Need to determine plant and storaeg location for item in delivery

Hello All,
I have an inbound IDOC which changes the quantity of items in a delivery and also adds new items if necessary. I need to do a auto PGI also if required.
Am using BDC to update the delivery. Now the problem is when I add a new item to the delivery. I add the material, quantity and Unit recieved from the IDOC. I need to determine the plant and storage location and fill that too in the delivery.
Kindly let me know how I can determine these two values. Which table holds this data?
Please note that I am changing only the delivery. The document preceding the delivery wont be changed.
Thanks for your help.
Regards,
Johnson

normally the plant is determined on this basis:
customer inforecord (table KNMT)
customer master (KNVV)
material (MVKE)
The storage location is determined in table TVKOL based on:
shipping point (you have it in delivery header LIKP-VSTEL)
plant (see above)
storage conditions (material master MARA-RAUBE)
regards
Roberto

Similar Messages

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

Material document ,quantity and stock location for a given material

hello all,
i have a requirement like this.
in the selection screen i have,
material.....
plant....
posting document date.....
i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
what tables do i need to use..
do i need to use any BAPI or Function module..
thanks in advance...

Hi Vinay ,
Look into table MKPF & MSEG for material document
anf for quantity in MARD
Regards
Yogendra Bhaskar

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

Table to link in b/w plant and purchase org for material?

Hi Gurus,
what is the table to link in b/w plant and purchase org for material?
I want to know the materials available for particular plant and purchase org combination..
thanks in advance..

hi
plz check that the materials are created on basis of PLANTS
so u can get list of materials plant wise in MM60
now this plants may be assigned to different P Org ,so u have to find that PO to plant linkage
if u need all this on one report then try to create a new z programme or use query writting
regards
kunal

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

To identify a equipment based on material, plant and functional location

HI Gurus,
I wanted to identify whether there is any equipment is already created for a given material, plant and functional location. can you tell me how to findout?
Thanks
satya

Hi
Check with respect to material and serial no : TCODE : IQ08 or IQ09
Try in IH08
You can define material, plant and functional location
- Pithan
Edited by: Pithan Pithan on Mar 31, 2009 4:13 PM

Unable to set plant and storage location in Batch as required/mandatory

Hi Experts,
I am having a problem regarding field controls.
I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
I have follow the path below
SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
What i can see is field groups are being assigned to field name.
My question is, where do we go to to set the field group?
Thanks in advance!

Hi Dex,
You have gone to the right location.
On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
Hope this helps.
Tarang

Search shopping cart by plant and storage location?

Hi,
is there any standard report or anyway to search the shopping cart based on the plant and storage location..
please let me know..
thanks

Hi ,
Not directly as Yann says.
But indirectly
from SRM org structure -> ex attribute -> location
go to yr desired plant
get all the employees assigned to this plant
In admin log in -> monitor shopping carts
use these employees as requestors
and search
let us know if it suits your need
BR
Dinesh

Combination of Material,Serial Number, Plant and Storage location

Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
Kartavya

Hi,
Please check table EQSE (OBJK -> EQSE).
Regards,
Ferry Lianto

How to create HUs and input SNs for a Inbound Delivery by BDC or Function?

I need to create HUs and input SNs for Inbound Delivery Order as VL32N.
At first, I create a BDC program using T-code VL32N, it does work for a few HUs in one Order, but when there are more than 5 HUs in one order, the later can't be input by this program, because the table control of HUs only display 5 records in my screen, so it need page down during BDC process, while in Ttl content, there 16 rows displayed, it need page down after 8 records. But different user have different screen size, so my program doesn't work for all user.
What should we do for turn page in BDC program?
OR
Is there any function can be used for creating HUs and input SNs for Inbound Delivery?

How did you solve this issue, Can you give me some clue?
Regards,
Mohan

How to manage multiple locations for Item (Management warehouse locations)

Is there any way, with UDF and Formated Search, to manage multiple locations for Item in the same warehouse
I must have several (at least 2) locations for the item in the Warehouse and that i enter in goods receipt and have track of this location and search possibilities at sales order by item and WHS.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables and there is a relationship between all.
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
a piece of code has been proposed, but it is not so simple
SELECT T0.U_Location FROM [dbo].[OITM] T0 WHERE T0.ItemCode = $[$38.1.0]
Thanks,
Ouchen

I believe you are talking about defining BIN's (locations) within a Warehouse.
This is quite possible and has been explained / discussed on this Forum a few times in the past. Though I am completely clear on how you would like to implement this I could give you some guidelines..
Creating a @location UDT is correct to maintain list of warehouse locations
UDF in Items - Warehouses (Item Master ..Inventory Data Tab..Rows)
UDF in Marketing Document Rows (When you add a UDF here U_Location then this will available in all marketing documents, both AR and AP)
You will define a location for an Item in the Item Master....
In the GRPO..you can use FMS to list the location/s for the Item being received from the Item Master and the User can Select it.
In the Sales Order, you can select the location from which the Item could be picked..
Let me know if your process / ideas are different
Suda

Need to determine plant and storaeg location for item in delivery

Similar Messages

Maybe you are looking for