Need to create a page index for PDF
I'm not using the right term which is probably why a search comes up blank.
I want to create a page index that appears on the left of the content so people can direct select what page they would like to go to. I've seen this in files I've received but do not know what to call it. I thought it was an index and I created an in index in CS4 Acrobat Pro and then found it was for searching not for what I intended.
Help is much appreciated.
All you need to do after making changes to the source document is generate a new PDF, open the PDF that contains the bookmarks, and replace the old pages with the new. In Acrobat 9 you do this by selecting "Document > Replace Pages". Any bookmarks, links, fields, etc. will be retained and only the underlying page contents will be replaced.
Similar Messages
-
I was at Apple Store yesterday and they created a pages document for me. When I got home and tried to open it, I get a message that I need a newer version of Pages. I see the image before I push "open". The 'kind' is pages publication. The file does not appear in the 'open recent' list.
Just be careful with Pages 5, it is not strictly an upgrade.
Apple has actually removed over 90 features and some work can be very difficult in the newer version.
It was all done to make it more interchangeable with the inferior iOS version:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter -
Need to create stupid proof templates for non-designers
Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options. -
Need to create a driver class for a program i have made...
hey guys im new to these forums and someone told me that i could get help on here if i get in a bind...my problem is that i need help creating a driver class for a program that i have created and i dont know what to do. i need to know how to do this is because my professor told us after i was 2/3 done my project that we need at least 2 class files for our project, so i need at least 2 class files for it to run... my program is as follows:
p.s might be kinda messy, might need to put it into a text editor
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
}My source in code format...sorry guys :)
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
} -
How do I convert a document created in Pages to a pdf file?
How do I convert a document created in Pages to a pdf file?
The same way that you would do it for any application, print menu or export menu.
-
Has anyone used the Extract Odd/Even Pages action for PDFs? I'm trying to use it to extract pages from a PDF and save as separate files. When I use it the action spins for a moment, says it succeeded, but I don't get any new files.
I know of the java script method, just wondering why it can't be found as standard wizard tool ;-)
I have a java script to extract pages.
Is it possible to somehow create a droplet for it (as is possible with preflight profiles)?
Thanks. -
Hi,
How to give starting page number for PDF. If i need to start page number from 3 how can i do this ?
if i need to give randome page number best way to give it?
Following is the example
i have 6 page document.
the page number for the documents should be 3,4,5,9,10,13.
Thanks in advance...!!plz help me ..!!i would like to give exact senario
I have document which has 10 pages.Each page has page number on it...
There are 3 sections.First section is from 1st page to 4th page and second section is from 5th page - 8th page,second section has flowable content.For the second section we might get till 6th page or 7th page or 8th page.If we get till 8th page there will be no problem.If it ends at 7th page the page numbers sequence should be (1,2,3,4,5,6,7,9,10) But section 3 should start from 9th page.
Thanks in Advance -
What is variants...why we need to create these in bw for processchains run
what is variants...why we need to create these in bw for processchains run
Process Variant lets u select on what all Objects the process type need to process on.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
Ex : Create Index Variant will have the Cube name for which( Load ) the Indexes are created. -
I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?
You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.
-
I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?
Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Create coustom page size for Smartforms
Dear All
How to create coustom page size for smartforms.
rgds
pramodHI
To define a new page format, choose
Administration -> CCMS -> Print->® Spool Administration.
Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and Create or Create with Reference. Fill out the fields on the next screen.
Activating a New Page Format
Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
You also have to define a format and device type format for the new page format before you can use it.
Thanks and Regards
Santosh Kate -
Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?
settings - facetime - remove the apple id, on your husband phone.
He should create his own id for imessage and facetime. -
Need to create a Z transaction for SE16
Hi All,
I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
but this is giving a short dump.
Please let me know if the process i am following is correct if not can you please suggest me a better one.
Thanks in advance.
Regards,
LRK.Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Need to create a Change document for tracking Purpose on standard table
Hi Experts,
I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
Please advice.
Thanks!!Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Need to Create the STATUS Profile for Q-Info record
Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SMBS02--->Select the status say " QM_P_001" ->Copy As F6 - >Enter new name>enter.
Now chage the relevent data as per your requirement.
Maybe you are looking for
-
Question over the appraisal status change
Dear All, Our appraisal has ( following the flexible template ) has planning, mid year review and final phases. With in each main status we have sub status configured. Example - In the planning stage ( say in the month of February ) , employee add ob
-
How can I get rid of "Mac Protector" ad?
How can I get rid of "Mac Protector" ad?
-
Displaying "Revision Number" in a report
We use Crystal's revision number as a means to help us track a problem one of our clients may be having with a report we have provided them for use by our application. Revision number is found in the Crystal file document summary File > Summary Info
-
Problem of performance with xerces?
I am to build a server which parse XML message with sax(xerces) but when i send very many message to it,the parsing is sometime very slow (10x slower for 1 of 20 messages sent).Is anybody have an explication? (soory for my english :) )
-
I have a proxy that goes to my R/3 system. When using T-Code Sproxy i can see my inbound message interface and my proxy that i had developed. Well recently i made a change to the XSD structure for this message interface and now i can't seem to get th