Need to determine which project files uses a video file

Short of going through each of my FCP project files one by one, is there any way to find out which of my project files uses a particular video file?
Thanks,
John Link

As long as it has a name you can search for it.
The problem is not to find a media file, it is to find all the project files that use a media file. Thanks, cometmace, for providing a solution to that problem, and welcome to the Apple Discussions.

Similar Messages

Need to determine which partner function level is pulling in the currency (

need to determine which partner function level is pulling in the currency (sold to, ship to , bill to or payer)on sales invoices
Also I my requirement is to have different currency based on different ship to party for same sold to..then how set up the same

Hi,
Yes, that is true. The field borders are not drawn when there is no data for that field.
Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
space(1) else totext({database_field})
You can then apply borders on this field and you'll see that the field draws the border when there is no value.
If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
-Abhilash

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to edit a line in a file using a batch file??????

Basically i want to edit one line in a properties file, using a batch file, Here is what it says
#Minecraft server properties
#Tue Feb 22 15:58:36 PST 2011
level-name=world2
hellworld=false
spawn-monsters=true
online-mode=false
spawn-animals=true
max-players=5
server-ip=5.196.238.77
pvp=true
server-port=25565
white-list=false
The IP address needs to be changed, i have a hamachi server and a server for home but i need to change this to my ip address on my computer wich is 192.168.1.74. This needs to be changed back and forth so how can i make a batch that just runs and then done its been changed.

There are no .bat files in a Unix environment
#!/usr/bin/env bash
export NEW_IP=192.168.1.74
perl -ni -e '
s/d.d+.d+.d/$ENV{"NEW_IP"}/;
print;
' yourpropertiesfile
Make sure you change the file's protections so they are executable
chmod +x nameof_yourscript
There are other ways to do this, I just choose a perl script within a bash script. You could do it all with a bash script, you could use awk, you could use sed, you could use python, ruby, etc...

Using a video file in Flex ?

I've been trying to use one video file in my flex project but the problem here is that after giving the source location it's not showing anything except a black pane and the format of the video file is in .AVI.I'm using VideoDisplay class to show the video.
Any help on this guys...

Just check it with the .flv files. If it works fine for them
then your code is fine and you have to search for your format or convert it in flv my any means.
with Regards,
Shardul Singh Bartwal

Importing multiple files using the Import File menu.

For some reason I am never able to add more the 5 mp3 files using the Import File menu. All of my files are located on the NAS device and if I select the Import Folder menu all the files in the folder will be imported. However, time after time I add more files to the same folder and then need to import just the new files to iTunes. For that I am using the Import File menu. If select more then 5 files, only 5 files will be imported. Some times I have 100 new files that I want to add, and moving 5 files a time is time consuming and painful. I try opening the folder, selecting all files and dropping them into iTunes, but that did not work. Is there a way to import more than 5 files at a time, or iTunes is not capable doing that?

I am often surprised how many ways there are to add songs to iTunes. Selecting a number in the open file dialog must have a maximum string length for the file names. I bet that the path and file name are long on those songs and that is why you can only load 5 at a time from your NAS. What I have had luck with and is very easy is to select a group of songs and right click and "play" them. My iTunes is set to import and organize on play. The first song starts playing and they all load. I routinely do this with entire albums without problem.
Paul

Project Settings for Multiple Video Files?

In PRE 8, I am attempting my first HD project. I have several different types of video files that friends sent me from a sports event, the video files are AVCHD (1920?), QT Movie (1280x720), and QT Movie (1920x1088). When I create a new project, what PROJECT SETTINGS should I select? I am not sure what to select since I am using different video file formats. The video files are currently on my hard drive.
I also have lots of pix (jpg) from different cameras, some are as large as 5184x3456. For the picture files, should I bulk process them through PSE to resize them? If so, what should the maximum size be for the HD project?
Thank you in advance.
Howard

Hi Steve - in the list of NTSC project presets, there is not a "DSLR" selection; there is "AVCHD", "DV", "Hard Disk/Flash", and "HDV". Am I missing something?
As you suggested, I used the "AVCHD 1920x1080" preset for the Vixia files. I imported one 9-second file in the project as a test and the video is choppy after rendering. I have a new HP computer with an I7-930 quad-core processor, 8GB RAM, and an ATI HD 5770 graphics card so I think there is enough cycles to process the video files. Any suggestions?
Thank you very much for answering my questions on a Sunday.
Howard

I have backed up my iPad using iTunes to windows 8 Lenora laptop but I could not find my files and play video files in my laptop.

I have backed up my iPad using iTunes to windows 8 Lenora laptop but I could not find my files and play video files in my laptop

You cannot access files in the backup on your computer.
Do you mean that you synced with iTunes and transferred your purchased videos and app documents? If that is what you mean, what videos are you talking about? If they are videos that you took with the iPad, they do not sync to iTunes. What files?
What exactly are you trying to do? Details please.

I have lost many of music files and some video files in i movie projects after downloading the Maverick

i have lost many of my music files and some video files from i movie projects,after downloading OSX 10.9 Mavericks .My previous Original i movie has lost some also. The projects just have a green bar where the music files were. The system says cannot locte missing file.

See Recover your iTunes library from your iPod or iOS device.
tt2

How can I download music files (MP3) and video files (AVI) to iPod Nano?

I just want to download music files (MP3) and video files (AVI) to my son's iPod Nano and iTunes has all menus grayed out, can't get on Apple support site to upload diagnostics file. Driving me mad - should be simple... Please help!!! Dump of diagnostics below:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
INTEL_ DG41RQ__
iTunes 11.1.3.8
QuickTime 7.2
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9B00CB27BC0
Current user is an administrator.
The current local date and time is 2013-12-22 23:15:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
ATI RADEON XPRESS 200 Series
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {E4F794BB-151F-490C-8AC0-1EDB6DA3718A}
Description:             D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) - Packet Scheduler Miniport
IP Address:              192.168.5.104
Subnet Mask:          255.255.255.0
Default Gateway:     192.168.5.1
DHCP Enabled:       Yes
DHCP Server:          192.168.5.1
Lease Obtained:      Sun Dec 22 21:35:11 2013
Lease Expires:         Mon Dec 23 21:35:11 2013
DNS Servers:          91.216.105.75
                                216.93.191.228
Active Connection: LAN Connection
Connected:              Yes
Online:                     Yes
Using Modem:         No
Using LAN:              Yes
Using Proxy:            No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: LITE-ON DVDRW SHW-160P6S, Rev PRS2
Drive is empty.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller
Connected Device Information:
IPOD (K:\), iPod nano (7th Generation) running firmware version 1.0.2
Serial Number:         DCYK27TGF0GT
Bus Speed:              61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi fkerrin!
In case you haven’t already tried this process before, here is an article for you about syncing media to the iPod:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How do you lock a wav file to a video file in imovie?

I am importing separate wav and video files. How do I lock the audio file to the video file after I sync them so that when I cut any video the audio stays in sync? Or is there a way to embed the new audio into the video footage?

You can do that in Final Cut Pro X, but not in iMovie.
A good workaround in iMovie is to line up the WAV file with your video clip. Then use SHARE/EXPORT USING QUICKTIME/Movie to QuickTime Movie/Options/Video Options/Compression/Apple Intermediate Codec. Save this file to a place you can find it. Then import it back into iMovie using FILE/IMPORT MOVIE...

How can I determine which codec to use?

I'm using PE7 on a PC. I have HD video shot with a Canon. Each video - there are six of them - is less than five minutes. After I finished editing, I uploaded them to youtube and emailed a link to my client, but my client complained that they were out of focus. I explained that it was the compression that youtube uses, and that I'd render them to disk for him to look at.
Trouble is, I can't figure out which codec to use. All I know is that I want clear, sharp video, suitable for posting on the net. These are scientific videos, showing some chemical processes involving gasoline with ethanol and water.
Can someone point me in the right direction?
TIA

I guess I need to explain better. The HD videos I'm editing will not end up on youtube, but will be posted on a government agency's website. I originally posted them on youtube just so the client could take a look without me having to attempt to email large video files or burn to disk, since the client is in a different location from me.
The area of video editing and production that I'm the least knowledgeable - and therefore the most insecure - is when I attempt to render and save a video. Every video project I go through the same frustration of having a project that I'm happy with, but having a final product that either 1) does not look at all sharp or 2) results in a file size which is too large. In this case, since the final video files will be posted online, they need to be small enough for viewing over the net while maintaining enough sharpeness and quality that the video does not look out of focus.
If you take a look at this video, for example: http://www.youtube.com/watch?v=t_X0IKPJrng you can see why my client thought it was out of focus. However, I know that the original footage is very sharp.This link is only temporary, as I've already been told that the agency I work for will not allow them to be posted on youtube.
So, my question is, when I'm rendering and saving a video project from PE7, how do I know what settings to use for the highest quality, yet smallest file size? The manual does not go into much detail about the pros and cons of various codecs, nor does it say much about what settings do what. It's like Adobe expects me to already know this information.
Is the problem with the video above simply that youtube compresses the videos I upload? Is Vimeo a better site to upload videos and maintain sharpness? In PE7, is there a way to set it up to upload to Vimeo, or should I render and save as an MP2 or MP4 file and then manually upload?
Surely there's a site which goes into much greater details about the various settings I can use in PE, and how those settings affect the final viewing product.
Thanks a lot for your help. I realize my questions show an extreme lack of experience, but that's why I'm here, right?

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

Need UCM service which has to return all the files in the Folder

HI,
I need a webservice which has to return all the images/text files in the folder. I ll pass folder name has a input parameter..once i got all the files i have to shown those images in the web page.
Do we have any service with this requirement?? Or
i have to use 'Seach' service ,Which has return all the files meta info ...with this info do i have to use GetFile service for displaying data??
Any suggestions??
Thanks

Hi Jiri,
I dont know abt folios..I ll go thru it now..
When coming to the option a)
When we are calling Search service it will return resultset which contains meta data(Filename,File Id,URL,etc.....) for list of files in the folder. Now what i do to display image is , using this URL i ll bulid image object using this URL and i ll display it on the webpage(This web page contains Silver light component to display these images.)
I m assuming problem with this one is every time when i m building image i m hitting the the server to construct the image. Instead im trying to get the all the images in one shot when i pass folder name??
I doubt myself wether my assumtion is correct or not...
any suggestions plz..
Thanks

Need a help: how to recover using backup control file?

Please a help:
First computer
1. I create a database
2. put it in archive mode,
3. shutdown and made a cold backup
4. Created backup control file (alter database backup control file to trace)
5. I started up and created some archived log files.
Second Computer
1. I copied all files created in the step 3 above except the control file
2. I create all the same map directory on the 2nd computer as in the 1st computer
3. I recreate the control file from the script got in the step 4 above
4. I Copy archived log files generated at the step 5 in the local directory in the second computer
5. I set the logsource and set the autorecovery to on
6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
Error got:
the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
Thank you very much

archived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
1 553723 555484
2 555484 557345
Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
17 CHARACTER SET WE8ISO8859P1
18 ;
Control file created.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> set logsource C:\local_destination1_orcl
SQL> set autorecovery on;
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
ORA-00289: suggestion :
C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
ORA-00280: change 555611 for thread 1 is in sequence #1
ORA-00328: archived log ends at change 555483, need later change 555611
ORA-00334: archived log:
'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
Idon't know where the change 555611 is coming from?

Need to determine which project files uses a video file

Similar Messages

Maybe you are looking for