Need to create Goods receipt Bapi in CO11

Hi,
I have a requirement, In Confirmation of Production Order (CO11) if the stock quantity is less than production order quantity i need to add quantity in stock for that i am trying to add material quantity in Goods Receipt by using bapi 'BAPI_GOODSMVT_CREATE', coul any one tell where to add the code in CO11 i.e Enhancement name...... or any other way...
Thanks,
Shekar

check these exits:
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
Reddy

Similar Messages

Error while using BAPI to create Goods Receipt Document

Hello All,
While using the bapi BAPI_GOODSMVT_CREATE to create Goods receipt document ,the following error is encountered:-
Error Message:FOR OBJECT XABBELEGNR,NUMBER RANGE INTERVAL DOES NOT EXIST OM36.
Do we need to create a number range object ??If yes,how and where to create ?
Thanks,
Deepti.

Hi Deepti!
There is only a valid interval missing, not the whole object.
Maintenance can be done via transaction SNRO, enter your object XABBELEGNR in entry screen. (Alternatively use transaction OMJ6).
Push button 'Number Ranges' and 'Change Intervals'. Here you can define an interval.
Regards,
Christian

DIAPI - Create Goods Receipt for Serial Number - on Release Only

Hi Experts,
I need your advise to create Goods Receipt by using DIAPI, where the item is managed by Serial Number - on Release Only.
The option that I'm exploring is to use ‘Automatic Serial Number Creation on Receipt’ turned on.
In standard SAP function with the above setting, we can create a Goods Receipt without entering any Serial Number, and SAP will automatically creates empty Serial Number. I'm trying to do the same thing by using DIAPI with the below code.
oTargetDocument.Lines.ItemCode = 'abc'
oTargetDocument.Lines.WarehouseCode = 'whs'
oTargetDocument.Lines.UnitPrice = 100
oTargetDocument.Lines.BinAllocations.BinAbsEntry = 1
oTargetDocument.Lines.BinAllocations.Quantity = 1
oTargetDocument.Lines.Quantity = 1
'--       I skipped the below code, expecting SAP will create the empty Serial Number automatically
'     oTargetDocument.Lines.SerialNumbers.SetCurrentLine(0)
'     oTargetDocument.Lines.SerialNumbers.InternalSerialNumber = 2
'     oTargetDocument.Lines.SerialNumbers.Add()
'     oTargetDocument.Lines.BinAllocations.SerialAndBatchNumbersBaseLine = 0
oTargetDocument.Add
But, it returns 1470000838 - Invalid "SerialAndBatchNumbersBaseLine"; specify a valid "SerialAndBatchNumbersBaseLine"
Can anyone please advise how we should achieve this?
Any example or reference is very much appreciated.
Thank you and kind regards,
Krisma

Hi Krisma,
I was trying to simulate the issue here, but I couldn't post a good receipt PO even from the SAP itself with the setting you mentioned.
I have set the management method as 'On Release' and ticked the Automatic serial number creation flag as well under general settings of inventory. Is that the setting you mentioned or something else?
Best Regards,
J S L Geeganage

Create Goods Receipt PO from AP Reserve Invoice (bug?)

Via the user interface of sap2005 pl7 you can create "Goods Receipt PO" from an "AP Reserve Invoice".
In the "base type" field of goods receipt the value "18" is displayed. This seems not to be a "valid value" and it is as a consequence not possible to read the contents of this field with the UI-API, because <i>base type</i> is a combo box and only valid values can be returned.
Is there a workaround to get a none valid value from a combobox?

Hi Jurgen,
It looks like it is a bug and that the same bug exists on the sales side of the DI API. Herewith a post that you can read about it.
/thread/48329 [original link is broken]
Hope it helps,
Adele

Bins problem while creating goods receipt for production order.

Hi All,
          I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS    Stock Avail.st BUn GR Date    DocumentNo Storage Unit         Time
SLoc Batch      Re IA PutawayS Pick qty Cert. No.
VN1 106A088                 0        0 CS 01/25/2010    4739297 1005721391           10:00:59
100 0001020069            60        0
VN1 107B076                 0        0 CS 01/25/2010    4739298 1005721392           10:01:01
100 0001020069            60        0
VN1 108B076                 0        0 CS 01/25/2010    4739299 1005721393           10:01:04
100 0001020069            60        0
VN1 109A077                 0        0 CS 01/25/2010    4739300 1005721394           10:01:06
100 0001020069            60        0
VN1 110B079                 0        0 CS 01/25/2010    4739301 1005721395           10:01:08
100 0001020069            60        0
VN1 106B088                 0        0 CS 01/25/2010    4739302 1005721403           10:01:11
100 0001020069            60        0
VN1 123B158                 0        0 CS 01/25/2010    4739303 1005721389           10:01:13
100 0001020069            60        0
VN1 124A160                 0        0 CS 01/25/2010    4739304 1005721390           10:01:15
100 0001020069            60        0
VN1 118A133                 0        0 CS 01/25/2010    4739305 1005721396           10:01:17
100 0001020069            60        0
VN1 119A128                 0        0 CS 01/25/2010    4739306 1005721397           10:01:20
100 0001020069            60        0
VN1 120B162                 0        0 CS 01/25/2010    4739307 1005721398           10:01:22
100 0001020069            60        0
VN1 121B159                 0        0 CS 01/25/2010    4739308 1005721399           10:01:24
100 0001020069            60        0
VN1 122B159                 0        0 CS 01/25/2010    4739309 1005721400           10:01:26
100 0001020069            60        0
VN1 123B159                 0        0 CS 01/25/2010    4739310 1005721401           10:01:29
100 0001020069            60        0
VN1 124B160                 0        0 CS 01/25/2010    4739311 1005721402           10:01:31
100 0001020069            60        0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PM

no replay, clossing threat.

Could not create Goods receipt.

Hi,
In a program, we are trying to create Goods Receipt for Purchase Orders by calling the function module MB_CREATE_GOODS_MOVEMENT. But it is just giving the error message "No goods receipt possible for purchase order & &". But we are not able to find out why it is giving this message. Could anyone please help me to resolve this error message.
And for some Purchase Order items, it is giving the message "Batch Cannot Determined", please let me know why this error is coming for few items.
Thanks..
Priya.

BZZZZ Wrong. I purchased "Clocks" by Coldplay and it is not a plus version and I am getting the -42160 error. I closed and reopened iTunes and still it doesn't work. However 5 minutes earlier I successfully created a ringtone from another song I purchased. Go figure...

User not able to create goods receipt

hi experts,
workflow is completed and purchase order also released
but user doesn't able to create goods receipt
i have checked in return parameters in container there is no error
how to check the workflow and why user getting problem??
could you please send your advises ,

Hi,
What Error you are getting ?
Regards,
Manish Jain

Function Module which creates goods receipt document

Dear all:
Do you know a function module which creates goods receipt document?
Thanks
Bac

Hello, Satyanarayana and Mickael,
I found the function module. It is called BAPI_GOODSMVT_CREATE.
Thank you for your suggestion. I think your suggestion works also, so now I have two solutions that I can use.
Bac

Create goods receipt using bapi fm

hi friends,
              i am geetha, i having a problem like while creating the goods receipt .
   create a goods receipt without purchase order using the tcode MB1C , I NEED EXACT BAPI function module to create agoods receipt.
my fields are :
                     posting date
                      goods receipt issue slip number
                      movement type
                      matnr
                      quantity
                      units of measure
                       plant
                      storage location
can you please suggest me the bapi fm and describe the fm
regards
geetha.

follow these links
[link1|http://abap.wikiprog.com/wiki/BAPI_GOODSMVT_CREATE]
[link2|Re: How to use bapi 'BAPI_GOODSMVT_CREATE' in program?;
Regards,
SAPient

Creating goods receipt with refernce to PO number using BAPI_GOODSMVT_CREAT

Hi Gurus,
I have a requirment where in, I need to create a goods receipt with reference to a PO number which has been created by BAPI_PO_CREATE1, using another BAPI BAPI_GOODSMVT_CREATE. How can I do this? what are all the values that I need to fill in GOODSMVT Create BAPI.
Please help its very urgent... Need to submit by EOD.
Thanks,
Suma

hi
hope this code will help you,.
Reward if help.
REPORT ZRICH_0001 .
Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE    TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM    TYPE TABLE OF
                 BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE   = SY-DATUM.
GM_CODE-GM_CODE      = '04'.                                " MB1A
Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412'                 TO GM_ITEM-MOVE_TYPE     .
MOVE 'Q'                 TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1'     TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC'    TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901'   TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
     EXPORTING
          GOODSMVT_HEADER = GM_HEADER
          GOODSMVT_CODE    = GM_CODE
     IMPORTING
          GOODSMVT_HEADRET = GM_HEADRET
          MATERIALDOCUMENT = GM_RETMTD
     TABLES
          GOODSMVT_ITEM    = GM_ITEM
          RETURN           = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
check the BAPI_GOODSMVT_CREATE.
Functionality
You can use this method to create a material document for a goods movement.
You can only create one material document each time you call up the method.
You can use a simulation function before posting the goods movement to check how the data is updated in the database. The standard system is configured so that the goods movement is posted immediately without simulating beforehand.
Ensure that you transfer the data in the same way as it is run in the database, for example,
Material number 18-figure with leading zeros
Batches with uppercase letters
Note that for all transactions/events listed below, the posting date is entered in the header data of the material document. In the BAPI2017_GM_HEAD_01 interface, fill the PSTNG_DATE (import structure GOODSMVT_HEADER) field.
Notes
Authorization check check
In the MM Inventory Management component, the method does not execute any authorization checks.
Note that during a posting of a goods movement, depending on the business transaction of the system, authorization objects of other applications can also be checked.
Transfer
The following information about the material document that is to be created is transferred to the method:
a structure with header data
a structure with the code for the movement
a table with the item data
a table with the serial numbers
The posting is carried out in the SAP R/3 via the MB_CREATE_GOODS_MOVEMENT function module.
Confirmations
Messages are returned in the Return parameter. The parameter documentation shows the return codes and their meanings.
Further Information
The method can only carry out your function if no error messages were generated in the Return table. This is the case if the header data and all the items were processed successfully.
Transaction control is not implemented. The calling program therefore has to execute the Commit Work itself after this method has been successfully called (in other words, if no errors were reported in the Return parameter).
Which fields have to be filled during the various transactions/ events?
The following sample scenarios demonstrate which fields have to be filled for which business transactions/events (code).
There are the following types of transactions/events:
1. GM_Code 01: Goods receipt for purchase order
2. GM_Code 02: Goods receipt for production order
3. GM_Code 03: Goods issue
4. GM_Code 04: Transfer posting
5. GM_Code 05: Other goods receipts
6. GM_Code 06: Reversal of goods movements
7. GM_Code 07: Subsequent adjustment to a subcontract order
Entering the movement indicator
Depending on the transaction, you must enter the following in the movement indicator:
GM_Code 01 (Goods receipt for purchase order): B
GM_Code 02 (Goods receipt for production order): F
For all other transactions, you leave the field blank.
For 1: GM_Code 01: Goods receipt for purchase order
Purchase order known
The following fields have to be filled:
Purchase order
Purchase order item
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry or
quantity proposal
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this in the system)
Reason for movement (if it has been configured like this in the system)
Batch (if the material is handled in batches and batch numbers are not assigned automatically)
Storage location (if a storage location has not been specified in the purchase order item)
The following fields can be filled (incomplete listing):
Stock type
Item text
Unloading point
Delivery completed indicator
You cannot fill the following fields (incomplete listing):
Account assignment fields (account assignment is adopted from the purchase order)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
In the case of a purchase order item with the "subcontracting" item category, only the GR item in the interface is to be transferred. The system automatically determines GI items.
Purchase order unknown: Shipping notification known
The following fields have to be filled:
Delivery
Delivery item
Movement type
Other fields, such as those under "Purchase order known". The system determines the relevant purchase order item via the delivery/delivery item.
Purchase order unknown: Purchase order should be created automatically
The following fields have to be filled:
Material number
Plant
Storage location
Vendor
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this in the system)
Reason for movement (if it has been configured like this in the system)
Batch (if the material is handled in batches and batches are not assigned automatically)
The following fields can be filled (incomplete listing):
Stock type
Item text
Unloading point
You cannot fill the following fields (incomplete listing):
Account assignment fields (automatic creation of purchase order items with account assignment is not supported)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Purchase order unknown: A purchase order should not be created
The following fields have to be filled:
Material number
Plant
Storage location
Vendor
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this)
Reason for movement (if it has been configured like this)
Batch (if the material is handled in batches and automatic assignment of batch numbers is not set)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Account assignment fields (automatic creation of purchase order items with account assignment is not supported)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
The input combinations listed above for the GM_CODE 01 can be combined within an input table so that they can be posted in a material document. Items can also be posted for different purchase orders, provided that all the purchase orders refer to the same vendor.
Transfer of subcontracting components
During the posting of the ordered material of a subcontract order with movement type 101, for the transfer of the subcontracting components, the filled unique identification of the document line (LINE_ID) is also required.
More information on LINE_ID and PARENT_ID
The following fields have to be filled for the components:
Unique identification of the document line
Identification of the immediately superior line
Material number
Plant
Storage location
Quantity in unit of entry
The following fields can be filled for the components:
All other fields in the method that are included in this list.
The following fields cannot be filled for the components:
All fields that are not included in the list above. The movement indicator must be initial.
Additional fields in goods-receipt-based invoice verification
When you post a goods receipt to purchase order with movement type 102, an issue with reference to a previously posted goods issue, the following fields must also be transferred:
REF_DOC_IT (LFPOS): Item of a reference document
REF_DOC (LFBNR): Document number of a reference document
REF_DOC_YR (LFBJA): Fiscal year of a reference document
Only when you transfer these fields is it guaranteed that the reference to the original goods movement stay the same.
For 2 GM_Code 02: Goods receipt for production order
The following fields have to be filled:
Order
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry or
quantity proposal
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if the system has been configured like this)
Reason for movement (if the system has been configured like this)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Storage location (if storage location has not been specified in the order)
The following fields can be filled (incomplete listing):
Order item (co-product)
Stock type
Item text
Unloading point
"Delivery completed" indicator
The following fields cannot be filled (incomplete listing):
Account assignment fields (the account assignments are adopted from the purchase order)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
For 3 GM_Code 03: Goods issue
Goods issue without reference to a reservation
The following fields have to be filled:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Special stock (e.g. sales order, project, vendor etc.)
Shelf life expiration date (if the system is configured like this)
Reason for movement (if the system has been configured like this)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Account assignment fields
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
Goods issue with reference to a reservation
The following fields have to be filled:
Reservation number
Reservation item
Record type of the reservation
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if this has been configured in the system)
Reason for movement (if this has been configured in the system)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Storage location (if not planned in the reservation)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Movement type
Material
Plant
Account assignment fields
For 4 GM_Code 04: Transfer posting
Transfer posting without reference to a reservation
The following fields have to be filled:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Receiving material
Receiving plant
Receiving storage location
Receiving batch (if material is handled in batches and you want to change batches)
Receiving/issuing special stock (e.g. sales order, project, vendor etc.)
Shelf life expiration date (if this has been configured in the system)
Reason for movement (if this has been configured in the system)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Account assignment fields (for automatic posting lines: Expense/income from stock transfer)
The following fields cannot be filled (incomplete listing):
Reservation
Transfer posting with reference to a reservation
See goods issue with reference to a reservation
For 5 GM_Code 05: Other goods receipts
Other goods receipt without reference to a reservation
See goods issue without reference to a reservation
Other goods receipt with reference to a reservation
See goods issue with reference to a reservation
For 6 GM_Code 06: Reversal of goods movements
You can use the Cancel method to reverse goods movements. But you may also want to cancel a goods movement without referring to a material document (see the Cancel method).
If you want to work without referring to the document, you have to fill the field BAPI_GM_ITEM_CREATE-XSTOB in the interface (import table GOODSMVT_ITEM). In this case, the system converts the movement type assigned in the interface to the reversal movement type. Alternatively, you can set the reversal movement type in the interface. In this case, the BAPI_GM_ITEM_CREATE_XSTOB field must be transferred blank.
If you want to cancel a goods movement with reference to a reservation (without using the Cancel method) you can only transfer the field BAPI_GM_ITEM_CREATE_XSTOB if it is filled. Movement types are not transferred when you post with reference to a reservation, as the movement type is contained in the reservation item.
For 7. GM_Code 07: Subsequent adjustment to a subcontract order
Ordered material of subcontract order
The following fields have to be filled:
Unique identification of document line (can be assigned to anything)
Posting date in document header
Document number of purchasing document
Item number of purchasing document
Material number check
Plant check
Movement type (select movement type 121)
Movement indicator (must be O)
Further entries are not allowed. The entry quantity for the ordered material of a subcontract order must be zero.
Components
The following fields have to be filled:
Unique identification of document line (can be assigned to anything)
Identification of the immediately superior line
Plant
Material number check
Quantity in unit of entry; can also be negative
The following fields can be filled:
Storage location
All other fields in the method that are included in this list.
The following fields may not be filled:
All fields that are not in the list above. The movement indicator must be blank.
More information on LINE_ID and PARENT_ID
Additional fields in goods-receipt-based invoice verification
When you post a subsequent adjustment, the following fields must also be transferred:
REF_DOC_IT (LFPOS): Item of a reference document
REF_DOC (LFBNR): Document number of a reference document
REF_DOC_YR (LFBJA): Fiscal year of a reference document
Only when you transfer these fields is it guaranteed that the reference to the original goods movement stays the same.

Create Goods Receipt with an Inbound Delivery

Hi,
Can you anybody help me, how to create a Goods Receipt with correspond to Inbound Delivery.
Which FM or BAPI avaliable for this. Anybody did it before please pass to me with details?
Thanks in Advance
Cino C B
Edited by: Cili on Feb 11, 2008 8:19 PM

Check BAPI_GOODSMVT_CREATE
Look at the documentation if you want to make a goods issue or a good receipt for purchase order or production order, etc.
Inbound delivery only means is going to enter the plant (ie. mvt 101)

Help needed on Outbound Goods Receipt (IDoc)...

Hi Experts,
Can we use the message type WMMBXY and IDoc type WMMBID02 for Outbound Goods Receipts scenario also (Sending Goods Receipts information to target system).
Because WMMBID02 seems to be for Inbound going by the documentation in WE60. Can we use this for outbound as well? All the field mapping is perfect with respect to this IDoc and all the required fields exist in this IDoc.
I am struggling to find a suitable outbound process code and processing function module to trigger Idoc from MIGO Transaction once the goods receipt is created / generated.
Please advice me on how to achieve the above functionality.
Thanks in Advance.

Hi,
check with this link it might be helpful to u ...
<u>Purchase Order
Re: Problem to send idoc for a Good Receipt created
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=1279261</u>
Hope this will surely help u ...
regards,
sana.
reward for useful answers...

PO item on hold and can't create Goods Receipt PO

We have a situation where a PO was created in our system which is 2007A SP00 PL 15. The item on the PO has since been placed on hold. Now when I pull up the po I change the item number to a valid item and click Update. So far so Good. No when I gry to copy the PO to a GR PO I get an error that the item is on hold and the document can only be saved as a draft. It is trying to create the Goods receipt PO with the original item instead of the new item.
How can I handle these? It is not possible to edit the original item on the po.
Thanks,
don

Thanks for the quick reply gordon. I figured it out. I have a FMS on the Goods Receipt PO screen that was inadvertanlty changing the item number after the GRPO opened. The item number it changed it to was on hold. My Bad.
Thanks,,
don

Unable to create Goods Receipt for Scheduling agreement

Hi,
I am have setup Scheduling agreement. When i try to create the Goods receipt on MIGO by entering the agreement #, I get an error : Purchase Order not yet released.
Please help, I couldn't find similar issue reported on this forum.
Thanks
Ramya

Release SA by T-code ME35L , If it's PO Release by ME29N

DTW : How to Create goods receipt with quantity exceeding purchase order ?

Hello DTW Experts,
is there any way to deliver or receive an quantity exceeding the quantiy of the purchase order using DTW, or the only way is to create additional order (create a goods receipt is based on a purchase order).
When i try the system gives me these 2 different messages :
1 - One of the base documents has already been closed PDN1.BaseEntry[line: 1]Erreur définie par l'application ou par ...
2 - One of the base documents has already been closed Erreur définie par l'application ou par l'objetoPurchaseDeliveryNotes
Thanks,
Hafid

The best way is to draw the purchse order through then add an additional line to the Goods Receipt for the additional quantity. This will close the PO properly, but record the additional quantity

Need to create Goods receipt Bapi in CO11

Similar Messages

Maybe you are looking for