Need to create a new technical user in E-Sourcing

Hi,
We have configured E-SOurcing production(ESP) with read-only corporate
LDAP.
Now we have to create a new technical user with 'KMAdministrator'
profile in E-Sourcing.. As the LDAP is read-only, we will not be able
to create users in E-SOurcing.. Also we cannot use any other ID to be
used in the configuration section..
Please guide us about the Best Practices in this scenario
Thanks
Thilip Kumar

Hi Thilip,
There is no way to create KMAdmin user in E-Sourcing if LDAP is only in read only mode.
Ask your LDAP team to create a user for you with limited access and then you can define roles in E-Souring system for KM usage type.
Also you can use any existing technical user present in LDAP.
~Ankush Mittal

Similar Messages

  • How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

    How do I move all my files from one User Profile (account) into another?
    I needed to create a new account and want all of my files accessible in the new one.

    ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
    now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
    the start of that tree is /
    so, if you were to do:
    cd /
    (cd means change directory)
    it will bring you at the highest branch of the file system.
    cd /Users
    will bring you to where all the users are.
    to see whats in /Users you can use your friend ls command
    ls means list files/directories
    so:
    cd /Users
    ls -la
    (the -la here means show all (even hidden) and long format (very verbose))  this flag is very optional.
    you will see
    fred
    user2
    for example.
    if you want to see the desktop of user2 you would change directory to it then list the files.
    for example:
    cd /Users/user2/Desktop
    Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
    ls -la
    you should then be able to see everything in users2 desktop
    you could have done as well the same thing in smaller steps, for example:
    cd /
    cd Users
    cd user2
    cd Desktop
    this is the equivalent of cd /Users/user2/Desktop
    So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
    /Users/user2
    which most likely the file you had created from the other user was in /Users/user1
    if you copied all the files from /Users/original_user to /Users/secondUser
    most likely yes, all your mail, bookmarks etc would be copied over.
    so in your case.
    sudo chown -R seconduser:staff /Users/secondUser
    should work
    Remember that if you start a path with the character /  it means start from the root of the file system, at the highest top you can ever get.
    so
    cd /Users/fred
    is not the same as
    cd Users/fred
    unless you were in / already
    i know it may be confusing at first but it's actually very logical if you play with it.
    to simplify, think of it that / means C:\  on windows
    you can't go any higher than C:\  (in a way)
    if you're unsure which directory you're currently in, you can always type:
    pwd
    it will tell you where you are.
    for example:
    cd /
    pwd
    this shows  /
    cd Users
    pwd
    this now shows /Users
    cd /System/Library
    pwd will show /System/Library
    cd /
    cd /Users
    cd fred
    cd Library
    pwd will show /Users/fred/Library
    unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
    so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
    ls -la  (this shows all the files where you are)
    if you see myfile in the list
    do a pwd
    whatever is return, the real location of the file would be:
    whatever pwd returned / myfile
    I hope that makes sense.

  • HT4796 do i need to create a new user each time i do a migration ?

    do i need to create a new user each time i do a migration ?

    If the computer you are migrating to already has a user the Migration will create a new one.
    If not Setup Assistant should be used instead (see Pondini's Guide)

  • How to create a new admin user in oracle 9i?.

    Hi I am new to oracle. I want to set up a new database for my application.
    How to create a new admin user in oracle 9i?. I would like to have a new schema. where I can create tables for my application from scratch.

    If I understand your question correctly:
    You need to be connected to the database with the user SYS.
    open a command-line session and do the following to create an Oracle user with DBA option other than SYS.
    C:\>sqlplus /nolog
    SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 14 08:46:13 2005
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    SQL> conn  /  as sysdba
    Connected.
    SQL>
    SQL> create user test identified by pass;
    User created.
    SQL> grant create session to test;
    Grant succeeded.
    SQL> alter user test account unlock;
    User altered.
    SQL> grant dba to test with admin option;
    Grant succeeded.
    SQL> conn test/pass
    Connected.
    SQL>
    SQL> sho user
    USER is "TEST"
    SQL>Now you have a user with username 'test' and password 'pass' with DBA role with Admin option
    Tony Garabedian
    From now on you can connect directly with SQL*Plus no need for comman-line. Just provide the username/password and you're logged in.
    Message was edited by:
    Tony Garabedian

  • I need to create a new admin account. But i lost the cd it came with and forgot my password. also can a cd be replaced

    I need to create a new admin account. but i lost the cd that came with the macbook, and forgot my password. also can the cd be replaced.

    You can purchase replacement discs from AppleCare:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.
    You can try the following to reset the password without the DVD:
    How to change your username and/or password from the Terminal
    1. Boot into single-user or verbose mode
    2. At the prompt enter the following commands.  Press RETURN after each:
    fsck -fy
    mount -uw /
    launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist
    dscl . -passwd /Users/username password
         Replace username with the targeted user and password with the desired password.
    reboot
    This allows you to reset the password in single user mode without booting from the install media.  The above tip is attributed to Satcomer.

  • Needed to create a new cost element hierarchy to come in line

    needed to create a new cost element hierarchy to come in line with Victory reporting.  I went into create new group and referenced NETEXPS2.RD so that I could then edit it.
    I made all the changes required for the new hierarchy NETEXPS3.RD.  Unfortunately some of the changes I made have changed NETEXPS2.RD.
    Is this my fault for referencing?  Is there any way of going back to the original NETEXPS2.RD version and fixing it?
    Please suggest for the above.
    Regards
    Srinivas.

    In addition to Krishna if you don't want to expose all the package to the trainee, then create a new role keeping everything same as default MODELING role (open it and have a look) but in "PACKAGE PRIVILEGES" add only those package that you want to expose to the end users.
    Regards
    Kumar

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • I know my Apple Id (not .mac) and password but I can't logon to ichat.  I keep getting a message of password not matched.  Do I need to create a new account for Ichat?

    I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat.  I keep getting a message of password not matched.  I saw somewhere that my Apple id is the same as my ichat account.  Do I need to create a new account for Ichat?  I've already reset my Apple id password 3 times in the last 2 days.  What am I doing wrong?

    Hi,
    At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
    Other IDs such as to log in to Discussions were know as Discussion IDs
    Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
    There can be a variety of combos now
    iChat Name
    @mac.com before MobileMe
    @mac.com post MobileMe
    AIM Names
    AIM names current
    MobileMe (@Me.com)
    Style
    Email Address valid with the .Mac service prior MobileMe Note 1
    Email style Name Valid with AIM
    May or may not be an Email address
    Can be AIM issued or third party Email address
    Valid Email with MobileMe Service
    Other Abilities
    May also be Currently valid email linked to a MobileMe account
    Maybe Valid Apple ID
    Is a Valid AIM Screen Name
    May Not be a Valid Apple ID (was an option choice at one stage)
    Is a Valid AIM Screen Name
    May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
    Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
    Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
    Apple ID
    Possibly (likely)
    Possibly (depends when Registered)
    More currently Yes.
    No
    No
    Yes
    Glad I could help.
    8:39 PM      Thursday; September 15, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can i create a new Adminstrator user account ?

    How can i create a new Adminstrator user account ?

    Go to the System Preferences>Users.
    Click the lock if and enter your password, if necessary.
    Then click on the "+" symbol below the accounts list.
    From the "New Account" menu, select"Administrator" and fill in the rest of the information.
    And finally click the "Create Account" button.
    Done. A new Administrator user account.

  • Need to create a new row in table with same data as Primary key, but new PK

    Hello Gurus ,
    I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
    Any ideas of how it can be done without much complication?
    Thanks in advance for your reply.
    Reards,
    Swapneel Kale

    user9970447 wrote:
    Hello Gurus ,
    I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
    Any ideas of how it can be done without much complication?
    Thanks in advance for your reply.
    Reards,
    Swapneel Kalesomething like
    insert into mytable values ('literal for new pk',
                                           select non-pk-1,
                                                    non-pk-2,
                                                    non-pk-n
                                           from mytable
                                           where pk-col = 'literal for existing pk')

  • I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

    I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
    It's stays in the "deleting" but I can't cancel it or close the window.
    What can I do?

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

    I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

    As all of the msuic came from your computer in the first place it should still be there.  Is it not?
    EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
    Make sure that everything is on your computer.  You can transfer itunes purchases from the ipod.  Without syncing:  File>Transfer Purchases.
    When everything is on your computer, then it can be synced back to the ipod after updating.

  • Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?

    Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?

    settings - facetime - remove the apple id, on your husband phone.
    He should create his own id for imessage and facetime.

Maybe you are looking for