable ways to connect the 360 to your network.
For the best video quality, suggested in order of preference:
Ethernet cable from one of the LAN ports on your router to the 360
Ethernet powerline adapter at the router end and another adapter at the 360 end
Wireless from your D-Link to the 360's wireless-if it will accept a wireless connection
Wireless from your D-Link to the Express. Ethernet from the Express to the 360
Would be interested in your feedback on your experience if you use the Express.

HT5022 How do i use my airport extreme to extend my wireless network, or make the signal stronger

I have a wireless modem/router and want to use my airport extreme to strengthen the signal throughout my house...how do i do that?

Plan to establish a permanent Ethernet cable connection from one of the available LAN <-> ports on your modem/router to the WAN "O" port on the AirPort Extreme. Locate the AirPort Exteme in a central location in the general area where more wireless coverage is desired.
Configure the AirPort Extreme using AirPort Utility to "create" a wireless network using the exact same wireless network name, same exact wireless security settings and same exact password that your modem/router uses.
Finally, the Extreme must be configured in Bridge Mode to operate correctly with the modem/router.
To get everything in the proper sequence on the network....once the Extreme is configured, power off the entire network for a few minutes. Then start the modem/router first and let it run a minute by itself. Then start the Exteme next the same way. Continue starting devices the same way until the entire network is back up.

I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

Need to configure Airport connection to access corporate wireless network

Similar Messages

Maybe you are looking for