Need to Create the STATUS Profile for Q-Info record

Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SM

BS02--->Select the status say " QM_P_001" ->Copy As F6  - >Enter new name>enter.
Now chage the relevent data as per your requirement.

Similar Messages

  • Status Profile in Q Info record

    Hi,
    I manintained a status profile in Q Info record for PPAP approval process and working fine for status changes from Proto to Pilot to Production lots. The functionality works fine  as long as each status change happenes automatically based on the UD for each lot.
    But I am having a additional requirement which should prevent automatic status change based on Usage Decision.
    It is this way, initially inspection lot will be created in 0101 (Proto) and status should change only wen the user set  the next status.
    The next inspection lots will be created in 0102 inspection type, until next status is set by user manually.
    If this status is set, next inspection lots should be generated with 01 inspection types.
    I am able to do this perfectly in a automatic way, if no manual status changes are done. How can I make a status profile for supplier relationship, which will not skip to next status, unless it is set manually.
    Thansk
    Vineeth

    Sujith,
    Thanks for your reply.
    Is there any standard option through which we can do status change in supply relationship. Without going for development.
    Requirement is as below for 3 stage approval.
    Proto stage 1- Inspection lot- 0101 origin
    Approved
    Proto stage 2- "Manual" status change
    Approved
    Pilot stage 1- Inspection lot of 0102
    Approved
    Pilot stage 2- "Manual" stage change
    Approved
    Bulk inspection lots of 01 inspection type
    Could anyone suggest a standard procedure to manage this status change using supply relationship. I am unable to do this, as my requirement at certain stage is to change status manually. Please suggest a way to change a staus maually, after automated stages.
    Any update on this, it would be helpful, if someone can show some light on this matter.
    Thanks
    Vineeth
    Edited by: Vineeth Varghese on Jul 22, 2010 6:06 AM

  • User status profile in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    Hi,
    The problem is due to missing authorization object :B_USERSTAT".
    Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
    Thanks
    SUMIT.

  • Status profile in Q-info record not updating on UD

    HI All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    any clue??
    Regards,

  • Status profile in Quality Info Record

    Hi,
    How do I default a status profile in the Quality Info record.  Can this be achieved through customization. Any pointers would be greatly appreciated.
    Regards
    Kiki

    Hy Kiki,
    Use Transection Code OQBA and create your screen varients with required User status.
    It will works only with Transection Code QI06 (Mass processing Q info Record)
    Regards
    Dhaval

  • Status profile for supply relationship vendor

    Hi,
    We have a Raw Material, we need to purchase this material from a vendor
    Customer need to maintain status profile for the supply relation ship vendor
    How it can be maintained.
    Pl guide me
    Regards
    Kumar

    Thank you very much for the reply against this thread,
    We have created Status profile through BS02 as follows
    satus no   status        descrip        initial status     lowest   highest   position    priority
    1              MODL      Model                x                  1             3           1             1
    1              PRLM      Prelim                                    1             2           1             1
    1              PROD     production                                1            3           1             1
    Then i have assigned these to Object type Quality info reocord and  i have assigned status profile in Quality info record.
    Now pl guide me how we proceed further. since as per SAP document says that each stages to be assigned in different inspection type.
    Regards,
    Kumar
    Edited by: Kumar DS on Nov 3, 2008 9:23 AM
    Edited by: Kumar DS on Nov 3, 2008 9:24 AM

  • How can I use two "Status profile" for two categories of users?

    Hi friends,
    I tried to configure two categories of users :
    1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
    2 - The second category (User2) can process the message using another status profile (ZSLFC001).
    To do this, i process like following :
    1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
    2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
    3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
    4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
    5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
    Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
    Tank you for your help,
    Samad

    Hello Xavier,
    I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
    Furthermore, The change of process type will affect all users.
    I think that there are two possibilities :
    - Using process type (SLFN or ZLFN) according to the user processor,
    - or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
    Please find below more informations about the role:
    - the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
       Activity                  :    01, 06                                
       Authorization key   :    ZSLFN                               
       Object Category     :     *                                          
       Status Profile         :    *                                          
    Thank you
    Best regards
    Samad

  • How to assign the status profile to that particular user..?*

    Hello Everyone..
    I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
    Now My problem is ,How to assign the status profile to that particular user..?
    so that only the user is allowed to change the order.
    Thanks

    Hi,
    Maintain authorization key (authorization code)  in status profile.
    We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
    We assign T.codes to role and assign role to user.
    Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
    Click on authorization data .
    Expand the  Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
    Click on Authorization key button, assign Authorization key.
    Click on status profile. assign status profile.
    Regards,
    Chandra

  • Automatic Selection of  "User Status Profile" for Inspection lot

    Hi all,
    I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
    Thanks
    Veeresh

    You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
    You can use 04pppp where pppp = your plant ID.  So 041000, 042000, 042010, 043000, 043140, etc...
    In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
    FF

  • Changing Status Profile for WBS Element

    Hi Freinds,
      How can we change the Status Profile for the WBS Elements.
    say for Eg : need to chage status Profile Z0000005 to Z0000008
    where they reflect in DB Table JSTO for OBJNR in filed STSMA
    Please suggest me the function modules or BAPIs
    Thanks in Advance,
    Ganesh

    hi,
    try the below given link
    [Changing Status Profile for WBS Element|Update WBS element;
    hope this helps
    Regards
    RItesh J

  • SD:Status profile for contract

    Dear Friends,
    I want to configure the status profile for contract with two status crtd (created) and rel (Release).please tell me how to configure the status profile and what is the significance of transaction control.
    Is it possible to display the status in the contract overview screen instead of going by Goto-Header-status menu and how ?please suggest.
    thanks in advance
    ravi k

    08.05.09
    use t.code bs02 and create your profile as required and assign the profile to the document type. With transaction control you can control further transaction for the particular status.
    regards

  • Need to create stupid proof templates for non-designers

    Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
    I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
    Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
    For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
    A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
    Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
    I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
    My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
    So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.

    Hey Mike, thanks for the response.
    1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
    2. Not sure if this would work. I'd have to look into it.
    3. Beyond my capabilities. I'll let you know if number 2 works.
    One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
    Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options.

  • Number Ranges for Purchasing Info Record

    Dear Guru's
    Number range  interval for Purchase info record  can be  created and assign to group and there are two group for Stock and Non Stock materials.
    Now my query is how the system pick the number range ??? Since we don't have any assignment like PR,PO
      My requirement is we have 3 company code - I need to have different number ranges for purchase Info  record for each company . Guide me to achieve ...
    Thanks in advance
    Regards
    Anand

    SAP has provided only Two standard document Types for Pur. Info Records.
    IL for Stock Material ( with matl No.)
    IN For material Group (w/o MMR).
    By default, if you enter Matl No. in the initial screen, system automatically picks the doc. type IL and the no. range assigned to it.
    If you're not entered matl. no. in the initial screen, and proceed the Transaction further, system picks the doc. type IN and prompts you to enter Matl Group.
    In the second case, the system picks up the no. range as per assignment.
    Here in your case, you want create a new no. range and assign to your IL/ IN.
    For this, you go to the transaction Define No. Ranges in Inforecord, from menu bar, choose Group-> maintain. Here you maintain your new no. range with a name. Now your new group is created with your required no. range.
    Then select your new group ( Check box), select, IL, and click assign button and save.. Your IL is assigned to your new group and system picks the new No. Range when you are creating a Inforecord with Mat No. Similarly, you can change No. range for IN also.
    or one more option you have.
    In the first screen of No. Ranges Transaction, select change intervals tab button, you'll be goto intervals screen. There, from Menu bar, choose Interval-> change current No. Then you reset your current no. to Zero, save it. The again choose Change Interval, then in that screen, change the Interval with your new no. range.
    Here in the second case, u need not maintain new groups. Just changing the Interval for the existing group.
    You can adopt any one of these options.

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • LSMW: ALE/IDOC, getting the Create a partner profile for message type

    Hi Gurus,
    In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
    when i'm generating the idoc in the 13th step, its posing the information message stating that:
    Create a partner profile for message type 'ZEMP_MSG'
    In partner profile i already assigned the message type .
    How to solve this issue, <inappropriate urgency removed by moderator>
    Thnks&regards,
    sree
    Edited by: Thomas Zloch on May 13, 2011 9:55 AM

    This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

Maybe you are looking for