Need to Define country and State
Hi All,
My customer is using SAP from around 15 years. Now they need to define country 'Palestine' and its States, Just wanted to know what are the things which needs to be considered for defining country.
Your inputs are appreciated.
Thanks
Best Regards
Shashi
Moderator: Please, search SDN
Hi,
Just go to OY01 to define the Country. Also you can create regions aswell.
Sap NW-General Settings---Set countries
Please go to above path and maintain all steps which are required for country.
Rgds
Murali. N
Similar Messages
-
How can i change my country and state will subscribing to adobe creative cloud?
I'm trying to subscribe to adobe CC but while entering my info i can change the location information. country and state are stuck on Us only.
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html -
Maps: Difference in Downloading Country and states...
Can someone please tell me what is the difference between downloading whole map of a country and again downloading map of state in it.
I have downloaded map of India and it is marked as downloaded buy when I click add new map » India » List of all.states, they are not marked.
So downloading states maps shows more detailed map?
Thank you.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------
Solved!
Go to Solution.There is no difference in the details of the Map data. Its only to facilitate faster downloading and using lesser space if you are planning to use navigation within a smaller area (State) as against a much larger (Country). You may notice that adding up the file sizes for all States is much much bigger than the file size of whole Country as one. This is because many areas are overlapped when you select States individually ...
-
I have defined a finite state machine: pb with button : they need to be click twice
I have defined a finite state machine and also defined a call to a C dll enabling to kill processus since in my state machine I have to sequence several exe and being able to interupt them (This is the goal of mu manageProc dll)
for the moment I make my integration test with the notepad.exe process
the create and kill seems to work
but I have problem wth my finite state machine I need to click twice on the differnts button for a given state to be really effective
I have also used glabal variable and an event controller ( without that I was unable to get ffedback oo buuton click
So my question are
Is my problem due to the use of a shift register
Please tell me if you need other file to understand my problem
Regards
Thibaut
Attachments:
Spectro State MAchine .vi 77 KBThibaut,
You should put the event structure into its own parallel while loop rather than sharing the loop with the state machine. Typically the terminals of the controls will be placed inside the event case where they are read. At least inside the loop.
Run your VI with execution highlighting on (the light bulb on the diagram toolbar). This will show you how dataflow works.
You probably do not need most of your global variables. Appropriate use of shift registers and wires would eliminate them.
Lynn -
Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!
iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC". -
Why do we need to define RFC destination and user for material replication
Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
RanjanHello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo -
Why to need close the result set and statement
why to need close the result set and statement
It's best to explicitly close every ResultSet, Statement, and Connection in the narrowest scope possible.
These should be closed in a finally block.
Since each close() method throws SQLException, each one should be in an individual try/catch block to ensure that a failure to close one won't ruin the chances for all the others.
You can capture this in one nice utility class, like this:
package db;
import java.sql.*;
import java.util.ArrayList;
import java.util.Map;
import java.util.LinkedHashMap;
import java.util.List;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
* Created by IntelliJ IDEA.
* User: MD87020
* Date: Feb 16, 2005
* Time: 8:42:19 PM
* To change this template use File | Settings | File Templates.
public class DatabaseUtils
* Logger for DatabaseUtils
private static final Log logger = LogFactory.getLog(DatabaseUtils.class);
/** Private default ctor to prevent subclassing and instantiation */
private DatabaseUtils() {}
* Close a connection
* @param connection to close
public static void close(Connection connection)
try
if ((connection != null) && !connection.isClosed())
connection.close();
catch (SQLException e)
logger.error("Could not close connection", e);
* Close a statement
* @param statement to close
public static void close(Statement statement)
try
if (statement != null)
statement.close();
catch (SQLException e)
logger.error("Could not close statement", e);
* Close a result set
* @param rs to close
public static void close(ResultSet rs)
try
if (rs != null)
rs.close();
catch (SQLException e)
logger.error("Could not close result set", e);
* Close both a connection and statement
* @param connection to close
* @param statement to close
public static void close(Connection connection, Statement statement)
close(statement);
close(connection);
* Close a connection, statement, and result set
* @param connection to close
* @param statement to close
* @param rs to close
public static void close(Connection connection,
Statement statement,
ResultSet rs)
close(rs);
close(statement);
close(connection);
* Helper method that maps a ResultSet into a map of columns
* @param rs ResultSet
* @return map of lists, one per column, with column name as the key
* @throws SQLException if the connection fails
public static final Map toMap(ResultSet rs) throws SQLException
List wantedColumnNames = getColumnNames(rs);
return toMap(rs, wantedColumnNames);
* Helper method that maps a ResultSet into a map of column lists
* @param rs ResultSet
* @param wantedColumnNames of columns names to include in the result map
* @return map of lists, one per column, with column name as the key
* @throws SQLException if the connection fails
public static final Map toMap(ResultSet rs, List wantedColumnNames)
throws SQLException
// Set up the map of columns
int numWantedColumns = wantedColumnNames.size();
Map columns = new LinkedHashMap(numWantedColumns);
for (int i = 0; i < numWantedColumns; ++i)
List columnValues = new ArrayList();
columns.put(wantedColumnNames.get(i), columnValues);
while (rs.next())
for (int i = 0; i < numWantedColumns; ++i)
String columnName = (String)wantedColumnNames.get(i);
Object value = rs.getObject(columnName);
List columnValues = (List)columns.get(columnName);
columnValues.add(value);
columns.put(columnName, columnValues);
return columns;
* Helper method that converts a ResultSet into a list of maps, one per row
* @param rs ResultSet
* @return list of maps, one per row, with column name as the key
* @throws SQLException if the connection fails
public static final List toList(ResultSet rs) throws SQLException
List wantedColumnNames = getColumnNames(rs);
return toList(rs, wantedColumnNames);
* Helper method that maps a ResultSet into a list of maps, one per row
* @param rs ResultSet
* @param wantedColumnNames of columns names to include in the result map
* @return list of maps, one per column row, with column names as keys
* @throws SQLException if the connection fails
public static final List toList(ResultSet rs, List wantedColumnNames)
throws SQLException
List rows = new ArrayList();
int numWantedColumns = wantedColumnNames.size();
while (rs.next())
Map row = new LinkedHashMap();
for (int i = 0; i < numWantedColumns; ++i)
String columnName = (String)wantedColumnNames.get(i);
Object value = rs.getObject(columnName);
row.put(columnName, value);
rows.add(row);
return rows;
* Return all column names as a list of strings
* @param rs query result set
* @return list of column name strings
* @throws SQLException if the query fails
public static final List getColumnNames(ResultSet rs) throws SQLException
ResultSetMetaData meta = rs.getMetaData();
int numColumns = meta.getColumnCount();
List columnNames = new ArrayList(numColumns);
for (int i = 1; i <= numColumns; ++i)
columnNames.add(meta.getColumnName(i));
return columnNames;
}Anybody who lets the GC or timeouts or sheer luck handle their resource recovery for them is a hack and gets what they deserve.
Do a search on problems with Oracle cursors being exhausted and learn what the root cause is. That should convince you.
scsi-boy is 100% correct.
% -
I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!
Click here and request assistance.
(65879) -
My free Adobe Reader has expired. I tried uninstalling the Reader and installing the new Free Reader trial, but my system still will not open a PDF file and states I need to subscribe to Adobe. Any way around this?
Thank you.
On Thu, Jun 26, 2014 at 9:44 AM, Bernd Alheit <[email protected]> -
I bought Photoshop 7, upgraded to CS2 then upgraded to CS3. I live in the country and have limited bandwidth for my internet, therefore, the cloud will not work and I must have a box version. In Jan Best Buy did work on my laptop and did not de-install CS3, now my desktop has died and believe CS3 on it is also gone. I have the serial numbers and can not find how to contact Adobe.
I only use it for photography and do not want CS6, so I need help, can anyone help me. Thanks a million.Why on Earth are you getting frustrated? ?? !!
You don't even need to "contact Adobe", unless you need to activate that old deleted version. You are entitled to two activations.
Just download the CS3 trial version and input your serial numbers (the installer might prompt you for the previous serial number since your CS3 probably has an update s/n).
Download CS3 products <=== click on link
Anytime you want to look for something on the Adobe site, just do a Google search and add "site:adobe.com" (without the quotes) at the end of the string of keywords, for instance, this what to type in Google to find the CS3 downloads:
download Photoshop cs3 site:adobe.com
Just change "CS3" for whatever version you want.
Using the Adobe web site search function is futile.
Now, if you had two activations already, just call customer service and they will deactivate one or both for you—after quickly verifying your registration.. No big deal.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!
That's a good precaution, norm. It should be no problem is you have an object on a flat surface next to a ruler. It gets trickier in security camera frames.
Anyway that is one example. Anne can look further into the measuring tools of Photoshop Extended to see if it helps.
A note on the screen resolution thing. When I calculate the screen resolution, I go into Photoshop > Preferences > Units and Rulers
and enter it here in place of the default 72 ppi. Then when I use View > Print Size, the on-screen rulers will match a physical ruler.
That's if you wanted to look at the actual printed document size onscreen.
Gene -
Attach User define tables and view table need add to database into my add-o
Hi there,
I want to deploy an addon, there are User define tables and view table need add to database.
I need some advice on some issues..
1. Can I attach User define tables and view table need add to database into my addon.
2. I wonder which chance is properly to add them, if add these user define objects in time of install and I can't get the enough information that connect to SQL server
Thanks for any help.Hi Weerachai,
Here's an example of how to create a user-defined table in code. My suggestion would be to check if it exists when your add-on starts up and then if not, create the tables, fields and objects.
'User Table
Private Sub CreateTable(ByVal sTable As String, ByVal sDescription As String, ByVal oObjectType As SAPbobsCOM.BoUTBTableType)
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
Dim iResult As Long
Dim sMsg As String
oUserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
If Not oUserTablesMD.GetByKey(sTable) Then
oUserTablesMD.TableName = sTable
oUserTablesMD.TableDescription = sDescription
oUserTablesMD.TableType = oObjectType
iResult = oUserTablesMD.Add()
If iResult <> 0 Then
oCompany.GetLastError(iResult, sMsg)
MessageBox.Show("Error Creating Table: " & sTable & " Error: " & sMsg)
End If
End If
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
End Sub
'User Field
Private Sub CreateField(ByVal sTable As String, ByVal sName As String, ByVal sDescription As String, _
ByVal iSize As Integer, ByVal aFieldType As SAPbobsCOM.BoFieldTypes, _
ByVal aSubType As SAPbobsCOM.BoFldSubTypes, ByVal sLink As String, _
ByVal bMandatory As SAPbobsCOM.BoYesNoEnum)
Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
Dim oTable As SAPbobsCOM.UserTable
Dim iResult As Long
Dim sMsg As String
Dim i As Integer
Dim x As Integer
Dim bFound As Boolean = False
Dim oField As SAPbobsCOM.Field
oTable = oCompany.UserTables.Item(sTable)
For i = 0 To oTable.UserFields.Fields.Count - 1
oField = oTable.UserFields.Fields.Item(i)
'MessageBox.Show(oField.Name)
If oField.Name = "U_" & sName Then
bFound = True
End If
Next
System.Runtime.InteropServices.Marshal.ReleaseComObject(oTable)
If Not bFound Then
oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
oUserFieldsMD.TableName = "@" & sTable
oUserFieldsMD.Name = sName
oUserFieldsMD.Description = sDescription
oUserFieldsMD.Type = aFieldType
If aFieldType = SAPbobsCOM.BoFieldTypes.db_Alpha Or aFieldType = SAPbobsCOM.BoFieldTypes.db_Numeric Then
oUserFieldsMD.EditSize = iSize
Else
oUserFieldsMD.SubType = aSubType
oUserFieldsMD.Mandatory = bMandatory
End If
oUserFieldsMD.LinkedTable = sLink
iResult = oUserFieldsMD.Add()
If iResult <> 0 Then
oCompany.GetLastError(iResult, sMsg)
MessageBox.Show("Error Creating Field: " & sTable & "." & sName & " Error: " & sMsg)
End If
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
End If
End Sub
If you want to create a View I think you would have to use the RecordSet object. This will ensure that you don't have to log in to the database again
Hope it helps,
Adele -
Salary button and Statement of Earnings LOV will need to be removed ...
Hi,
the Salary button and Statement of Earnings Button will need to be removed from the Assignment screen
Salary History form from the Assignment form (Others button).
How can this be achieved?
Thanks,
Jai
Edited by: SaiMahadev on May 27, 2011 1:26 PMUse Forms Personalization.
How To Disable A Button On A Form Using Forms Personalization ? [ID 557602.1]
Unable To Disable Delete Button Using Forms Personalization's [ID 820138.1]
Form Personalization to Remove a Button From the Assignment Form (PERWSHSRG) does not Work [ID 1170414.1]
Information About the Oracle Applications Form Personalization Feature in 11i (Doc ID 279034.1)
How To Do Forms Personalization (Doc ID 468657.1)
Form Personalizations in Oracle E-Business Suite (Release 12) (Doc ID 395117.1)
Limitations of Forms Personalization (Doc ID 420518.1)
Thanks,
Hussein -
I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet
There is nothing anyone can do.
Sorry.
You will have to keep looking for it
Maybe you are looking for
-
I have 2 IDs. Can I swap IDs on my iphone / ipad?
Hi, I few years back I opened up an iTunes account, with Apple ID... [email protected] I purchased music on this account and more recently apps, etc. This is also the account I connect my iPhone and more recently my iPad to, to sync my music colle
-
LDAP + SSL + tomcat- Please help!
Please help I searched the whole site, i m new to JNDI, Security and E-directory, all I got was confusion, and lots of exception. Here's my problem, I trying to run a web application on tomcat web server. I have a login.html, for users to login to my
-
To find delivery quantity of materials delivered in batches
Hi All, When a material is delivered in batches to customers, where can i find the delivery quantities of these materials delivered in batches. Please let me know the table for this ? Also i have the material, production order, batches and inspecti
-
I'm no longer asked to match sequence settings in Premiere Pro CC when dragging clip to timeline
I don't know what happened but all of a sudden, when I drag clips from project into the timeline, I'm no longer asked if I want to match clip settings with sequence settings. How can I re-enable this asking feature? ---Trav
-
Can pat be enable at a fsb of 233?
Hello people when i set the fsb to 233 using the automatic setting in the bios for the ram and set the performance mode to fast i get great result.... but when i check my memory setting with cpu-z it's said that perfomance mode is disable. Enven if