Need to dial 5 extensions at the same time in case of emergency

Hi, our company uses Communications Manager 8.6.2 and has a requirement which I haven't been able to fill using normal methods.
We need to call 5 mobile numbers at the same time when an emergency exists at our location. Only one of the 5 called numbers has to respond to the call for help in our 3 km long, 2 kilometer wide company site.
Thought 1 line number with remote destinations would work but this doesn't seem to handle multiple mobile numbers well. Strangely, it doesn't ring all lines at the same time. It will ring max 2 mobile phones at the same time in our test. There were enough free lines on the PMX to dial out to all phones during the test period.
Doesn anyone have this situation and how did you handle it?
Thanks,
Randy

Hi, Thanks for the quick responce, unfortunately we dont have contact center installed. Actually we would like one DN number for these 5 people, because these people are continually moving around their respective areas, there is no physical local endpoint.
When the number is dialed it should ring out to the 5 mobile numbers, when one answers the others should stop ringing.
We could in theory install the uccx solution but this will cost some time to get up and running and at present we do not have any additional need for uccx.
Randy

Similar Messages

Forward two different dial numbers at the same time to the same destination

Hello everybody,
I need to forward two different dial numbers in the same phone (Cisco 6921) to the same destination.
I'd change the phone if it'll be necessary.
Forward from the end user web is not a valid posibility. It is neccesary to do this forward from the phone.
Any idea, suggestion or testing scenario should be appreciated.
I use CUCM 8.5
Thanks in advance.

you can mask the other number by using translation pattern

HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope at the same time,
I know this can be done but I have forgotten how

Don't use any full screen options for any app that has them
Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

I have a pdf. document with 100 pages. These are white postcards with addresses. I need to move all the address farther to the left. How can I move them all at the same time?

1) I need to drag the same text on 100 pages at the same time to the same place. Is there a simultaneous way I can do this? the pdf file has 100 pages of a 4x 6 posta cards that contain addresses: one address per page, I need to select all addresses and at the same time move them to the same place within the postcard. I can select the text on one card (page) at a time and drag it to the desired place. The PROBLEM is that I need to do it at the same time on every page. otherwise it takes too long. PRODUCT IS ABOBE ACROBAT

This it not the kind of editing task that one should do in a PDF file. It is not meant to be edited in such a way.
You should try to get the original file used to create the PDF, edit it and then create a new PDF from it.

Can the airport express be used to stream music and act as network "extender" at the same time?

I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

Yes, it can. You can either:
Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

Cannot get dual sound sources playing at the same time

Hello
New to Arch. I am trying to play a web based flash source and a web based java source at the same time. I can get both to play seperately but when I have both running only the first one opened has sound. I also installed pulseaudio-gnome, alsa-plugins, Firefox codecs and plugins. Below is my sound devices. Thanks for your reply.
lspci|grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

Try playing each of your apps. Do they show up in 'Playback'? What sink is selected, for each of them?
Why do you have 'Simultaneous output' anyway. Do you have multiple devices at some point in time that you need to output to at the same time? What modifications have you made to your pulse configs, or to your .asoundrc?
In other words, have you read and applied the Pulseaudio wiki.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

I am trying to create a button in flash that will display 4 separate images at the same time when clicked. I can't get the images to stay on when I take the mouse of the button. I need the actions script code to make this happen.

I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time. I can get the images to appear when I click the button but they will not stay on the screen. I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code. It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
Thank you in advance
AP

It is not clear how you are trying to realize this from your description. If you are trying to create this within a button symbol it will not work. Explain your approach and if there is code involved, show what you have so far.

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

Need help recording three shows at the same time

I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan

DocAlan02 wrote:
I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan
I have a similar setup with a Replay.
You will need to get a Verizon Digital Adapter for $3.99 per Month and an IR Blaster for your Tivo.
Connect the Digital Adapter (DCT-700) to the FIOS Coax (May need to use a Splitter). Connect the Composite Out cables from the DCT-700 to the Tivo. Connect the IR Blaster from the Tivo to the front of the DCT-700. Configure the Tivo and tell it you have FIOS Cable and Digital Adapter. You may need to find the right codes to use to control the FIOS box from the Tivo.
Once you get it configured you will be able to tell the Tivo to record the 3rd program and it will switch the box to the channel and record it. If the box is near your other Verizon STBs you will need to hide it or cover the IR Sensor so that the remote for the main STB does not control the Digital Adapter.
As an added bonus you can connect the Coax Out from the DCT-700 to your Main TV if it has PIP and now you have a 2nd input source to make PIP work.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Need to run windows OS on my macbook pro at the same time with MAC OS. what do i use

I need to run windows OS & office so i can access my company server. What is the best platform to use & which will enable you to run both oS at the same time.
Thanks

Depending on the specific features that you think you need in a Virtual Machine, you should research the paid "Parallels" and "VMWare Fusion", and the free yet very capable "VirtualBox". I personally use VirtualBox because it does NOT include all of the Mac-to-VM interactivity features that the others do. For performance and security reasons, I specifically do not want my VM to be able to interact with my Mac OS host in any way other than copy and paste.
On your Windows VM, if you are running windows 8.1, and are not logged in as an administrator as your primary account, then the built in Windows Defender is a perfectly suitable for anti-malware protection. If you are running Windows 7 (or 8.1) and want additional protection I would recommend "BitDefender Free" as it has great protection yet has a very light-weight performance hit.

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

Hello, thanks for replying.
Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe here:
Trouble installing iTunes or QuickTime for Windows
iOS: Device not recognized in iTunes for Windows
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Help - Need Line in and Aux inputs active at the same time..... Audigy SE

The company I work for purchased 3,000 of the Audigy SE? SB0570 sound cards to replace our aging original SB6 PCI cards used in our call centers. The application and Hardware require that the AUX connector and the Line in connector are both acti've at the same time in order for things to work properly.
Problem is that when I go into the mixer settings (or windows volume controls) when I select one of the inputs to go acti've, it mutes the other two inputs (mic, line-in, or AUX). Does anyone know of a work around to let me activate the AUX and/or Line-in/Mic at the same time??
Our workstations run Windows 2000? (but as a test, I?loaded up another PC with XP SP2 and it exibits the same problems)
Thanks in advance for your help.

We are using the internal AUX in connector to take audio from a vendors custom card, and at the same time we have to take audio in on the flexi-jack input on the rear of the card. The original SB PCI cards we have been using for 5 years allowed us to do this, but these new ones do not. I wrote an e-mail to Creative Tech support and here is their response: Basically it is a no go, so I am now looking at other manufactures that can support our requirements. Good news is that I contacted our supplier today and they are willing to take back all of the cards that are still sealed in their original packaging... about 2,800 of them.
Dear Harry
Thank you for reaching us at Creative Email Technical Support; we appreciate the opportunity to assist you.
Based on your description, I understand that you are unable to use AUX IN and Line In/Mic In simultaneously.
I would like to apologize for any inconvenience and seek your understanding, and are certainly thankful that you have taken precious time to bring this matter to our attention.
Please allow me to assist you with regard to this issue.
For your information, you are only able to use one of the option at a time.
If you are trying to do a Recording, you may select "What U Hear"
option.
I hope the above mentioned solutions will be able to resolve your issue.
If you still require assistance, please reply to this email with any previous correspondence to ensure the quickest and most accurate service.
Best Regards,
*removed*
Technical Support
Creative Labs Americas
To provide feedback on your "Creative Experience" please click on the following link:
http://www.**bleep**.com/support/contact/welcome.asp?r=CLI&d=TS[/u]
This link is provided so that you may provide feedback on your "Creative Experience". If you require further troubleshooting or have additional questions simply reply to the original mail and we will be glad to assist you.
Admin notes: Removed the name of the support advisor for their privacy.
Message Edited by KokChoy-CL on 0-22-2009 0:57 [email protected]

Need to dial 5 extensions at the same time in case of emergency

Similar Messages

Maybe you are looking for