Need to delete Plan type

Hi Guru's,
I want to delete a specific plan type in the planning application. Planning application is running fine. I have two plann types
1). Type_1
2). Type_2
I want to delete Type_1. Thanks in the advance for the help !!!
Happy and Prosperous New Year !!!!
Gurpreet

Hi,
It can't be done without hacking the underlying repository tables and removing a plan type is not advisable by that method. There is no easy script to be run for what you are trying to achieve
I always advise rebuilding the planning application is the way to go.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Issue with plan type...

Hi Guys,
Unfortunately, I have clicked the "initialize workforce" command in planning webclient (v.9.2). Workforce plan type had been created. If I delete plan type now, What are implications i will see. please suggest me what to do.
Advance many Thanks,

To disable Workforce:
- Edit the HSP_SystemCfg table in the application relational DB and change the values of the following fields to the given respective values. Before updating the table ensure that database backup is there to restore from in case there is a need to do so.
- MODULE_SUPPORTED to 7
- MODULE_ENABLED to 7
- WF_KEY to NULL
- WF_OPTIONS to 0
- Go to the registry.properties usually located in C:\Hyperion\common\config and comment out the following line:
- PLANNING_WRKFORCEPLNG_OPT=false,false
This property is application specific and not user specific.
Cheers,
Jasmine.

Can we transport deleted planning areas acorss landscape

Hi All,
I am new to SEM, I have to delete some planning areas and same has to be done across the landscape.
Can i delete planning area and collect to request and transport or do i need to delete planning areas in each system.
Any help greatly appreciated.
Cheers,
Suresh.

Deleted objects will not be deleted on your target system, so you have to do it manually.
Hope it helps.
Regards

About billing plan types

Sir ,
I have a need of Billing plan type configuration step by step,i have tried to configure throgh glenc willams but i couldn't able to understand.
Kindly send me the configuration of billing plantypes and explain me in which situation these are applicable.
Thankig u

Milestone billing means distributing the total amount to be billed over multiple billing
dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of
the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a
billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and
cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone
billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the
individual milestones.
IMG configuration requires :-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System
confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the
basis of the requested delivery quantity and not on the total of the confirmed quantities.
The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
To display the project-related data for a schedule line, proceed as follows:
In one of the overview screens of the sales document, select
1. Item -> Schedule lines.
2. Mark the schedule line and select Procurement details.
The following figure shows an example of milestone billing where only the Contract have
been billed :
Order Item Turbine 100,000
Billing Plan
Billing date Description % Value Billing Block Milestone Billing Status
01-10-94 Contract 10 10,000 - x x
01-03-95 Assembly 30 30,000 x x
01-04-95 Maintenance 30 30,000 x x
01-05-95 Acceptance 30 30,000 x x
01-06-95 Final invoice .. .. x
Network/Activities
Milestone Estimate Actual
Assembly 01-03-95 01-03-95
Maintenance 01-04-95
Acceptance 01-05-95
For each billing date in a milestone billing plan, you can specify whether the billing
date is:
1. fixed
2. always updated with the actual date of the milestone
3. updated with the actual date of the milestone, if the date is earlier than the
planned billing date for the date

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

Judy-
If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
Or changing Settings-Safari-Autofill to OFF.
You might also try Settings-Safari and Clear History and Clear Cookies and Data.
As you can see, there are several controls for Safari. Which one works depends on what your problem is.
Fred

Delete Level 0 from one plan type only

Hi
I'm using 10.1.3.6 and wanting to know if it is possible to delete Hyperion Planning metadata for just one plan type only? I have tried by entering a '1' against the plan type and using 'Delete Level 0' but the result was that it removed the code completely, even from the plan type that I wanted it to remain in.
Your assistance is appreciated.
Cheers

If you use the delete option it will delete the member totally.
What you would do is perform a standard metadata load and update the plan type properties, so put 1 or 0 against the plan types you want the member to be associated with, remember you are still are under the constraints of planning so what you are trying to do has to be valid in planning.
Cheers
John
http://john-goodwin.blogspot.com/

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

AppleFAN7591 wrote:
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

New feature aso plan type under planning V11.1.2.3

HI all,
I notice than there new feature under planning.
the ability to create ASO plan type under planning.
but in documentation i don't understand if this part is not available under planning licence .
is this new feature involde to purchase new licence on essbase and in this case we have application user wich licence is needed (cpu) ?
can some one help?
on URL Introduction - Oracle EPM System 11.1.2.3 Documentation Library
extract of
Oracle Hyperion Planning New Features
HTML
Aggregate Storage Option Support
Administrators can now add an aggregate storage option (ASO) database to a Planning application using Planning application administration.
Administrators can create an ASO plan type during application creation, or they can add a new plan type using the new plan type editor. See Plan Type Editor. Write back to ASO cubes within Planning is supported.
Note:
To use ASO databases in Planning, you must have the required license.
on doc I
Oracle Enterprise Performance Management System Licensing Guide
PDF
Essbase Plus cannot be used to create Essbase cubes that do not
contain data used by the Hyperion Planning Plus application.
l The Aggregate Storage Option component of Essbase Plus may not
be used.

You also need the Essbase license to be able to use that functinality, probably best discussing with your Oracle account manager for the full details.
Cheers
John
http://john-goodwin.blogspot.com/

Can a Financial Plan Type be attached to more than one Project Template

We are working on Project Accounting through Self Service pages. For doing the Cost Budget we have created a Financial Plan Type. We attached it to a Time & Material Project. But later when we tried attaching it one more template, a Turnkey Template, it does not give us the Cost Budget-Financial Plan type in the drop down box.
Hence, wanted to know whether we can attach a Financial Plan Type to more than one Project Template??? If yes, then why didnt we get the option in the drop down box?
Chirag..

Since you are not using Company code as the branch, and are using Profit centre as the branch, I dont think its right for you to set a default profit centre for any GL account in the Chart of Account for that company.
all the SAP user in the company will be using the same company code to post, and thus, will be using exactly the same inventory account, if you set a default profit centre there, no point rite? You will need to implement a procedure to ask all the user to manually assign the profit centre during posting. Just like how we normally ask user to specify the company code before posting.
The authorisation should be set by profit centre as well. hope this helps. Thanks.

How to create dynamic calc account in multi-plan type application

Hi expert,
I have a planning application with 3 plan types.
I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
It does not has this kind of session if I change the account to "store".
Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
Many thanks!!
My HP application is on version 11.1.2.1.

Hi Jake,
Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
Many thanks!!!

User needs to delete a line item from old STO

Hi all,
User needs to delete a line item from old stock transfer order and would like to be advised what he needs to do to delete the line item from the STO.
On the STO, Goods Issue done and reversed also. Delivery completed indicator not checked. I aslo found that the payment has been made for the line item 40 for Freight. Carrier charges. It seems that the payment has been made/cleared to the vendor. I think Due to this reason they are unable to remove this line item from STO. They have attempted to delete or block an item that is not yet closed. All down (advance) payments made to date have been taken into account.
Can you please advice how to resolve this problem?
Thanks in advance..
Regards
Suresh

Hi,
Delivery completed tick is also there for STO PO. If you are not getting it then check settings. Also you can mark deletion indicator for that line item. Or minimise quantity to goods received quantity.
For STO if delivery is made from delivering plant but Goods receipt not done in receiving plant then that material remains in transit. Can viewed with ME5t. In this case that line item cannot be delted or delivery completed.
Still your client wants to complete these type also better to leave decision to business if they want to reverse delivery (Stock of issuing plant will increase) or make Gr ( Stock of receiving plant will increase) Although they can adjust later with physical inventry process and make stock in system to real physical stock
Regs,
Appie

Keep getting a popup window stating" startup disc almost full, need to delete files"

keep getting a popup window stating" startup disc almost full, need to delete files", what can i do to help with this, i generally have only photos in iphoto, some imovies, and a small amount of documents

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

Deleting order type dependent parameters

While deleting ordr type dependent parameters, the system is giving the foll error:
Deletion not permitted. An order still exist for plant XYZ and order type XYZ

I don't know if your project lead has approved of the steps you're taking. All I can say is you're setting yourself up for more trouble.
I don't know how far you have proceeded with this process & what all you have deleted, but if there is still time, I would strongly suggest to disband your present approach & instead work with your basis team to remove authorization for all activities pertaining to this plant for PP scope. At a later date if you wish to re-start the activities relating to PP, basis would just need to re-assign back the roles.
Anyway the above is just my personal views, I leave it your wise judgement.

Error in CREATE_DRAFT_FINPLAN Plan Type: Approved Cost Budget. Before you c

I am getting below error when I call "pa_budget_pub.CREATE_DRAFT_FINPLAN"
api to create a COST budge
do I need to call any other API to create PLAN_TYPE.
pls. help me if anybody has an idea
Project: 60040107; Plan Type: Approved Cost Budget. Before you can create a plan version for the plan type, you must add the plan type to the project.

Can you add the plan type in the project or template? That would be better than an API call.
These need to run to perform a budget upload...
- pa_interface_utils_pub.set_global_info
- pa_budget_pub.init_budget
- pa_budget_pub.create_draft_budget
- pa_budget_pub.baseline_budget
- pa_budget_pub.clear_budget

Need to delete Plan type

Similar Messages

Maybe you are looking for