Need to create a rifle scope POV in FCP5

Hi,
doers anyone know how I can crerate a rifle scope POV on an image in FCP? I.e. I need to have a black round edge around an image with a cross centered, so it looks like you looking through a rifle scope. Any help is appreciated . Thanks

Ok -- in FCP...
PS -- is there a FREE screen capture video thingie? I tried to make a video tutorial on this and can't find anything for free.
Create a new sequence and call it GunSight. But keep your target sequence on too... you'll now have two tabs in the timeline.
In the viewer on the bottom left there is an A... click on it and pull down SHAPES - Circle.
This will give you a soft circle. Hit F9 to insert it onto the timeline in V1.
Dbl click it to bring it back to the viewer. You have to do that or you won't affect the clip on the timeline.
Click the Controls tab in the viewer
Adjust the Softness to 0 and size up just so you are shy of the Motion safe area. Now you should have a sharp white circle in black.
cool.
Next... Click on the Video Tab again. Now go back to the A and get MATTE - COLOR.
Click this gray color and drag it onto the timeline creating a V2 track. They should be the same length.
Dbl click V2 to load back to the viewer. Hit Controls and select the gray square... this opens the color picker. Slide the brightness slider all the way to the bottom... the one on the right. This will make it black.
Click the MOTIONS tab. Twirl down crop and change Left to 49.75 and Right to 49.75. This gives you a line down the middle.
Next... click on the VIDEO tab again and drag the same clip onto V3.
Dbl click it and MOTION tab. Then change crop to Left 0, Right 0, top 49.75 and bottom 49.75.
Now you have the full gunsight in black with white where you want the video.
cool.
Go back to the original video.
Drag the sequence GunSight onto a top video track. Right-Click the GunSight layer (or control-click) and pull down to Composite Modes... choose Multiply.
Now you should see the video beyond the black.
You can now Control (right)-Click the GunSight layer and send to Viewer. There you can adjust simple motion values and keyframes to give it some motion.
Another cool thing is to add a Matte - Color... change to Green... under the GunSight layer and change IT'S composite mode to Multiply too... cheap night vision kind of look.
Good luck,
CaptM

Similar Messages

Need to create interactive document library

Hello Everyone
I need to create interactive document library in sharepoint 2013. When user uploads document, he should be able to write comment below that document and other users should be able to reply or post other document as well.
Is it possible to achieve this kind of feature in sharepoint?
Thanks

Hi,
Have you Configure social computing features in SharePoint Server 2013.
Enable the "SharePoint Server Standard Site Collection features"
https://<< Site URL >>/_layouts/15/ManageFeatures.aspx?Scope=Site
So that missing Social collaboration features are added into webpart catalog.
thx
iffi

Best place to create the DHCP scope for Guest SSID for remote office connected to HQ Foreign-Anchor controller

Hi Experts ,
Need help with the respect to understand the best practice to place/create the DHCP scope for remote site Guest SSID which will be connected to HQ Foeign-Anchor controller set-up.
how about internet traffic for Guest SSID , which one will be recommanded :
1) Guest SSID gets authenticated from HQ ISE and exposed to the local internet
2) Guest SSID gets authenticated from HQ ISE and exposed to the HQ internet
Thanks

Hi George ,
Thanks for your reply ...So you mean, best design would be to create the DHCP scope into DMZ for guest and let it get exposed to HQ internet ...
how about if I have another anchor controller in lets say in other office and I need to anchor the traffic or load balance from HQ foreign controller , in that case if I create DHCP scope into HQ anchor controller and if its down , I will loose the connectivity , how do I achieve fail-over to another anchor ?
Do I need to create secondary scope into another anchor controller and let the client get reauthenticated from other location ISE and get ip address as well from another anchor controller . Is it what you are proposing ?

Need to create report query to get latest open and last closed period for given application

Hi All,
I need to create a report query to get below result displayed in report output.
1)   -   Application name
2)   -    Ledger name
-o/ -Operating Unit
3)   - Last Closed Period
4)   - Current Open Period
5)   - Date Closed – Last Closed Period
6)   - Date Open – Current Open Period
I tr I tried to create the query below is the same. Please let me know if it looks fine.
SELECT *
FROM (SELECT fav.application_name ,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status ='C'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1
UNION ALL
SELECT *
FROM (SELECT fav.application_name Application_Name,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status = 'O'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc)
         WHERE ROWNUM = 1

It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM

Help needed to create Quik Time VR movies, step by step

Hello,
thank you for your attenction.
I need to create Quick time vr movies, and I need to know the exact sequance of steeps to do it, and if the starting point I use is correct.
1) I shooted a sequence of photos with my digital camera (for example: www.stebianchi.com/quicktimevrhelp/still-photo.jpg).
2) Then, with photoshop (CS4) I choose: Automate/photomerge and I select all them to joint them in a bigger 360° panoramic one (www.stebianchi.com/quicktimevrhelp/pan.jpg). If, untill here, all is correct, the first question: in photoshop Photomerge layout option, do I have to choose one voice "auto, perspective, cylindrical, spherical, etc..." rather than anoter one of these?
3) from here, I really need your help.
First of all: the great doubt:
My photos can not cover a spherical panorama, they're only a "ring" around a center (and not a spherical texture). To cover all the surface (or almost all, ok...) of my ambient, do I have to use a wider lens on my camera or there is a different solution (for ex a vertical photomerge?).
4) Done this, I think I shuold buy a software like Cubic converter, to set and export the QTVR movie. Right?
Thanks a lot guys,
all the best!
Stefano

You can call your local apple store(find one on the home page of apple.com) and they will give you instructions how to convert DVD to iPod. That is what they told me, but from what I heard, you may need more than Quicktime Pro. Just call and ask them, because if you make a manual of how to do it, it could help me a lot.
(I'm looking for a good DVD converter, already know some, beside the internet download ones)

Need To Create a table in Sql Server and do some culculation into the table from Oracle and Sql

Hello All,
I'm moving a data from Oracle to Sql Server with ETL (80 tables with data) and i want to track the number of records that i moving on the daily basis , so i need to create a table in SQL Server, wilth 4 columns , Table name, OracleRowsCount, SqlRowCount,
and Diff(OracleRowsCount - SqlRowCount) that will tell me the each table how many rows i have in Oracle, how many rows i have in SQL after ETL load, and different between them, something like that:
Table Name OracleRowsCount   SqlRowCount  Diff
Customer                150                 150
0
Sales                      2000                1998
2
Devisions                 5                       5
0
(I can add alot of SQL Tasks and variables per each table but it not seems logicly to do that, i tryid to find a way to deal with that in vb but i didn't find)
What the simplest way to do it ?
Thank you
Best Regards
Daniel

Hi Daniel,
According to your description, what you want is an indicator to show whether all the rows are inserted to the destination table. To achieve your goal, you can add a Row Count Transformation following the OLE DB Destination, and redirect bad rows to the Row
Count Transformation. This way, we can get the count of the bad rows without redirecting these rows. Since the row count value is stored in a variable, we can create another string type variable to retrieve the row count value from the variable used by the
Row Count Transformation, and then use a Send Mail Task to send the row count value in an email message body. You can also insert the row count value to the SQL Server table through Execute SQL Task. Then, you can check whether bad rows were generated in the
package by querying this table.
Regards,
Mike Yin
TechNet Community Support

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

do I need to create another account with a different email account
Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

New to applescript. need to create a plist file using applescript

Needed some help I need on creatinga plist file below using applescript and I can't make it happen needed some hand on this.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Username</key>
<string>${localAdminUser}</string>
<key>Password</key>
<string>${localAdminPassword}</string>
<key>AdditionalUsers</key>
<array>
<dict>
<key>Username</key>
<string>${userName}</string>
<key>Password</key>
<string>${userPassword}</string>
</dict>
</array>
</dict>
</plist>
I have tis code but it doesn't seems to work.
tell application "System Events"
-- create an empty property list dictionary item
          set the parent_dictionary to make new property list item with properties {kind:record}
-- create new property list file using the empty dictionary list item as contents
          set the plistfile_path to "~/Desktop/example.plist"
          set this_plistfile to ¬
make new property list file with properties {contents:parent_dictionary, name:plistfile_path}
-- add new property list items of each of the supported types
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Username", value:"${localAdminUser}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:list, name:"AdditionalUsers"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Username", value:"${localAdminUser}"}
make new property list item at end of property list items of contents of this_plistfile ¬
                    with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
end tell
The result of the above code will generate a plist file below
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>AdditionalUsers</key>
          <array/>
          <key>Password</key>
          <string>${localAdminPassword}</string>
          <key>Username</key>
          <string>${localAdminUser}</string>
</dict>
</plist>

Hello
You need to create elements at correct container. Like this.
set plist_file to (path to desktop)'s POSIX path & "example.plist"
--set plist_file to "~/desktop/example.plist"
tell application "System Events"
    tell (make new property list file with properties {name:plist_file})
        make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
        make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
        tell (make new property list item at end with properties {kind:list, name:"AdditionalUsers"})
            tell (make new property list item at end with properties {kind:record})
                make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
                make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
            end tell
        end tell
    end tell
end tell
Or you may create a record in AppleScript and set the value of plist file at once. Like this.
set plist_file to (path to desktop)'s POSIX path & "example.plist"
--set plist_file to "~/desktop/example.plist"
set dict to ¬
    {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} & ¬
    {|AdditionalUsers|:{¬
        {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} ¬
--set dict to {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}", |AdditionalUsers|:{{|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"}}}
tell application "System Events"
    tell (make new property list file with properties {name:plist_file})
        set value to dict
    end tell
end tell
Regards,
H
Message was edited by: Hiroto (PS. Fixed second script so that it uses the original case (uppercase) in key string)

How many DNS record need to create in Internal & external DNS server for exchange?

Hi friends,
I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
It's my first time configuring exchange for a organization.
Thanks & Regards,
Pradeep Chaugule

Hi,
Just as what ManU Philip said, you need to create
Autodiscovery.domaincom and mail.domain.com for external dns server.
Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
Refer from:
http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
Best Regards.

Do I need to create a view for this?

Hi Ihave got 2 tables emp and project
In emp tabe:
emp_no
family name
given name
In porgect table:
emp_no
status(assigned,unassigned)
start_date
end_date
emp_no Family_name given_name
1 Smith John
In project table same employee can have many assigement eg
emp_no status start_date end_date
1 assigned 01-may-08 01-july-08
1 assigned 01-sep-08 01-july-09
1 unassigned 01-july-09 01-oct-09
In the form:
there are 2 querable fields "project ends between field1(date) and field2(date)" which is used to
retrive records which have end date between field1 and field2.
The following fields are needed to get from database:
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Requirements:
1. project.start_date and project.end_date must be the latest project_end_date for the same emp
so in the above sample date
2. No. of time assigned is a count of total of number records which have status='assign'
So for the given sample data the record expected after query would be(field1=01-jun-08 field2=02-july-09)
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Smith John 01-sep-08 01-july-09 2
What is the best approach to get:
1 The lastest project(latest end_date) for the emp
2. get No.of time assigned.
Do I need to create a view for this? If yes, any sample sql code this this?
Thanks for your help

Hi W1zard,
Thanks for your reply. Could you clarify the following points for me:
1.) you could create a master block basing on your emp table and a detail block basing on your project table with the relation over emp_no. set the default_where clause of your detail block programmatically using
set_block_property('project', default_where, 'status = ''assigned'' and <your_date_criteria>');
Q1: where I pit this code? in pre-query trigger in detail block?
2.) Of course you could create a view to join both of your tables if you don't want to use master detail blocks; Also do the join over emp_no
create or replace force view v_emp as
select emp.family_name, emp.given_name, project.start_date, project.end_date
from emp, project
where emp.emp_no = project.emp_no
Q2 As I mentioned before, there are multipal entries for the same emp in project table and we only need the maching record from project table which has latest end_date. So I think I need something like
max(project.end_date) somewhere in create view to make sure only one record for one employee.
Also is there possible to include the no. of assigned field(select count(*) from project where status='assigned' and emp=emp_no) into the view as well?
Q3 All the fields mentioned above are diaplay-only. So Can I create a control block which has all the fields from emp and project. Then populate them with my sql. The question is
where I put this customerised sql so when user click excute query. My sql will run and display one the form?
REally appreciated your help!
Michael

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

Need to Create delivery on the basis of sales order and schedule line

Hi,
I need to create delivery on for sales order which is splitted in schedule line number (ETENR).
I am using FM RV_DELIVERY_CREATE and passing sales order number with single line item at a time for different (schedule line) VBEP-ETENR. but it is creating the delivery for all schedule line items in first time only and in second loop it is not returing any thing even error. can any one please suggest me urgently what can I do for it.

Hi Ankit,
You will have to create your own program to do this.
There is no standard way todo this.
Best regards,
Ramki

I need to create a fillable form and then generate a reports.

Hello everybody. I need to create a fillable form and then generate a report using numbers. You know, for example if you have customers, I need to be able to write the usual , name, last name, address, and some other details and then using a standard letter I would like the form to be able to populate these fields automatically in a standard pre formatted letter by our company and then be able to print it.
Any help to point me in the right direction I would appretiate very much.
I have iwork 9 installed in my macbook pro

This is acalled a mail merge and is solved using a combination of Numbers (or address book) and Pages. To get detailed help how to performa a mail merge start in Pages, then in the help menu type Mail Merge:
Also download the help files for Numbers and Pages here:
http://support.apple.com/manuals/#
Page 247 in the Pages User's Guide has details how to perform a a mail merge.
Post back with specific questions if you need to.
Regards,
Wayne

I need to create a PDF from InDesign that people can edit in Reader or Acrobat

I need to create a PDF from InDesign that people can edit (for example, change a name from "John" to "Johnny") from either Adobe Reader or Adobe Acrobat. I have already looked at forms, but they do not keep your font colors, faces, and sizes and just make everything that is selected as a text form Black, 12pt, Times New Roman.
Can anyone here help me?

Vincent,
If you use Acrobat pro, generate your .pdf file and then save it as (french version):
... so that anyone using Acrobat Reader (or Pro, of course) can modify the .pdf file (with limitations), add comments, ...
If you want to try to "protect" your .pdf file, you can try with this (in the "Préférences" menu (french version)):

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

Need to create a rifle scope POV in FCP5

Similar Messages

Maybe you are looking for