Need to configure Enterprise Manager after Oracle 10g installed on Windows7

I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AM

889075 wrote:
I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AMBTW, V10 Oracle is unsupported
which version of Oracle to 4 decimal places?
which edition of Windows 7?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Similar Messages

How can I enable Enterprise Manager in Oracle 10g?

Hi,
We recently installed Oracle 10g on a MS Window server and after the installation which we created 2 instances each with a default schema from an existing data file (.dmp). After the installation, I realized that somehow, the DBConsole entry is missing in the Windows Services which then prevent me from being able to launch the new browser-based EM.
We thought we have picked all the components during the installation but for some reasons, it seems like the necessary files or configurations for EM was not there. So I was wondering if anyone know how I can manually install and configure EM?
Initially I thought if I go thru Oracle Universal installer and re-install everything again, it might help but I am concern that it will then wipe out the 2 instances and schemas that we have already created, especially since I have also applied the 10.2.0.3 patch already. So there was some discussions on calling the emctl program which when I tried, it I got error saying that ORACLE_SID not found. Then there was also some documentation on using the EMCA command to build the dbconsole, is that what I should do?
Lastly, I was under the impression that one will only setup one EM per server, which means in a perfect world, I will have one instance of the EM which will then allow me to manage the multiple instances (and their schemas) from the same console, is that correct? Or is one EM instance only manages one instance of the database? So if I have TESTDV & TESTUT configured on the same server, I will need to also create two EM consoles?
I am an amature and am more familiar with Oracle 9i which the EM seemed to be easier to use and setup. So I think I must have skipped or missed some steps during my 10g installation but am concerned that if I reinstall, I will lose everything.
Thank you very much.

First of all, thank you as always for taking the time...
I apologize in advance if I am not using the right terminology. Basically, I have only one Oracle Home directory on that server but I am able to create two different instances and in both cases, I have left the port number to be the same thinking that it's only one physical installation. I thought I would attach my TNSNAME and LISTNER ora files below to give you a better picture of my current setup.
So for me to connect to the database and the appropriate instance for example, like using SQL Developer, all I have to do is specify the Host Name to DBServer and then the Service Name to either TESTDV or TESTUT. Then I can connect to each of the instance directly.
But I only have one Oracle_Home directory and use the same port number as the default choice. So to your comment, if I only have one Oracle_HOME and one Port number, should I only install one EM instance?
Thanks much.
******In the TNSNAMES.ORA file:*****
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
TESTDV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTDV)
TESTUT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTUT)
*****In the LISTNER.ORA file:*****
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_NAME = TESTDV)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTDV)
(SID_DESC =
(GLOBAL_NAME = TESTUT)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTUT)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Problem In Enterprise manager with Oracle 10g AS 10.1.3.1.0

dear all,
I installed Oracle Application server 10g (10.1.3.1.0) on REDHAT Enterprise Linux 4 AS Update 4, so evrything done throu installation , but after installing when i try to open EM with browser http://localhost:7778/em not working and appear mesage (The Request URL/em was not found on this server) so i tried with ip-addressand with FQDN but not working, opmnctl service all running successfuy !!! (OC4J ,HTTP all working done - i made restat to all opmn services and the same result!!!!)
how can i solve this problem????
Thanks

Thanks Dear Jacco,
but i installed only OC4j and HTTP components , so control is working opmnctl working every think and components working good , but the strange in this case when i tried to fine emctl file but its not found !!!! (emctl start iasconsole) in this version of Oracle 10g AS .
what u think?

Unable to access Oracle Enterprise Manager in Oracle 10g AS Machine

Hi All,
We are working on oracle forms 10g in 3 tier architecture. I have installed oracle 10g Infrastructure (OraHome_1) followed by oracle 10g Application server (middle-tier,OraHome_2). I have copied all the forms to OraHome_2\forms folder and compiled them successfully.
When i tried to access enterprise manager (Infrastructure)thru http://myappserver:18100, i was unable to do so. It displayed "page cannot be displayed".
Also
When i tried to access enterprise manager (middle-tier)thru http://172.16.1.1:18101, i was unable to do so. It displayed "page cannot be displayed".
I checked for port status, thru “netstat –na” command, It was displaying
172.16.1.1 18100 TIME_WAIT
172.16.1.1 18101 TIME_WAIT
172.16.1.1 7777 TIME_WAIT
Why is that i am unable to access the Enterprise Manager?

Hi All,
I was able to resolve the issue. Thr was a proxy server enabled in the IE in AS machine. Once i checked the option for bypassing it and turned off the windows firewall(OS was win 2003 server). I was able to view the home page at http://myappserver, then was able to access EM also.

Installation of Enterprise Manager for oracle 10g

Hello.
have a database created on oracle 10.2.0.1.0, but I don't have installed the enterprise manager.
I need to install the enterprise manager to manage the database.
Anyone knows any procedure or any link to see some examples of installation.
Thank you for your help

A couple of quick points:
1. 10.2.0.1 is many years old an in desupport mode. Currently supported versions are 11.1.0.6 and above.
2. Enterprise Manager is not required to do anything and many of us prefer to not use it.
That said ... did you read the installation docs? Which ones? Please provide the link and explain what in the doc is not clear.

SQL Tuning using Enterprise manager in oracle 10g

Hi,
In oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL Tuning ADvisor and SQL access advisor.
I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if some one could explain me that process...
Again thanking you in advance
regds
Manoj Gokhale

Hi Manoj,
Didn't you already start two other threads about this same question the SQL forum?
How do i do the SQL Statement tuning
Enterprise Manager - sql tuning advisor , Access advisor for SQL Tuning

Configure Enterprise Manager in an Cluster Environment

Hi,
I have a Oracle Database 10g Enterprise configured in a Red Hat Cluster environment in an active/passive automatic failover topology.
I need to configure Enterprise Manager in this database.
Can anyone help wiht the steps to perform it. Can it be done with the 'emca' by just giving with some means the virtual IP address of the Oracle Service in the cluster.
Best Regard,
Drini

Start reading
Using RepManager Utility
Oracle® Enterprise Manager Grid Control Advanced Installation and Configuration Guide
*11g Release 1 (11.1.0.1.0)*
http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/appdx_repmgr.htm#CFAGHEJF
Regards
Rob
http://oemgc.wordpress.com

Steps to configure Enterprise Manager (oracle 10g with Window2003 Entp OS

Hi Experts,
Could any one provide me with steps to configure Enterprise Manger.
Also let me know any parameter or services to be cheked before starting the Enterprise Manager.
I am facing problem while configuring it, I would be thankful to you if u can provide me details.
So that I can start once again configuring Enterprise Manager.
Regards
Sri

To configure please run the command emca -config dbcontrol db -repos create
Edited by: mnazim on Mar 10, 2011 9:38 PM

Configure Enterprise Manager Console in Oracle 10.2.0.4

Hi.. Friends,
We recently upgraded our SAP 4.7 to ECC 6 with Oracle 10.2.0.4 DB.. In Oracle 9 we have an option Enterprise manager console But in our new Oracle 10.2.0.4 there is no option like that. How can i configure Enterprise Manager console in this.
Our Operation System is Windows Server 2008.
Regards
Mahendran

Hi Mahendra,
OEM not supported in standard SAP See note Note 105047 - Support for Oracle functions in the SAP environment.
You can configure OEM but first check your license scope - Note 740897 - Info about the Oracle license scope; Required Oracle options
After fullfill read below note
Note 355770 - Oracle Enterprise Manager Database Control
Note 386413 - Oracle Enterprise Manager (OEM) in the SAP environment
SurendraJain

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

Error while configuring Enterprise manager

Hello,
I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
*"Configuring database with database control requires a listener to be configured in the current oracle home.
You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
My OS is Windows 7
is there any other way to configure Enterprise manager OR do i need to install any specific package
Thank you friends.

Hi, Finally i created a listener "KUMAR"
*Microsoft Windows [Version 6.1.7600]*
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\praveen kumar gogula>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
*:44*
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     KUMAR
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                22-SEP-2011 17:44:58
Uptime                    0 days 0 hr. 5 min. 48 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
ml
Listening Endpoints Summary...
*(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
*(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "praveen" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
Service "praveenXDB" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Users\praveen kumar gogula>
What to do next?

Enterprise manager console for 10g.

How do I get enterprise manager console for 10g? I installed 10g on my machine awhile ago and just noticed that enterprise manager console was not installed with it. When I installed Oracle 9 a while back, the console was installed automatically.

DB Control Repository is needed to run EM. To create it you can use emca or dbca command.
See http://download-west.oracle.com/docs/pdf/B12013_01.pdf
Paul

Trouble in configuring Enterprise Manager

I am trying to Configure Enterprise Manager through DBCA tool.
Soon after the completion of 80% configuration its coming out.
When I checked in the log file, I have the following details shown below:
I would appreciate if u can provide me the solution
Thank u
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: C:\oracle\ora102
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.EMConfig isEMConfigured
CONFIG: isEMConfigured for DB: SAN01
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: SAN01 Host: 192.168.88.128 Node: null OH: C:\oracle\ora102 isDBC: false
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: SAN01 Host: 192.168.88.128 Node: null OH: C:\oracle\ora102 agentHome: null isCentral: false
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to C:\oracle\ora102\oui
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to C:\oracle\ora102\oui
Mar 8, 2011 10:32:33 AM oracle.sysman.emcp.util.CentralAgentUtil getCentralAgentHomeAndURL
CONFIG: Central Agent home and URL: {}
Mar 8, 2011 10:33:17 AM oracle.sysman.emcp.EMConfig finalize
CONFIG: finalize() called for EMConfig

Hi,
do you have adminrights to ORA_DBA group (In your local users and groups ) ?
Soon after the completion of 80% configuration its coming out.What's the actual problem ?
You posted a section of the install log. Is there any errors available? Please post (even a sample of) the file, but at least till the end of it!
Please post the alert log of the database with sid : SAN01
Thanks,
Thierry

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

Need to configure Enterprise Manager after Oracle 10g installed on Windows7

Similar Messages

Maybe you are looking for