Need to create a weekly chart - need to create a mock crosstab
Post Author: LcdCyn
CA Forum: Charts and Graphs
I am creating a weekly chart showing ClearQuest records in a certain state over a 3 month interval. I need to show every week in that 3 month interval even if there is no change in Defects that week.
I will not be able to reference any files with weekly dates in it because, this is will something available via a ClearQuest report format.
Note that I able to create functions with each weekly date and totals (separate functions for each week) in Crystal. Is there any way I can use this data to create a trend chart?
I have been reading about a mock crosstab. It sounds perfect for what I read. Can I create a mock crosstab based on my functions and ClearQuest data to be used for my charts?
If so, I have Crystal Reports 10 Professional Edition. Is there an example or documentation that tells you how to create a mock (or manual) crosstab?
Post Author: miwalker
CA Forum: Charts and Graphs
I'm trying to also figure out how to save the weekly totals for each State (ex. Open, Working, Verify, Closed). I can get it to work for CurrentDate or CreatedDate because that date is saved in my db, but would rather have totals for each State for each week of the year.
I would appreciate it if someone could please share how they accomplished this. Thanks in advance.
Open Working Verify Closed
01/01/2008 20 10 14 55
01/08/2008 14 15 6 75
01/15/2008 12 14 4 82
Similar Messages
-
Anybody successfully created a Pie-chart?
I have tried with all the default options and keep getting
an "x"( the one that's shown by browser when it can't find an image file).
I understand the fact that Pie-Charts are still in Beta.
But at least they should work to have a successful look at them.
Or am I missing some important settings in Apache/Portal/Admin
that are masking this output?
These charts are one of the important criteria for us to continue using Portal.
Thank you verymuch.
MadhavHi Madhav ,
I agree with you
Pie charts is a beta version even in 3.0.9 .It is not possible to create the pie chart(you can create other charts) .If some body has any version more than 3.0.9 ,i don't know .the only way to show up pie charts may be to use seperate table and up load the pie charts and view them ,but not through the regular create components way.
Thanks
Vishnu Singireddy -
Need help in creating a Waterfall Chart
Hi,
I have a requirement where in which I need to create a waterfall chart. In this chart we need the sales value for a Brand for two years, (say 2010 and 2009) and also need to plot the growth of the various sub-brands that come under that brand. Some dummy
data to explain my scenario follows.
MAT 09
MAT 10
Brand
1400
1450
Sub Brand 1
300
400
Sub Brand 2
400
500
Sub Brand 3
500
300
Sub Brand 4
100
50
Sub Brand 5
100
200
In my chart it has to be a vertical bar chart, 1st line should be MAT 09, then the growth values should be plotted, but the axis for that will not be 0, rather start at the value of MAT09.
I am unable to paste a dummy chart here. :(
Can anyone throw any inputs as to how it can be achieved.
Thanks in Advance,
Suman SarkarHi Suman Sarkar,
I am a little confused about the layout of your waterfall chart, could you please post some dummy chart here, with a clear
understanding with the issue, we could give some solution or workarounds, the steps of uploading the picture are following:
1.
Upload the picture to a website
http://skydriver.live.com
2.
View the picture in the website.
3.
Right-click the picture, and then select “Copy”
4.
In reply window, select “Paste” to paste the picture into a post.
If you have any question about the steps, please feel free to ask.
Regards,
Challen Fu -
I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?
Hello, thanks for replying.
Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on. -
I can't open a file I just created a week ago and it says pages needs to be updated to open the file but its up to date, what do I do?
You have 2 versions of Pages on your Mac.
Pages 5.2.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
Or you can archive Pages 5 so that it doesn't automatically open.
If you are unhappy about this review/rate Pages 5 in the App Store.
Peter -
Hi,
I need to create a flash chart that would take data dynamicaly
as in this link http://ajaxian.com/archives/hummingbird-real-time-view-of-your-web-traffic
Thanks
UdayWhat aspects of creating such a chart are you unable to manage?
-
Need help creating a bubble chart
Hi all;
I am trying to create a bubble chart using the voting data from Eurovision. In this data there are 37 countries that rank the 26 final countries with a score of 1 to 26 (and no vote for themselves). So the data looks like this (full
spreadsheet here):
Albania
Armenia
Austria
Ukraine
19
20
6
Belarus
23
3
19
Azerbaijan
15
25
20
Iceland
24
5
12
Norway
20
18
11
Romania
16
17
5
The column Albania is the votes from Albania. The row Ukraine is the placement each country gave Ukraine. In the example above Albania put Ukraine in 19th place.
What I want for a bubble chart is the Y axis is the placement (or score). The X axis is the list of countries receiving votes. And the size of the bubble is the number of countries giving that score to the country. So if Albania is the only country giving
Ukraine 19th place, then there is a bubble with a radius of 1 in the Ukraine column at the Y axis of 19. If there are three countries giving Ukraine 19th place, then the bubble has a radius of 3.
And if possible, for each bubble that has more than 1 country giving a vote at that point, the bubble is a pie chart showing the countries giving that vote.
Is this doable? And if so, how?
If not, how should I set up this data?
thanks - dave
ps - For the curious, this is a follow on to
this article.
Who will win
The Windward International Collegiate Programming Championships?Hi Herbert;
Thank you. Unfortunately a display like that does not get across what is happening to most people. For the case of presenting the vote results to a wide number of readers we've found that a spreadsheet of numbers, no matter how clear the results are to us,
have no impact with most readers.
Is there any way to do this with a bubble chart?
thanks - dave
Who will win
The Windward International Collegiate Programming Championships? -
Health app charts need some work!
When I click on a day in the weekly chart for "walking +running" it takes me to a list of all data points for the day, shouldn't it take me to a new chart with a breakdown of the day's activity? is this a feature that hasn't been implemented yet? Also, why is the weekly chart so hard to read? I find it hard to see how many miles I've done per day in the week, perhaps the x,y axis needs a little bit more detail? Anyone have some suggestions? thanks!
Give Apple feedback at http://www.apple.com/feedback as that is the way to push for features or functionality improved.
-
Need help returning correct name from a code created movie clip
Hello. I am an AS3 n00b with hopefuly a simple question I am designing a simple game in flash. This code creates an array of movie clips and asigns a picture to each one. It is a map screen. What I need is when I click on one of the created movie clips, I need it to return either the index of the clip in the array or the name of the clip. Basicaly anything I can use to tell them apart in the code. Here is the code:
import flash.display.MovieClip;
var MapLoader:Array = new Array();
var strJPGext:String = ".jpg";
var intContTileNumber:int;
var strContTilePath:String;
var intDistStartX:int = 63;
var intDistStartY:int = 64;
var intDistMultiplyY:int = 0;
var intDistMultiplyX:int = 0;
var intDistCount:int = 0;
var MapSquare:Array = new Array();
for (var i:int = 0; i < 729; i++)
//var MapSquare:MovieClip = new MovieClip();
MapSquare.push (new MovieClip());
MapSquare[i].x = intDistStartX + (intDistMultiplyX * 30);
MapSquare[i].y = intDistStartY + (intDistMultiplyY * 30);
MapSquare[i].name = "MapSquare" + i ;
addChild(MapSquare[i]);
intContTileNumber = i;
MapLoader.push (new Loader);
strContTilePath = intContTileNumber + strJPGext;
MapLoader[i].load(new URLRequest(strContTilePath));
MapSquare[i].addChild(MapLoader[i]);
intDistCount++;
intDistMultiplyX++;
if (intDistCount > 26){
intDistCount = 0;
intDistMultiplyX = 0;
intDistMultiplyY++;
stage.addEventListener(MouseEvent.CLICK, reportClick);
function reportClick(event:MouseEvent):void
trace("movieClip Instance Name = " + event.target.name);
Now all this works fine, it creates the map and assigns the correct picture and places them in the correct X,Y position and it is the correct grid of 27x27 squares. The problem is with the name, when I click on the movie clip, it returns "Instance2" or "Instance5" or whatever. It starts with 2 and then increases each number by 3 for each clip, so the first one is 2, then 5 then 8 and so on. This is no good. I need it to return the name that I assigned it
. If I put the code in trace(MapSquare[1]) it will return the name "MapSquare1" so I know the name was assigned, but it isnt returning.
Please assist
Thanks,
-redThanks for the resopnse,
I know I dont really need the name, I just need the index number of the array, but I cant figure out how to get the index name without specificaly coding for it. That is why in the listener event I use event.target.name because I dont know what movie clip is being clicked until it has been clicked on. Basically when a movie clip is clicked it needs to return which index of the array was clicked.
I could do it this way:
MapSquare[0].addEventListener(
MouseEvent.MOUSE_UP,
function(evt:MouseEvent):void {
trace("I've been clicked!");
MapSquare[1].addEventListener(
MouseEvent.MOUSE_UP,
function(evt:MouseEvent):void {
trace("I've been clicked!");
MapSquare[2].addEventListener(
MouseEvent.MOUSE_UP,
function(evt:MouseEvent):void {
trace("I've been clicked!");
... ect
but that is unreasonable and it kind of defeats the purpose of having the array in the first place. The code that each movie clip executes is the same, eventualy that index will be passed into a database and the data at that primary key will be retrieved and returned to the program. So I just need to know, when one of those buttons is clicked, which one was clicked and what is its index in the array.
I am a VB programer and in VB this is very easy, the control array automatically sends its own index into the function when one of the buttons is clicked. It seems simple enough, I just dont know how to do it in action script.
Thanks again,
-red -
How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?
Hello Arthur,
Thank you for the reply.
You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD , pen and paper and CDs .
Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
Thanks
Amanda -
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
Ihave created a script, i need to email in pdf format.
Hi Experts,
There are 2 criterias...
1. criteria
I have created a script, i need to mail it. Please give me a step by step guide to perform it .. . Please give the comments in all the functional module to be used.
Do we have to write a separate program to send email or in the same program. i'll post my program along with this mail. I'm using this program to display report after delivery on that particular date.
REPORT ZREPORTTOEMAIL LINE-SIZE 400.
data : count, i type i.
TABLES : VBFA, "Sales Document Flow
VBAK,
KNA1,
VBKD,
VBAP,
LIPS,
LIKP,
KONP,
KOMK,
KOMP,
zkna1,
konv.
data : l_vbeln like vbfa-vbeln,
l_posnr like vbfa-posnn,
l_KNUMV like vbak-KNUMV,
L_BILL_ITEM LIKE vbfa-posnn ,
l_netwr like vbrp-netwr,
l_MWSBP like vbrp-mwsbp.
DATA: BEGIN OF TKOMV OCCURS 50.
INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
HEADING TYPE SLIS_T_LISTHEADER,
LAYOUT TYPE SLIS_LAYOUT_ALV,
EVENTS TYPE SLIS_T_EVENT,
REPNAME LIKE SY-REPID,
F2CODE LIKE SY-UCOMM VALUE '&ETA',
G_SAVE(1) TYPE C,
G_EXIT(1) TYPE C,
G_VARIANT LIKE DISVARIANT,
GX_VARIANT LIKE DISVARIANT.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA: BEGIN OF itab occurs 0,
kunnr like likp-kunnr, "ship to party
NAME2 LIKE KNA1-NAME1, "text
ORT01 LIKE KNA1-ORT01, "City
BSTNK LIKE VBAK-BSTNK, "customer P O
BSTDK LIKE VBAK-BSTDK, "date
vbeln like likp-vbeln, "delivery
ernam like likp-ernam, "person
vstel like likp-vstel, "shipping point
vkorg like likp-vkorg, "sales org
lfdat like likp-lfdat, "delivery date
kunag like likp-kunag, "sold to party
NAME1 LIKE KNA1-NAME1, "text
bil_to like VBAK-KUNNR,
name3 like kna1-name1,
traid like likp-traid, "transport/vehicle no
BOLNR LIKE LIKP-BOLNR,
wadat_ist like likp-wadat_ist, "good mov. date
posnr like lips-posnr, "item
matnr like lips-matnr, "material
arktx like lips-arktx, "item text
matkl like lips-matkl, "mat group
werks like lips-werks, "plant
lgort like lips-lgort, "stoage location
lfimg like lips-lfimg, "del qty
MEINS LIKE LIPS-MEINS,
vrkme like lips-vrkme, "sales unit
UMVKZ LIKE LIPS-UMVKZ,
UMVKN LIKE LIPS-UMVKN,
charg like lips-charg, "batch
vgbel like lips-vgbel, "reference doc
mtart like lips-mtart, "mat type
vkbur like lips-vkbur, "sales office
vkgrp like lips-vkgrp, "sales group
vtweg like lips-vtweg, "Distribution Channel
spart like lips-spart, "division
billno like vbak-vbeln,
basic like komvd-kwert,
budat like bkpf-budat,
fin_amt like vbrp-NETWR,
END OF itab.
data : begin of jtab occurs 0,
kunnr like likp-kunnr,
name2 like kna1-name2,
vbeln like likp-vbeln,
zkunnr like zkna1-zkunnr,
zname like zkna1-zname,
end of jtab.
SELECTION-SCREEN SKIP 1 .
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE TEXT-003.
SELECT-OPTIONS : ABC FOR LIKP-WADAT_IST DEFAULT SY-DATUM
NO INTERVALS .
SELECT-OPTIONS : S_MATNR FOR LIPS-MATNR NO INTERVALS .
SELECT-OPTIONS : S_VKORG FOR LIKP-VKORG NO INTERVALS.
SELECT-OPTIONS : S_VSTEL FOR LIKP-VSTEL NO INTERVALS.
SELECT-OPTIONS : S_VKBUR FOR LIKP-VKBUR NO INTERVALS.
SELECT-OPTIONS : S_VKGRP FOR LIPS-VKGRP.
SELECT-OPTIONS : S_SPART FOR LIPS-SPART.
SELECT-OPTIONS : S_VBELN3 FOR LIKP-VBELN.
SELECT-OPTIONS : S_MATKL FOR LIPS-MATKL NO INTERVALS,
S_KUNAG FOR LIKP-KUNAG.
SELECTION-SCREEN END OF BLOCK BLOCK1.
select * from likp into corresponding fields of itab
WHERE WADAT_IST IN ABC
AND VBELN IN S_VBELN3
AND VKORG IN S_VKORG
and VSTEL in S_VSTEL
AND VKBUR IN S_VKBUR
and lfart like 'Z%'
AND VBTYP = 'J'
AND KUNAG IN S_KUNAG.
select * from lips into corresponding fields of itab
WHERE VBELN = ITAB-VBELN
AND MATNR IN S_MATNR
AND MATKL IN S_MATKL
AND VKBUR IN S_VKBUR
AND VKGRP IN S_VKGRP
AND SPART IN S_SPART.
IF ITAB-VRKME = 'RM' AND ITAB-MEINS = 'KG'.
ITAB-LFIMG = ITAB-LFIMG * ( ITAB-UMVKZ / ITAB-UMVKN ).
ITAB-VRKME = 'KG'.
ENDIF.
SELECT SINGLE BSTNK BSTDK INTO (ITAB-BSTNK,ITAB-BSTDK) FROM VBAK
WHERE VBELN = ITAB-VGBEL.
SELECT SINGLE NAME1 ORT01 FROM KNA1 INTO (ITAB-NAME2,ITAB-ORT01)
WHERE KUNNR = ITAB-KUNNR.
SELECT SINGLE NAME1 FROM KNA1 INTO ITAB-NAME1
WHERE KUNNR = ITAB-KUNAG.
*select single vbeln POSNN into (itab-billno,L_BILL_ITEM) from vbfa where VBELV = itab-vbeln
*and POSNV = itab-posnr and VBTYP_N in ('M','U').
select vbeln POSNN from vbfa up to 1 rows into (itab-billno,L_BILL_ITEM) where VBELV = itab-vbeln
and POSNV = itab-posnr and VBTYP_N in ('M','U') order by vbeln DESCENDING .
endselect.
select single * from vbfa where vbelv = itab-billno and posnv = l_bill_item and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : itab-billno, l_bill_item.
endif.
select single budat from bkpf into itab-budat where xblnr = itab-billno and
blart = 'RV'.
select single NETWR MWSBP into (l_netwr, l_MWSBP) from vbrp where vbeln = itab-billno
and posnr = l_bill_item.
itab-fin_amt = l_netwr + l_MWSBP.
clear : l_netwr, l_MWSBP.
select single kunnr from vbpa into itab-bil_to where
vbeln = itab-BILLNO and PARVW = 'RE'.
select single name1 into itab-name3 from kna1
where kunnr = itab-bil_to.
*select single VBELV POSNV from vbfa into (l_vbeln,l_posnr)
*where VBELN = itab-vbeln and
*POSNN = itab-posnr and VBTYP_N = 'J'.
*select single VBELN POSNN from vbfa into (l_vbeln,l_posnr)
*where VBELV = itab-vbeln and
*POSNV = itab-posnr and VBTYP_N = 'M'.
select VBELN POSNN from vbfa up to 1 rows into (l_vbeln,l_posnr)
where VBELV = itab-vbeln and
POSNV = itab-posnr and VBTYP_N = 'M' order by vbeln DESCENDING.
endselect.
select single * from vbfa where vbelv = l_vbeln and posnv = l_posnr and
vbtyp_n = 'N'.
if sy-subrc = 0.
clear : l_vbeln, l_posnr.
endif.
if sy-subrc = 0.
*select single KNUMv into l_KNUMv from vbak where vbeln = l_vbeln
select single KNUMv into l_KNUMv from vbRk where vbeln = l_vbeln
select * from konv where knumv = l_knumv and kposn = l_posnr and
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
else.
*select single KNUMv into l_KNUMv from ekko where ebeln = itab-vgbel.
*select single KBETR from konv into itab-basic where knumv = l_knumv
*and kposn = itab-posnr and kschl = 'P101'.
select single KNUMv into l_KNUMv from VBRK where VBELN = itab-BILLNO.
select * from konv where knumv = l_knumv and kposn = l_BILL_ITEM AND
kschl in ('ZR00','ZR01','ZR02','ZOBC').
itab-basic = itab-basic + KONV-KBETR.
ENDSELECT.
*zkna1-zkunnr = itab-kunnr.
*insert zkna1.
endif.
clear : l_vbeln, L_BILL_ITEM, L_POSNR.
APPEND ITAB.
clear : itab-basic, itab-lfimg.
ENDSELECT.
clear : itab.
ENDSELECT.
<b>perform zscript.</b>
*& Form zscript
text
--> p1 text
<-- p2 text
FORM zscript .
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'ZREPORT2EMAIL'
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'MANU'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " zscript
The above one is first criteria just to understand how to send mail to the customers.
<b>Second criteria</b> is i have to send the mail to the particular customer with only their details, the process should continue until it sends to all the customers with their details for that particular date.
Please help me out.
I have seen so many posts in the sdn but not able to understand the functional modules, how they declare that and how does it works...
Please provide me a good material to understand the functional module and to declare them.
Please solve this query i'll reward them with very good points.
Thanks in advance.
A.Rafique.Hi babar haroon,
Thanks for the link.....
I went through that link, i created smart form but i was not able to get the results because the pgm gets terminated after executing. I'll show u the code, the code is active. Please check out and tell me if i have missed anything in the code...
*& Report ZZZ_TEST3
REPORT ZZZ_TEST3.
*internal table declarations
data: i_otf type itcoo occurs 0 with header line,
i_tline type table of tline with header line,
i_receivers type table of somlreci1 with header line,
i_record like solisti1 occurs 0 with header line,
*Objects to send mail.
i_objpack like sopcklsti1 occurs 0 with header line,
i_objtxt like solisti1 occurs 0 with header line,
i_objbin like solisti1 occurs 0 with header line,
i_reclist like somlreci1 occurs 0 with header line,
*workarea declaration.
w_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
w_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
*call function '/1BCDWB/SF00000105'
exporting
formname = 'ZZZ_TEST2'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION '/1BCDWB/SF00000105'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB = itab1
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = wa
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING '~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~'.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
DESCRIBE TABLE i_objbin LINES v_lines_txt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'J.Jayanthi'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_hex = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please reply me back, it is very urgent..
Thanks and regards.
A.Rafique -
Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy
Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.
-
Do i need acrobat pro to open a pdf i created in quark and reduce the file size?
do i need acrobat pro to open a pdf i created in quark and reduce the file size?
i'll try that! thank you.
Daniel Flavin <mailto:[email protected]>
June 24, 2014 at 3:23 PM
>
do i need acrobat pro to open a pdf i created in quark and
reduce the file size?
created by Daniel Flavin
<https://forums.adobe.com/people/Daniel+Flavin> in /Creating, Editing
& Exporting PDFs/ - View the full discussion
<https://forums.adobe.com/message/6493113#6493113> -
HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE
HAI FRIENDS
1 I WANT TO KNOW HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE IN ABAP
2 NEED ABAP PROGRAM EBOOK
PLZ DO ITCHECK THIS ALV DRILL DOWN REPORT
*& Report ZHAI_SD_CUSTOMER_DETAILS_ALV
REPORT ZHAI_SD_CUSTOMER_DETAILS_ALV.
TYPE-POOLS: SLIS.
TYPES DECLARATIONS
TABLES : KNA1.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
LAND1 LIKE KNA1-LAND1,
ORT01 LIKE KNA1-ORT01,
STRAS LIKE KNA1-STRAS,
PSTLZ LIKE KNA1-PSTLZ,
END OF IT_CUST.
DATA:BEGIN OF IT_SALE OCCURS 0,
VBELN LIKE VBAK-VBELN,"SALES DOC NO
AUDAT LIKE VBAK-AUDAT,"DATE RECIEVED AND SENT
AUART LIKE VBAK-AUART,"SALES DOC LIKE
NETWR LIKE VBAK-NETWR,"NET VALUE IN DOC CURRENCY
KUNNR LIKE VBAK-KUNNR,
END OF IT_sale.
TYPES: BEGIN OF TY_ITEM,
VBELN TYPE VBAP-VBELN,
POSNR TYPE VBAP-POSNR,"ITEM NO
MATNR TYPE VBAP-MATNR,"MATERIAL NO
CHARG TYPE VBAP-CHARG,"BATCH
MATKL TYPE VBAP-MATKL,"MATERIAL GROUP
MEINS TYPE VBAP-MEINS,"BASE UNIT OF MEASURE
END OF TY_ITEM.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
INTERNAL TABLES
DATA:
IT_CUST TYPE TABLE OF TY_CUST,
IT_SALE TYPE TABLE OF TY_SALE,
IT_ITEM TYPE TABLE OF TY_ITEM.
INTERNAL TABLES FOR ALV
DATA: IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FCAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_FCAT3 TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_EVENTS TYPE TABLE OF slis_alv_event,
IT_EVENTS1 TYPE TABLE OF SLIS_ALV_EVENT,
IT_EVENTS2 TYPE TABLE OF SLIS_ALV_EVENT.
DATA: IT_LISTHEADER1 TYPE SLIS_T_LISTHEADER,
IT_LISTHEADER TYPE TABLE OF slis_listheader,
IT_LISTHEADER3 TYPE TABLE OF SLIS_LISTHEADER,
IT_FOOTER TYPE TABLE OF SLIS_LISTHEADER.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT LIKE LINE OF IT_SORT.
WORK AREAS FOR ALV
DATA: WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV,
WA_FCAT LIKE LINE OF IT_FCAT,
WA_FCAT1 LIKE LINE OF IT_FCAT1,
WA_FCAT3 LIKE LINE OF IT_FCAT3,
WA_EVENTS LIKE LINE OF IT_EVENTS,
WA_EVENTS1 LIKE LINE OF IT_EVENTS,
WA_EVENTS2 LIKE LINE OF IT_EVENTS.
WORK VARIABLES
DATA: W_REPID TYPE SY-REPID,
W_KUNNR TYPE KNA1-KUNNR.
$$**----
WORK AREAS
MACROS
DEFINE ADD_FCAT1..
WA_FCAT1-COL_POS = &1.
WA_FCAT1-FIELDNAME = &2.
WA_FCAT1-TABNAME = &3.
WA_FCAT1-REF_TABNAME = &4.
WA_FCAT1-KEY = &5.
WA_FCAT1-DO_SUM = &6.
WA_FCAT1-HOTSPOT = &7.
WA_FCAT1-EMPHASIZE = &8.
APPEND WA_FCAT1 TO IT_FCAT1.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM F_GET_DATA.
PERFORM F_BUILD_FCAT.
PERFORM F_GET_EVENTS.
PERFORM F_BUILD_LAYOUT USING WA_LAYOUT.
PERFORM F_GET_DISPLAY.
*& Form F_GET_DATA
FORM F_GET_DATA .
SELECT KUNNR
NAME1
LAND1
ORT01
STRAS
PSTLZ FROM KNA1
INTO TABLE
IT_CUST WHERE KUNNR IN S_KUNNR.
ENDFORM. " F_GET_DATA
*& Form F_GET_DISPLAY
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY .
CLEAR W_REPID.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'DUCK'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_CUST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY
*& Form F_GET_EVENTS
text
--> p1 text
<-- p2 text
FORM F_GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'TOP_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_TOP_OF_PAGE'.
MODIFY IT_EVENTS INDEX SY-TABIX FROM
WA_EVENTS TRANSPORTING FORM.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_USER_COMMAND'.
MODIFY IT_EVENTS FROM WA_EVENTS INDEX
SY-TABIX TRANSPORTING FORM.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS WITH
KEY NAME = 'END_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_END_OF_PAGE'.
MODIFY IT_EVENTS FROM WA_EVENTS
INDEX SY-TABIX TRANSPORTING FORM.
ENDIF.
ENDFORM. "F_GET_EVENTS
*& Form F_BUILD_LAYOUT
FORM F_BUILD_LAYOUT USING P_WA_LAYOUT LIKE WA_LAYOUT .
CLEAR P_WA_LAYOUT.
P_WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
*P_WA_LAYOUT-F2CODE = '&ETA'.
*p_wa_layout-detail_popup = 'X'.
P_WA_LAYOUT-DETAIL_TITLEBAR = 'ALV REPORT'.
*P_WA_LAYOUT-CONFIRMATION_PROMPT = 'X'.
ENDFORM. " F_BUILD_LAYOUT
*& Form F_TOP_OF_PAGE
FORM F_TOP_OF_PAGE .
refresh it_listheader.
DATA: LS_LIST TYPE SLIS_LISTHEADER.
LS_LIST-TYP = 'H'.
LS_LIST-INFO = TEXT-004.
APPEND LS_LIST TO IT_LISTHEADER.
LS_LIST-typ = 'S'.
LS_LIST-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO LS_LIST-info. "todays date
append LS_LIST to IT_LISTHEADER.
clear: LS_LIST.
LS_LIST-TYP = 'S'.
LS_LIST-KEY = 'DEVELOPED:'.
LS_LIST-INFO = SY-UNAME.
APPEND LS_LIST TO IT_LISTHEADER.
CLEAR LS_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
I_LOGO = 'GLOBAL'.
ENDFORM. " F_TOP_OF_PAGE
*& Form F_BUILD_FCAT
FORM F_BUILD_FCAT .
CLEAR: W_REPID,
IT_FCAT.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = W_REPID
I_INTERNAL_TABNAME = 'IT_CUST'
I_INCLNAME = W_REPID
CHANGING
CT_FIELDCAT = IT_FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_BUILD_FCAT
*& Form F_USER_COMMAND
FORM F_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
IF RS_SELFIELD-FIELDNAME = 'KUNNR'.
READ TABLE IT_CUST
INDEX RS_SELFIELD-TABINDEX.
MOVE rs_selfield-value TO W_KUNNR.
IF IT_CUST IS NOT INITIAL.
PERFORM F_GET_SECONDARY_DATA.
PERFORM F_BUILD_FCAT1.
PERFORM F_BUILD_EVENTS.
PERFORM F_GET_SORT.
PERFORM F_BUILD_LAYOUT1.
PERFORM F_GET_DISPLAY1.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " F_USER_COMMAND
*& Form F_GET_SECONDARY_DATA
FORM F_GET_SECONDARY_DATA .
data:v_data.
SELECT VBELN
AUDAT
AUART
NETWR
KUNNR FROM VBAK INTO TABLE IT_SALE
WHERE KUNNR EQ IT_CUST-KUNNR.
IF IT_SALE[] IS INITIAL .
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = SY-REPID
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'NO SALES FOR THIS CUSTOMER'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
ANSWER = v_data
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
case v_data.
when '2'.
leave screen.
when 'A'.
leave to screen '0'.
endcase.
ENDIF.
ENDFORM. " F_GET_SECONDARY_DATA
*& Form F_BUILD_FCAT1
FORM F_BUILD_FCAT1 .
REFRESH IT_FCAT1.
CLEAR WA_FCAT1.
ADD_FCAT1:
'1' 'VBELN' 'VBAK' 'VBAK' 'X' ' ' 'X' 'C500',
'2' 'AUDAT' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C400',
'3' 'AUART' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C100',
'4' 'NETWR' 'VBAK' 'VBAK' ' ' 'X' ' ' 'C300'.
ENDFORM. " F_BUILD_FCAT1
*& Form F_GET_DISPLAY1
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND1'
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE1'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = IT_FCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS1
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SALE
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY1
*& Form F_BUILD_EVENTS
FORM F_BUILD_EVENTS .
clear wa_events1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS1.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS1.
read table It_events1 with key name = 'TOP_OF_PAGE'
into WA_eventS1.
if sy-subrc = 0.
move 'F_TOP_OF_PAGE1' to WA_EventS1-form.
append WA_eventS1 to it_events1.
endif.
READ TABLE IT_EVENTS WITH KEY NAME = 'USER_COMMAND'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_USER_COMMAND1' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
*READ TABLE IT_EVENTS WITH KEY NAME = 'SUBTOTAL_TEXT'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_SUBTOTAL_TEXT' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
ENDFORM. " F_BUILD_EVENTS
*& Form F_TOP_OF_PAGE1
FORM F_TOP_OF_PAGE1 .
DATA: LS_HEADER TYPE SLIS_LISTHEADER.
REFRESH : IT_LISTHEADER1.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'SALES ORDER DETAILS FOR CUSTOMER'.
APPEND LS_HEADER TO it_listheader1.
CLEAR LS_HEADER.
LS_HEADER-TYP = 'S'.
LS_HEADER-KEY = 'CUSTOMER NO:'.
LS_HEADER-INFO = W_KUNNR.
APPEND LS_HEADER TO IT_LISTHEADER1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER1
I_LOGO = 'DUCK'
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. " F_TOP_OF_PAGE
*& Form F_END_OF_PAGE
text
--> p1 text
<-- p2 text
FORM F_END_OF_PAGE .
DATA:LS_FOOTER TYPE SLIS_LISTHEADER.
LS_FOOTER-TYP = 'S'.
LS_FOOTER-KEY = SY-UNAME.
LS_FOOTER-INFO = 'DEVELOPED BY:'.
APPEND LS_FOOTER TO IT_FOOTER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_FOOTER
ENDFORM. " F_END_OF_PAG
*& Form F_USER_COMMAND1
text
--> p1 text
<-- p2 text
FORM F_USER_COMMAND1 USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_SALE INDEX RS_SELFIELD-TABINDEX.
PERFORM F_GET_SECONDARY2.
PERFORM F_GET_FCAT3 USING:
'VBELN' '1' 'C' '12' 'SALES_DOC' 'M' 'VBAP' 'X' 'C51' ' ',
'POSNR' '2' ' ' '5' 'ITEM_NO' 'M' 'VBAP' ' ' 'C61' ' ',
'MATNR' '3' ' ' '12' 'MATERIAL_NO' 'M' 'VBAP' ' ' 'C71' ' ',
'CHARG' '4' ' ' '10' 'BATCH_NO' 'M' 'VBAP' ' ' 'C41' ' ',
'MATKL' '5' ' ' '10' 'MAT_GROUP' 'M' 'VBAP' ' ' 'C31' ' ',
'MEINS' '6' ' ' '12' 'BASE_UNIT' 'M' 'VBAP' ' ' 'C21' 'X' .
PERFORM F_GET_EVENTS2 USING WA_EVENTS2
CHANGING IT_EVENTS2.
PERFORM F_GET_DISPLAY3.
REFRESH IT_FCAT3.
ENDCASE.
ENDFORM. " F_USER_COMMAND1
*& Form F_GET_SECONDARY2
text
--> p1 text
<-- p2 text
FORM F_GET_SECONDARY2 .
SELECT VBELN
POSNR
MATNR
MATKL
MEINS
FROM VBAP INTO
TABLE IT_ITEM WHERE
VBELN EQ IT_SALE-VBELN.
IF SY-DBCNT EQ 0.
MESSAGE E000(ZHAI) WITH TEXT-KO1.
ENDIF.
ENDFORM. " F_GET_SECONDARY2
*& Form F_GET_DISPLAY3
text
--> p1 text
<-- p2 text
FORM F_GET_DISPLAY3 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'F_PF_STATUS'
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'F_TOP_OF_PAGE3'
I_CALLBACK_HTML_TOP_OF_PAGE = 'F_TOP_OF_PAGE3'
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FCAT3
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS2
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_ITEM
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_GET_DISPLAY3
*& Form F_GET_FCAT3
FORM F_GET_FCAT3 USING VALUE(P1)
VALUE(P2)
VALUE(P3)
VALUE(P4)
VALUE(P5)
VALUE(P6)
VALUE(P7)
VALUE(P8)
VALUE(P9)
VALUE(P10).
CLEAR WA_FCAT3.
WA_FCAT3-FIELDNAME = P1.
WA_FCAT3-COL_POS = P2.
WA_FCAT3-JUST = P3.
WA_FCAT3-OUTPUTLEN = P4.
WA_FCAT3-SELTEXT_M = P5.
WA_FCAT3-DDICTXT = P6.
WA_FCAT3-REF_TABNAME = P7.
WA_FCAT3-HOTSPOT = P8.
WA_FCAT3-EMPHASIZE = P9.
WA_FCAT3-DO_SUM = P10.
APPEND WA_FCAT3 TO IT_FCAT3.
ENDFORM. " F_GET_FCAT3
*& Form F_BUILD_LAYOUT1
text
--> p1 text
<-- p2 text
FORM F_BUILD_LAYOUT1 .
WA_LAYOUT1-totals_text = 'TOTAL'.
wa_layout1-detail_popup = 'X'.
ENDFORM. " F_BUILD_LAYO
*& Form F_GET_EVENTS2
text
-->P_IT_EVENTS2 text
<--P_WA_EVENTS2 text
FORM F_GET_EVENTS2 USING VALUE(P_WA_EVENTS2) LIKE WA_EVENTS2
CHANGING P_IT_EVENTS2 LIKE IT_EVENTS2.
P_WA_EVENTS2-NAME = 'HTML_TOP_OF_PAGE'.
P_WA_EVENTS2-FORM = 'F_TOP_OF_PAGE3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'PF_STATUS'.
P_WA_EVENTS2-FORM = 'F_PF_STATUS'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'USER_COMMAND'.
P_WA_EVENTS2-FORM = 'F_USER_COMMAND3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
p_wa_events2-name = 'HTML_END_OF_LIST'.
P_WA_EVENTS2-FORM = 'F_HTML_END_OF_LIST'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR p_wa_events2.
ENDFORM. " F_GET_EVENTS2
*& Form F_TOP_OF_PAGE3
text
--> p1 text
<-- p2 text
FORM F_TOP_OF_PAGE3 USING DOCUMENT TYPE REF TO cl_dd_document .
data : link_area type ref to cl_dd_area,
picture_area type ref to cl_dd_area.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
TEXT = 'ALV REPORT'
TEXT_TABLE =
FIX_LINES =
SAP_STYLE =
SAP_COLOR = cl_dd_area=>list_background_int
SAP_FONTSIZE = 'LARGE'
SAP_FONTSTYLE = 'TIMES'
SAP_EMPHASIS = 'STRONG'
STYLE_CLASS =
CHANGING
DOCUMENT =
CALL METHOD DOCUMENT->NEW_LINE.
CALL METHOD DOCUMENT->ADD_PICTURE
EXPORTING
PICTURE_ID = 'LOGO1'
WIDTH = '10%'
ENDFORM. " F_TOP_OF_PAGE3
*& Form F_GET_SORT
text
--> p1 text
<-- p2 text
FORM F_GET_SORT .
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = 4.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " F_GET_SORT
*& Form F_PF_STATUS
text
--> p1 text
<-- p2 text
FORM F_PF_STATUS USING RS_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'ZHAIALV' EXCLUDING RS_EXTAB.
ENDFORM. " F_PF_STATUS
*& Form F_USER_COMMAND3
text
--> p1 text
<-- p2 text
FORM F_USER_COMMAND3 USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&SALE'.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
SET parameter ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&MAT'.
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
SET PARAMETER ID 'MAT' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM. " F_USER_COMMAND3
*& Form F_HTML_END_OF_LIST
text
--> p1 text
<-- p2 text
FORM F_HTML_END_OF_LIST USING DOCUMENT TYPE REF TO CL_DD_DOCUMENT.
DATA : PAGE TYPE SDYDO_TEXT_ELEMENT.
MOVE SY-PAGNO TO PAGE.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
TEXT = PAGE
TEXT_TABLE =
FIX_LINES =
SAP_STYLE =
SAP_COLOR =
SAP_FONTSIZE =
SAP_FONTSTYLE =
SAP_EMPHASIS =
STYLE_CLASS =
CHANGING
DOCUMENT =
ENDFORM. " F_HTML_END_OF_LIS
Maybe you are looking for
-
Replacing a failing hard drive with a new Hard
Hey Apple Community, So I have a failing hard drive in my mid-2009 Macbook Pro. I can't boot it up in regular mode any longer, and only can boot it in Recovery HD. I cannot repair the disk, so I guess my only option is to replace the hard drive. I de
-
Course Appraisal Extraction in HCM
Hi, I am trying to extract course appraisals from my ECC 5.0 / HCM (I think it's 2.0 EA-HR is SAPKGPHC15) / LSOFE 300 system, into my BI 3.5.3 system but can't. I can pull the Personnel Appraisals at will using the standard business content extracto
-
How do I connect to the Time Capsule Remotely?
Please give me step by step instructions. Current situation: - 4th generation Time Capsule with the latest firmware. - Time Capsule is connected to the internet through cable modem ! so there is a router inbetween the TC and Internet. - Bridging the
-
Customizing the calendar component
hi, I am using jdev 11.1.2.0 In calendar component when in the list mode. we are having one button name "Today" and along with date range. My requirment is to display today date when clicking of today button in list mode. Is it possible.How can i cus
-
Failed on Java CI add-in installation with Java Admin Account Create
I've installed an ABAP stack and it works smoothly. Java Central Instance Service(add-in) and Java Database Instance(add-in) are both installed successfully. When I install Java Central Instance(Add-in), I get an error when system asks me to input pa