Need to create Server group for Background processes

Hi Gurus,
I need to increase my background work process can anyone tell me how to configure it.There is only 1 background work process configured in my installation.
Thanks,
Ravi

HI Ravi
When you goto transaction rz10, you will rightly get 3 profiles,namely
Default profile
Start profile
Instance Profile
Out of the three, select the instance profile ( the one with the SID and the instance number) and get in the change mode by clicking on the spectacle button in the bar.
Further you will find the parameter rdisp/wp_no_btc in this profile. This parameter indicates the no. of background work processes set for this particular instance,
Change the value for this parameter. Also note that the no. ny which u increase the batch proceses, also reduce the dialog process by the same number in parameter rdisp/wp_no_dia.
Restart the system and the changes will come into effect.
I hope this helps you
Regards
Chen

Similar Messages

Do I need to create new group for standby redo log files?

I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group#     Members
==============
1              2
2              2
3             2
4             2
5             2
6             2
7             2
8             2
9             2
10           2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.

Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer.

Creating server group for scheduling Webi report

Hi All,
I have 33 scheduled reports running in my BO 4.1 environment.
I want to split this in 3 groups and create server group to run specific job.
To achieve this what should I have to do ?
In group one what server and services should be there to run my schedule successfully ?
I thought of cloning server but my research says it is not good practice. Can someone please guide me with this ?

Please share the details regarding web intelligence report based on BW data or based on Universe (RDBMS) because in both the case Adaptive Processing Server configuration is change.
For BW Data Source below is the details regarding Adpative processing Server:
<Node_Name>_SIA.APSCORE
Services:
Auditing Service, Platform Search Service, Security Token Service, TraceLog Service, Translation Service
<Node_Name>_SIA.APSFEDERATION
Services:
Auditing Service, Data Federation Service, TraceLog Service
<Node_Name>_SIA.APSLCM
Services:
Auditing Service, Lifecycle Management ClearCase Service, Lifecycle Management Service, TraceLog Service, Visual Difference Service
<Node_Name>_SIA.APSMonitoring
Services:
Auditing Service, Monitoring Service, TraceLog Service
<Node_Name>_SIA.APSPublishing
Services:
Auditing Service, Publishing Post Processing Service, Publishing Service, TraceLog Service
<Node_Name>_SIA.APSWebi
Services:
Auditing Service, DSL Bridge Service, Rebean Service, TraceLog Service, Visualization Service, Web Intelligence Monitoring Service
<Node_Name>_SIA.BexWebApplication
Services:
Auditing Service, BEx Web Applications Service, TraceLog Service
<Node_Name>_SIA.MDAS
Services:
Auditing Service, Multi Dimensional Analysis Service, TraceLog Service
For Job Server:
Adaptive Job Server:
<Node_Name>_SIA.AJSWebi
Services: Web Intelligence
Add all above services in Server Group and assign to web intelligence report based on BW Data and check the status.
Thanks,
Daya

Logon Group for Background proccess. Is posible?

Hello,
I've a SAP system with 5 aplication servers. Users connect to them through logon groups . The logon groups work perfectly for the processes of dialogue.
This is what I'm looking for:
The background jobs are running on the server unless charged. But I want some JOBS run on servers 0, 1 and 2, and will not run on servers 3 and 4.
How can I do it. Are there logon groups for background processes or JOBs?.
Note: There are background processes in All application servers.
Thans in advance.

HI
Yes you can do that , you can define the background logon group in SLMG , same way u have done for dailog process and you can assigh the logon group to a particular job , that way job will run on the server which has highest quality in SLMG ie in which there are more free workprocess provided you have background work process defined on those servers like
server 123 you can use for dailog and define tht in SLMG and use 145 for background jobs
you can use servers for both background and dailog provided you have defined enough no of background and dailog work process .
before you make background logon group check out the background workprocesses in all application server ,
Hope this will help you ,,
Cheers
dEE

Creation of event for background processing

Hi,
I need to create a event for background job. in which the job has to be created based on variant in one user exit via sm36 and i have to trigger the same in other user exit.
thanks in advance
shiva

Try using the Function module "BP_JOB_CREATE" .
rgds
anver

Request could not be submitted for background processing

Using Crystal Reports XI R2
 Using Visual Studio .NET 2005
 
 Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in to the report via the parameters. We then generate and export the report to another rpt file with saved data using the PULL method from the report itself. When the viewer wants to view the report the file (with saved data) is copied locally to the web server and the CrystalReportViewer control is pointed at the rpt with the saved data in it. In almost every case the reports come up fine and display in the viewer no problem. The error above (Request could not be submitted for background processing) tends to show itself in the CrystalReportViewer control whenever the report has large amounts of data (like 8 megs worth). I've tried everything I can find on this issue including the steps listed in the white paper for this issue.
 
 So just to be clear on the steps taken:
 1)If I take the saved rpt and open it in Crystal Reports itself then it works fine.
 2)If I point to the rpt with the CrystalReportViewer control in my development environment it works fine.
 3)I've run Process Monitor and there were a couple of access denied messages to one of the HKLM registry keys but I modified the permissions so those went away but the problem still remained
 4)As far as I can tell the report has no design issues. Nothing runs over any edges, no overlapping of any kind, the Font itself exists on the machine in question.
 5)Its not a dataset problem since the report is using the PULL method to generate itself plus the rpt with saved data is correctly generated its just showing the above error when trying to view it in the control.
 6)The client is using a WIndows 2003 server, with 4 Quad Core processors and 8 gigs of RAM and 100 gigs of hard drive space remaining (so hardware is not an issue)
 7)In code the ReportDocument object is inside a using statement (C# .NET) and only exist for the brief period needed to create the rpt with saved data. So they are getting closed and disposed of correctly. Also as pointed out above the rpt with saved data is already being generated correctly its just not displaying in the control.
 
 So to recap on a web server used by multiple people whenever a user tries to view a saved rpt file that has a large amount of data using the CrystalReportViewer control the error above tends to get generated even though the vast majority of the reports do display. I'm at a loss for what else to try to make the report display correctly in the control. Any thoughts would be helpful.

Make sure you are using SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Other than that, I'd consider installing the CR designer - as a test, on the user machine and see if the designer can open the report.
Ludek

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Could not support request for background processing

Hello,
We have a .NET 1.x application with CrystalReportViewer control.
The application is running on a windows terminal server with approximatively 5 users using the applications and 10-20 logged on doing other stuff.
When the user tries to preview the report using the CrystalReportViewer object , the following exception is "sometimes" thrown
[translated from dutch]
CrystalDecisions.CrystalReports.Engine.InternalException:
error in file C:\Users\*username*\AppData\Local\Temp\35\{B8D10435-A104-4422-A220-6DB483DFC285}.rpt:
The request could not be submitted for background processing. ---> System.Runtime.InteropServices.COMException (0x800002AD)
The application then terminates and if the user restarts the application attempts to reload the report, it usually loads with no problem .
It can not be intentionality reproduced but it does happen frequently.
I have been Googling for this problem , but havn't found any solution.
On this website however a link is provided to a BO KB article with a possible solution:
http://aspadvice.com/blogs/rjdudley/archive/2005/10/26/13443.aspx
However, the article appears to require a login, my SAP CR account i used to register on these forums does not to work.
What can we do to determine the exact cause of this problem, or are there any known solution for this problem ??
If you need any more information please do ask.
also,
We have a licence for CR 11 and so does our client, what steps would we need to undertake to get professional /payed support from SAP crystal reports for techinal issues like this, is there a way to open a support ticket ?
Thank you very much for your time, any help is appreciated !
Willem

Hello:
First I have to apologize for the troubles with CR 11.5 - not sure why that would be, but your frustration is understood. Perhaps sometime in the future we can look at this in another thread (e.g.; it should just work...).
Anyhow, there is really no compeling reason for you to go to CR 11.5 (there are reasons (see below), but 11.0 is fine with framework 1.1).
So to start off. Version 11.0.0.895 will need to be updated to SP4. See this|http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008%28and9.1%2CXIR1%2CXIR2%29-VersionandDownloadinformationforServicePacks] wiki. As you can see in the wiki, the latest version of CR 11.0 is updated to SP 4 with a version of 11.0.9500.x. Before we even start to look at this, you will have to get to SP4.
Re. preference for CR 11.5. If the issue is not resolved with CR 11 Service Packed to SP 4, all we have left is; going to CR 11.5 - with the latest SP (SP6) as that is the version I would be testing with. Note that CR 11 is completely out of support now, CR 11.5 is out of patch support (e.g.; no fixes) and any support terminates in June of this year.
And we have not even started to work the issue. Re-reading your initial post, I am starting to suspect that loading may be the root of the issue here. I'd recommend having a peek at the following:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d08468e2-a81d-2b10-faa9-9837f58ee1c2
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The following article specifies CR 2008, but most if not all the points will apply to CR 11.0 also:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The below will also be good to be aware of:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0070692-01a8-2a10-4797-ff0f5f73e1e1
The following articles were written by me and may also apply:
[Crystal Reports Maximum Report Processing Jobs Limit|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]
[Improving Crystal Reports Performance in Visual Studio .NET Applications|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b].
I realize I've thrown a lot of info in here, but all of it may apply. In a way I feel like we've ended up across the river without crossing the bridge first, but let's see what comes out of all of this (teleporting worked for Captain Kirk ).
- Ludek
Edited by: Ludek Uher on Mar 10, 2011 7:25 AM

Do we need to create message interfaces for idocs and rfcs thatare imported

do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaces

hi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

The request could not be submitted for background processing.

Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.

Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2]

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Problem creating cache group for a table with data type varchar2(1800 CHAR)

Hi,
I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error.
5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted
5168: Restricted cache groups are deprecated
5126: A system managed cache group cannot contain non-standard column type mapping
The command failed.
One of my filed type in oracle table is Varchar2(1800 CHAR). If I change the filed size to <=1000 it (E.g. Varchar2(1000 CHAR)) then the Create Cache command works fine.
MyDatabase Character Set is UTF8.
Is it possible to solve without changing the filed size in the Oracle Table?
Request your help on this.
Thanks,
Sunil

Hi Chris.
The TimesTen server and the Oracle Client is installed on a 32-bit system.
1. ttVersion
TimesTen Release 7.0.5.0.0 (32 bit Linux/x86) (timesten122:17000) 2008-04-04T00:09:04Z
Instance admin: root
Instance home directory: /appl/TimesTen/timesten122
Daemon home directory: /var/TimesTen/timesten122
Access control enabled.
2. Oracle DB details
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Oracle Client - Oracle Client 10.2.0.4 running in a 32 bit Linux/x86
3. ODBC Details
Driver=/appl/TimesTen/timesten122/lib/libtten.so
DataStore=/var/TimesTen/data
PermSize=1700
TempSize=244
PassThrough=2
UID=testuser
OracleId=oraclenetservice
OraclePwd=testpwd
DatabaseCharacterSet=UTF8
Thanks,
Sunil

Help! - need to create/list groups in OS 10.5.2 unix

I need to create some groups in order to install Oracle
on my 10.5.2 MAC. 10.3.6 MAC had nireport and nicl to
list and create groups. Unfortunately even tho I can get
man pages for these commands, the commands themselves no
longer exist.
When I posted this question to another forum they directed
me here, and mentioned that dscl would do what I want.
But I can't make heads or tails out of the man pages for
dscl!
Help!

SystemPreferences>Accounts, unlock the lock and click the '+' sign. The pull down of 'New Account' has a 'Group' item in it.

Do we need to create two zones for Two HBA for a host connected with SAN ?

Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
    pwwn 50:06:NN:NN:NN:NN:NN:NN
    pwwn 50:06:NN:NN:NN:NN:NN:NN
          pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?

if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production.

Need to create Server group for Background processes

Similar Messages

Maybe you are looking for