Need to customize the message prompt in red after vendor is deleted

Hi
Once i have blocked the vendor through MK06 and try to create a PO with the deleted vendor
1. Does the PO get created
2. I want the message to be shown in Red where it doesn't allow to move further, the customizing part of the message settings
Thanks n Regards
Suresh

you are mixing "blocked" and "deleted"
Please understand "deleted" just as flagged for archving, the archving program will check if the vendor can really be archived. Until then you can usually use the vendor without major problems, you just get a warning that the vendor has a deletion flag.
if you want restrict procurement at a deleted vendor, then set the procurement block with MK05 transaction.
if the procurement block is activated, then you cannot create PO, thus you dont need to care about any message customizing
You cant get the message bullet to red anyway, red indicates a technical problem, it is not customizable and cannot be turned to red if the vendor has a deletion indicator.

Similar Messages

Customize the message of workprotect pop up

Hi,
Is there a way to customize the message of workprotect feature pop up, which notifies the user about unsaved data and allows to take proper action?

Hi,
Its not possible currently.
I order to change it there is a need to open a par file (epfcadmin) and change the text there, then redeploy it to the portal, but it is not recommended.
Regards,
Tal.

How to Customize the Message "No Row Returned" from a Report

Hi,
I've been trying to customize the Message "No Row Returned" from a Report.
First i followed the instructions in Note:183131.1 -
How to Customize the Message "No Row Returned" from a Report
But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
So i followed the "fix" in the document above and now my output is,..
"Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
So i search in Metalink for the above and come up with,...
Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

I have a mid 2007 iMac.    2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5.   I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?

I have a mid 2007 iMac.    2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5.   I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
      erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Updating the Message priorities in AQ after publishing ?

Hi,
I would like to know updating the message priorities in AQ after publishing the messages to AQ through Oracle JMS is a good approach ?.
Please post your comments on this.
Regards,
Murali.

Setup an AQ with CLOB Payload.
In Istudio, setup a custom data type that has a string value. When you are setting up the event, enter a field valled Payload, for the field type choose the data type you created.
That's it. You can use a CLOB datatype to pass messages through AQ's. We actually use this all the time.

"Mail was unable to find your reply to the message... You may have deleted the message."

I'm experiencing some kind of corruption in Mail's ability to connect replies to messages.
The error I'm starting to get says this:
"Mail was unable to find your reply to the message... You may have deleted the message."
And these emails are no longer threading like conversations and when you click on the little "read reply" arrow icon it can't find the reply.
What could be up here please?!?!?
Thanks!
David

CT,
Thanks SO much for a reply.
Yes it survives a restart, but i had no idea about this "Rebuild" option.
Trying that now!
Cheers!

How to customize the message using HttpSession info in WL-PubServer

Hi, im using Weblogic 10.3 Publish-Subscribe Server (PubServer) in order to create Comet application.
http://e-docs.bea.com/wls/docs103/webapp/pubsub.html
We are utilizing JMS Message system to support Clustered environment, and everything works great and as expected, however now we need to support sending User Customized data like (Internationalized Messages, date formatted in user timestamp preference and others).
Since we are posting the payload updates into JMS in a subsystem this 'User Preference (stored in HttpSession) is not accessible'. My goal is to try to put a hook into WL PubServer mechanism that delivers the message to the client(which is attached to an specific Channel) and be able to customize the Data (using HttpSession information) before it gets delivered.
I have researched about this for the past few days without luck, also trying to search information about the com.bea.httppubsub.servlet.ControllerServlet which is the responsible to handle this but again always end in a dead end. I'm starting to think this is not possible at all (at least with the current WL PubServer).
I'll be glad to hear any feedback on this.

Hi,
Sender object is type of object any time if you want to use any property/attribute of sender object first you need to type cast it with your desire object.
For more information, you could refer to:
http://blog.jsinh.in/managing-msmq/#.VPe5mnkfqM8
http://forums.asp.net/t/343932.aspx?How+can+I+get+values+of+sender+object+in+C+
Regards

Customize the message "Welcome, user !".

Hello,
When we login to Obiee, we get the mesage "Welcome, <user> !".
We need to customize this to show it as <user>, at position <postion variable>.
Could anyone let me know how to do it.
Thanks

The "Welcome" message comes from a message xml file, uimessages.xml which allows for a single parameter insert which is coded for the Display Name session variable. There is typically an init block in the rpd that sets the Display Name. OOTB this is the "LOGIN Properties" init block. You can try to modify the SQL for this init block so the Display Name includes the extended information you want to display. Of course, if Display Name is used anywhere else then it will also include the extended information.

Need to display the messages in a view which has the pop up on it

Hello all,
I have a view(View 1) in which if i click a button a pop up is being displayed.
Now on the pop up(which has view 2 of window 2) i have a button(Ok) and if i click it then based on a condition i need to close the pop up and then display the message in the message area of View 1.
Now if i click the button on the Pop up then it is being closed and the message is not being displayed on view 2.
I think the message is being displayed on the pop up and is being closed after that.
How can i display my message on View 1.
Any ideas...Please help
Thanks in advance,
Shravan

Hi Shravan,
Create Message area in view1.
and also give VIEW name wile displaying error message and try.
*   report message
CALL METHOD lo_message_manager->REPORT_ERROR_MESSAGE
    EXPORTING
      MESSAGE_TEXT              =
*      PARAMS                    =
*      MSG_USER_DATA             =
*      IS_PERMANENT              = ABAP_FALSE
*      SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
      VIEW                      =   VIEW1 .
Cheers,
Kris.

Need to customize the variable info sent to a query string

Hello,
I have run into a small issue while trying to send user data
selected from 1 DateField and 3 ComboBoxes in a form. Everything is
sending correctly except for the DateField, when sent is places
much un-needed info in the query string.
For example, this is what I need it to look like in the query
string:
https://reservations.ihotelier.com/onescreen.cfm?LanguageID=1&HotelID=13337&DateIn=09%2F28 %2F2006&Children=1&Adults=3&Length=3
Here is what is actually showing up right now:
https://reservations.ihotelier.com/onescreen.cfm?LanguageID=1&HotelID=13337&DateIn=Thu%20S ep%2028%2000%3A00%3A00%20GMT%2D0700%202006&Children=1&Adults=3&Length=3
You'll notice that everything is fine except for the DateIn
variable. So, I guess I'm asking if anyone knows how I can
customize the data that is sent to the query string, with specific
characters (example: I don't need "%20" in the DateIn, however I
need those to be "%2F"), as well as the name of the month to be
just the month number. I need to get rid of all the time
information in the DateIn variable. Please, any help would be
greatly appreciated! Thank you in advance! :)
Here is my action script right now:

The functionality of the GIS map was important. I was given the email for the person in charge of the map, who helped me out. It appeared that he was able to outline the road in the neighborhood that I needed to focus on. That provided a parcel ID, which in turn made it possible to focus in on the proper area. This is supposition on my part; perhaps he has other info that gave him the parcel ID.
I'm not a huge fan of Flash on other than desktops and laptops, but it is what it is, client needs to use it, I need to help the client out!
B

Need to customize the text displayed while sending payslip as pdf in mails

Gurus ,
   monthly we will run a report which will send the payslip as pdf to the employees . Now we need to edit the text that is getting displayed in the mail while we attaching the payslip as pdf and send .
how to achieve this

Hi Sarvan
Go to messages >> communication method , change the field Cover Page Text with ur po number and send. This is a manual process which you will have to do it for each po.
Now if you want to automate this then you can ask ur abaper to write a small program which will copy the po number to this field.
Table Name       NAST
Field Name       TDCOVTITLE
Regards
Rajesh
Do reward if useful.

Need help for the message flow in sap xi system?

Hello All,
My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
Client is not giving me the system details ...like network details and i need to say that can we send 8500 messages in the existing system with out changing the process speed or data base.
also please advice the best ways to increase the performance in the sap xi system when the message flow is huge.
thanks in advace.
Thanks and Regards,
chinna

>
chinnasapxi wrote:
> Hello All,
>
> My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
> chinna
3500 to 8500 is not a message count tht needs to be worried about
but to be on the safer side what is the average size of a single message?
if the size is not a significant one u can go ahead

When do you need to register the message bundle in the faces-config

hello
i have applied two examples to localize messages, label, title by creating message.properties file and utilizing the f:loadbundle component the EL expression. It works like a charm without having to register anything, I have only registered the locale, but not the bundle
also , i have used a programmatic approach
FacesContext fc = FacesContext.getCurrentInstance();
ResourceBundle msg = ResourceBundle.getBundle("message",fc.getViewRoot().getLocale());
fc.addMessage(FacesMessage.SEVERITY_FATAL.toString(),new FacesMessage(msg.getString("ok")));
which also worked without registering the message bundle!!
although many article i read ask to register the message bundle.
Another thing is that in Oracle Jdeveloper 10g for FORMS and PL/SQL Developers states that the message file needs to be located in \resource subdirectory
and using getBundle (resources.message) to get it. In fact i kept getting errors indicating that the base bundle cannot be read until i located the file in the ViewContoller directory itself (and that is why i reference it with getBundle("message") rather than resources.message as indicated in the book.
appreciate your response
ammar sajdi
amman - jordan

Hi,
Your question is not very clear. But let get through some various guideline.
<f:loadBundle/> is horribly buggy and was all but removed from the specification. As a tag, it gets only evaluated during the render view phase, meaning that if you have EL expression referring the loadBundle's var during another phase, it's going to fail. The most common case is during validation with overridden messages.
About the programmatic access, the problem is that you're linking your application to a specific bundle at code level. Meaning that you're preventing it to be reused in a different context, while the following get the most application local bundle name (faces-config.xml's message-bundle property)
Resourcebundle.getBundle(FacesContext.getApplication().getMessageBundle())Registration is also the only way to override the default conversion / validation messages.
For JSF 1.1 (10g), those are your option. However, if you're using JSF 1.2 (11g), you can also register resource bundles in the faces-config file, you then register the bundle and the var associated to it, removing the need of f:loadBundle and fixing the non render phase issues. furthermore, the code version is also simplified to:
FacesContext context = FacesContext.getCurrentInstance();
ResourceBundle bundle = context.getApplication().getResourceBundle(context, "varName");
bundle.getString("myKey");You other part about \resource I never heard of nor cared for. You can place the bundle where you like on the classpath.
Regards,
~ Simon

In the message class M7 i NEED TO CHANGE THE MESSAGE 301 FROM E to w.

In the program LMBGBFES I want to change the mesage e301 to w301 in the enhancement point but sap is not allowing to do so.
CAN YOU GIVE A SOLUTION TO HOW TO DO IT.
with regards ,
Mahasweta Mitra

hai mahasweta,
u cant change the message from E301 to W301 as the code where the message is placed does not come under any enhancement point so that cannot be enhanced , u can do even with implicit enhancements but that does nto fall under it i mean uisng implicit enhancement options u can add some new code at start and end of the programs, u can use enahcnement poitns to enhance the code which comes under that point and it is obvious sap do not allow everythign to be modifed , so if u want to really chnage ti then u cna use access key and change it but it has implications on other programs from where this is called
regards
m.a

Need to customize the message prompt in red after vendor is deleted

Similar Messages

Maybe you are looking for