Need to DELETE and LOAD data of the Last month to

Hi Experts,
I need to delete the last month data from cube because One material is not updated with a Required value. We have made some changes in Update routine for a Value. The Same change must be reflected from last month of data ,
So I need to delate the data based on selection. And reload the data again. And the data flows from
2LIS_13_VDITM (Info Source ) to ZSD_C03 (Info Cube).
I read many SDN threads, but I am getting confused.
How can I proceed for these ?
Thanks,
Utpal.

Hi Srikanth,
Thank you for responding.
I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   , 2LIS_13_VDITM   , 2LIS_12_VCHDR , 2LIS_11_VAITM .
And I need to delete data from 2LIS_13_VDITM data source . How Can I proceed for the current issue   ?
Please suggest   ...
Thank you ,
Utpal

Similar Messages

Look up two ODS and load data to the cube

Hi ,
I am trying to load data to the Billing Item Cube.The cube contains some fileds which are loaded from the Billing Item ODS which is loaded from 2LIS_13_VDITM directly from the datasource, and there are some fields which needs to be looked up in the Service Order ODS and some fields in the Service Orders Operations ODS.I have written a Start Routine in the Cube update rules.Using the select statement from both the ODS i am fetching the required fields from the both ODS and i am loading them to the internal tables and in the Update rules i am writing the Update routine for the fields using Read statement.
I am getting an error when it is reading the second select statement(from second ODS).
The error message is
You wanted to add an entry to table
"\PROGRAM=GPAZ1GI2DIUZLBD1DKBSTKG94I3\DATA=V_ZCSOD0100[]", which you declared
with a UNIQUE KEY. However, there was already an entry with the
same key.
The error message says that there is an Unique Key in the select statement which is already an entry.
Can any one please help me in providing the solution for this requirement.I would appreciate your help if any one can send me the code if they have written.
Thanks in Advance.
Bobby

Hi,
Can you post the select statements what you have written in Start routine.
regards,
raju

To enhance 0EMPLOYEE master data attributes, need to delete and load again?

Dear Support,
In order to meet business intelligence demands, I had three more attributes (region, time rate and worksite) to 0employee time dependent characteristic. The datasource to load 0employee attributes and its structure were enhanced to fill the new fields.
After first load, 0employee master data could not be activated. So I deleted 0employee master data, what I couldnu2019t do without deleting its data from transactional HR infocubes. I deleted transactional data and afterwards master data. I load it again and activated, with no errors this time.
This occured in development system.
Changes are about to go to production environment and deleting almost all transactional RH area infocubes and 0employee master data is something that we all want to avoid.
I am asking if there is a workaround in order to solve this without doing the stated time and resources consuming task.
Thanks in advance for your help,
Best Regards,
André Oliveira

Hi Andre,
You should be able to do a full load to achieve this. No need to delete the data. If there are corrupt data in BI with overlapping time periods, fix it by maintaining the master data. If corrupt data comes from source fix it in PSA.
Also you can specify to load the data for a time range only which might be easier than to load all history.
good luck,
vijay

Need to remove all app purchases from the last month.

My son took my ipod and bought over 200 dollars worth of goods from the appstore can anyone help my remove them?

You can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can use Settings > General > Restrictions to turn off in-app purchases and to require your account's password to be entered for every purchase (the default is a 15 minute period during which it doesn't need re-entering).

I am using Outlook 2010 on a PC with Windows 7 and was effectively using iclould to synch it with my ipad and iphone. Within the last month the connection to icloud stopped working.

I can still see Icloud contacts and calendar on my outlook, but it is not synching with the cloud. I can't seem to pinpoint when it stopped working. Help!

Are you sure that you have the iCloud control panel downloaded and installed?
You should also check the iCloud add in. Click the File menu. Then click Options in the left panel of the Outlook window. Click Add-Ins in the left panel of the Outlook Options window. Look at the list of add-ins beneath "Active Application Add-Ins" make sure "iTunes Outlook add-in" and "iCloud Outlook Add-in" are selected.
To add enable the add-ins, in the Manage box at the bottom of the Outlook Options window, select COM Add-Ins, and then click Go. In the COM Add-Ins dialog, navigate to the iCloud add in and and you should be able to enable them.
Once you have the refresh button, the push connection is ON again
Let me know if it work

Filter a List for data from the Previous Month

Hello,
I have audit data for each month of the year. At the beginning of one month I pull a report from the previous month. I would like to have a view in my SharePoint list that shows only the data from the previous month.
I am not a programmer or developer, so I was wondering if this is possible without out of the box tools.
Here is what I have done so far:
Created two calculated columns to find the start and end date of the previous month
Previous Month Start =DATE(YEAR([Date of Review]),MONTH([Date of Review])-1,1)
Previous Month End =DATE(YEAR([Date of Review]),MONTH([Date of Review]),0)
I have verified these two calculations do show the correct dates.
So I can generate the dates, but I don't know how to set up a view filter that will show only data from the previous month.
Please help.

What you need is the calculated column to display the start and the end of the next month, not the previous month. Then you can do a view filter where Start<Today & End>Today.
EX: If you have a document with date 15-03-2014, you need to save the dates 01-04-2014(start) and 30-04-2014(End).
Then If Start < [Today] and End > [Today], you can show the document

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847. It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email.
The other area to look at is your text messages. These are included in the backup. If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup. If that's the case, deleting these may make a big difference.

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

I just sinced up to an old iphone and it deleted all of my current iphones info and loaded all of the older stuff on it. How do I undo this???

I just sinced up to an old iphone and it deleted all of my current iphones info and loaded all of the older stuff on it. How do I undo this???

Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

TS1559 i have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

I have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

If you have never connected the phone to iTunes and backed it up or used iCloud to backup your data, it is lost at this point.
The only way to get back into the phone is to restore it.
~Lyssa

I accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Need to DELETE and LOAD data of the Last month to

Similar Messages

Maybe you are looking for