Need to disable auto printing of "comics" app

Set up my new Office Jet pPro 8600 last weekend and have noticed that a comics app prints daily. I did not do anything to schedule this, yet the app shows that it will print daily at a certain time. I could use some advice on how to disable this, as I am not interested in wasting ink to print comics that I am not interested in reading.
thanks for any advice/help!
Brad

These kinds of apps are called "Scheduled Deliveries". 
You can unsubscribe from them by
signing on to the eprintcenter at http://www.hp.com/go/eprintcenter
select your printer
scroll down to the "My Print Apps" section and you should see a list of apps. This would most likely have "comics" in the title in your case
Hover over the comics app and click on the "Remove" button in the upper right corner of the app icon.
You should no longer receive the comics.
I work for HP

Similar Messages

  • To Disable Auto Print In ME29N or ME28

    Dear Gurus,
                           I gave auto print option in Po.Now my client wants to disable that,i disable in ME23N but i dont know how to disable auto-print in ME29N and ME28. Is there any configuration available or i need to do that with  a programmer.
    Plz Explain.
    Thanks in adv.............

    I think in your PO process it is not printing because the PO is subject to release strategy
    the release in ME29N does not have a own message determination.
    the only thing what happens is that the release "erases the print lock".
    if your message record in the PO has the setting to print immediatly (4) , then it prints when ME29N is saved.
    if your message recoprd in the PO has the setting 3, then it prints when you execute ME9F
    This is totally dependend on your message condtions.
    Of course a change in your message conditions will only effect POs that are created after this change, Unreleased existing POs are not effected and will print with the old settings (because the message record already exists in the PO)

  • Need to disable auto sms

    Hi
    Need to disable the auto forward of a single message to my 'contact list'. I have not done any change to the sysytem, except a change in my 'tariff plan'. Probelm triggered since then.
    My contacts are telling that they are getting a same message, over and again.
    Message starts as - Protect your Mobile with Mobitracker.
    Then it gives some IMSI number as well as IMEI number.
    Can somebody help me in disabling the same?

    Although you would need to backup essential data, you could always reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Just wondered whether change of tariff has been recognised by MobiTracker as change of SIM causing it to send out alert.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Disable duplex printing in Oracle Apps

    All our reports from Oracle Apps have been configured to print in duplex mode. But we want to disable this option. I came to know that this can be controlled by Printer Style. Can someone please elaborate on this?
    Thanks in advance for any help
    -MS

    Thanks Fadi and hsawwan for your replies. Actually it is not defined in the initialization string so it picks up whatever setting is there on the printer. Because we are using a common printer, we wanted to get out of this situation where the type of printing is controlled on the printer's side. Your suggestions helped, and now I am changing the current driver to forcefully print simplex and I am going to create a new driver in which I explicitly specify duplex, and this will be assigned to a new style which will be used only for prints requiring duplex. Is my approach right?
    One more clarification I need - after changing the driver, I need to restart the internal concurrent manager from within apps?
    Thanks
    -MS

  • Need to disable auto sync

    When I originally got itunes, I had it set to automatically sync when I connected my ipod. Now that I have an iphone, I do not want it to auto sync, but I can't find how to change that setting. How can I disable the auto sync in itunes for Windows (Vista)? Thanks.

    Look under Edit --> Preferences and then look up at the top of that window - there are a number of choices (General, Playback, Sharing, etc.) - click on Devices and then look down about halfway down the page - there is a place you can click to "prevent ipods, iphones ipads from syncing automatically" - hope that works for you.

  • Disable Auto-Mounting

    Hi Everyone,
    I have been searching forum after forum trying to find an answer to my question but am not having any luck. I have found one option but there has to be a better way. As I am taking a Computer Forensics major I need to disable auto-mounting of USB drives so I can manually mount the device with read-only options so I do not destroy evidence on drive I need to investigate.
    About 3 versions ago in Ubuntu I was able to just uncheck a box in the system settings so it would not auto-mount. Then they decided to get rid of that option because it was not compatible with changes they made to other parts of the system. So to get around the auto-mounting I found that I could shutdown hal, plug the drive in, issue my mount command, then finally restart hal so network manager and other services that needed it could run right. This seems kind of pointless to have to shut down hal and break things just so I can mount a drive. Since I recently left Ubuntu behind and converted to Arch I thought I would see if you guys had any ideas.
    I know I can add options to fstab but since I will get a different drive for every investigation this doesn't seem to be an option either.
    Any help you guys could offer would be highly appreciated.
    Thanks,
    Timn
    Last edited by Timn (2009-11-17 01:18:33)

    It is probably your window manager that does the auto-mounting, not arch. If it's gnome, there is a key in the gconf "/apps/nautilus/preferences/media_autorun" which you would need to disable. I do use FluxBox as a WM which does not do any mounting. These are the only window managers for which I can provide specific inforamtion. But no matte what you use, KDE, XFCE or something else, there should be a configuration that allows you to disable it.
    If that didn't help, please provide more specific information about your setup.

  • How to disable Save & Print functionality in PDF form?

    Hi,
    This is the requrement, client need to disable Save & Print functionality in PDF form. (They not allow employee save & print the hrforms payslip)
    May I know how to do it. Thank you.
    What is the parameter value in structure SFPOUTPUTPARAMS  that I need to set in order to  disable Save & Print functionality ?
    call function 'FP_JOB_OPEN'
        changing
          ie_outputparams = SFPOUTPUTPARAMS
        exceptions
          others          = 1.

    Hi Nayan,
    I'm the person who did the WD as well, using IFrame to contain the PDF binary. WD site didn't contro the binary source.
    I pre-define the 'FP_JOB_OPEN' before calling the PDF generation.
    Optional: Set output parameters
      gs_outputparams-nodialog  = ''.
      gs_outputparams-preview   = ''.
      gs_outputparams-getpdf    = 'X'.
      gs_outputparams-nopreview = 'X'.
      gs_outputparams-noprint   = 'X'.
      gs_outputparams-noarchive = 'X'.
      gs_outputparams-nopributt = 'X'.
      gs_outputparams-arcmode = '1'.
      gs_outputparams-noarchive = 'X'.
    Open print job
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = gs_outputparams
        EXCEPTIONS
          OTHERS          = 1.
    Regards,
    Eric

  • Disable Auto Orientation only in a specific frame!

    Hi there! 
    I appreciate if you please guide me with your experience in Mobile App design.
    My App contains 5 frames of data (movieclips), that each frame has 2 designs:
    1- Stand mode design    (portrait)
    2- Wide mode design     (landscape)
    So far it works great and I have published my App both on Google Play and Apple Store.
    Frames structure is as follows:
    frame   1            Loads External Data
    frames 2-6         Each frame contains 1 MovieClip designed based on mobile "Stand mode"
    frames 22-26     Each frame contains 1 MovieClip designed based on mobile "Wide mode"
    (Example: contents of frame 2 and 22 are the same, also 3 & 23 ... 6 & 26)
    (frame 2 is STAND design, 22 is WIDE design, and so on)
    In "Air Setting Dialoge", I have selected aspect ratio "Auto" and "Auto orientation".
    And I have this code in Frame 1 to do the rotation trick:
    stage.addEventListener(Event.RESIZE, resizeLayout);
    function resizeLayout(e:Event):void
                   setPosition();
    function setPosition():void
            //Phone turned from "Wide" to "Stand"
                   if (stage.stageWidth < stage.stageHeight)
                                  //App is now in "Wide" mode - means between frame 22 to 26
                                  if (currentFrame>20) 
                                                 //go to the same position of App but in "Stand" mode
                                                 gotoAndStop(currentFrame - 20);
                   else
                                  //Phone turned from "Stand" to "Wide"
                                  if (currentFrame<20)
                        //go to the same position of App but in "Wide" mode 
                         gotoAndStop(currentFrame + 20);
    Well, and finally my question:
    1- Is this way I have programed my App to rotate, a proper approach?!
          (in this way I can easily arrange objects on screen and also position them based on math calculations)
    2- If I want to disable auto rotation only when app reaches specific frames, what should I do??
       (for example I want the app Not to auto oriente in Frame 6 and 26., but it rotates in other frames)
    Hope it was not confusing and I cant wait to check out your valuable guidance!
    All the best and thanks a lot for your time.

    Hi there all!!
    Still I have no answer for my question No1, BUT I could find my answer to the 2nd question and here it is for your kind notice:
    Special thanks to Daniel Dura
    http://www.adobe.com/devnet/flash/articles/screen_orientation_apis.html
    I just added this code to my first Frame:
    stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, onOrientationChanging);
    function onOrientationChanging(event:StageOrientationEvent ):void
              if (currentFrame == 6 || currentFrame == 26)
                        event.preventDefault();

  • Disable all print apps, but still print thru email

    On my new HP Photosmart 6520 e-All-in-One printer, I want to disable all print apps, but not all web services: I still want to keep the ability to print photos and other files from all my devices thru email, as well as on my wireless LAN at home.
    Is there a way to do this without removing every print app individually?

    Hi,
    That can be done by removing each app indicidualy as listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&tmp_task=setupCategory&cc=us&dlc=en&lc...
    Other thean that, the only option to disable any of the print apps is to disable and re-enable the Web Services for your printer, however be aware that by performing a such you will need to select a different ePrint email address for your device as the current one will be locked for 6 months and will not be able to be used due to security reasons.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • What app do i need for my phone printer officejet pro 8500a

    what app do i need for my phone printer officejet pro 8500a

    Hi tiys,
    If you have a Android phone you can download HP home and biz app from the andriod market.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I am need to disable an auto start program on my iTunes on my mini Mac

    I am need to disable an auto start program on my iTunes on my mini Mac

    Is there a way to have itunes delete the WMA file after creating mp3 copy?
    No.  But after the MP3s are created and you are satisfied that things went OK, just delete the WMAs manually and say "Good Riddance."
    You can use an MP3 in multiple players, but you need to turn off any features that automatically change or move files, since one player will change something that messes up the other:
    In iTunes, that means go to Edit > Preferences > Advanced and uncheck "Keep..." and "Copy..." 
    In Windows Media Player, that means go to Tools > Options > Library, and uncheck everything that starts with a verb such as "Rename...," "Rearrange...," etc.

  • Unwanted faxes, Print Apps, Auto Printing. Manager Tools, Motley Fool

    Many HP printers are Web Enabled and can connect to the 'cloud' to receive content or ‘Print Apps’.  These Print Apps can be setup to be delivered on a Scheduled Delivery schedule.  Some customers are inadvertently signing up for this service and think that they are getting a fax or unwanted print app sent to their printer. 
    There are two ways that you may have signed up to receive this content. 
    1.  You can go to www.hpeprintcenter.com and login by creating an account, identifying your printer, and then selecting one of many print apps that will then appear on your printer panel.  You can then select a desired ‘Scheduled Delivery' for this app that allows your printer to automatically print selected print apps on a set schedule.  i.e. you could receive a news page, crossword puzzle, or article every morning at 7:00 am.
    2.  Web enabled printers have a few print apps located on the front panel out of the box and a customer can also initiate a print app to be delivered on a set scheduled from the front panel.  When any of these print apps are selected the customer is asked on the printer screen if they would like to subscribe to the print app.
    ***Some customers are either inadvertently selecting these print apps and subscribing to them without knowing or the printer is located in an environment where multiple users have access to the front panel of the printer and one user is selecting the print app while others may not.  Users who are unaware of how this Scheduled Delivery’s was set up will sometimes think that they are receiving a fax. 
    Methods of stopping a Scheduled Delivery Print App
    1.     From the printers front panel go to the 'Apps' section and scroll through until you find the desired print app.  Select the print app and then choose 'Pause' subscription.  This will pause the subscription until a user selects it again and 'resumes' printing.  If the print app is not visible on your printer it may have been removed, please go to method 2.
    2.  Go to www.hpeprintcenter.com and login to your account, create an account if necessary.  Go to the 'Apps' section and select the desired print app.  Select 'setup' and then 'update settings', at the bottom of the settings page you will see in blue text 'Cancel Scheduled Delivery'.
    If you are still having trouble with this issue just respond to this post.
    Thanks,
    I work on behalf of HP
    Although I am an HP employee my posts and replies are my own.

    It sounds like you are trying to make the change from the application on your computer.
    Instead, make the change directly on your printer.
    At the home screen on the printer, press the Apps Icon, then press the icon of the particular App you wish to cease printing, when you see Pause, then you need to press Pause to stop your subscription. You should then see Resume and OK. Don't press Resume as that will restart your subscription. Press OK, then your Home button (looks like a house, located around the outside of the control panel) to get out.
    Once you have pressed Pause you have stopped your subscription. You might receive one more issue but you shouldn't receive any more after that.
    I work on behalf of HP.
    Although I am an HP employee my posts and replies are my own.

  • How to deactivate/disable auto TO print-out for Storage bins and storage type in WH?

    Is there a way to deactivate auto printing of TO for some storage bins ? If yes then can you please tell me step by step configuration?
    If no then how can we deactivate auto TO printing for the Storage type ?

    Hello Manu,
    As I know it works entirely at storage type level, not storage bin level in WM. This is standard SAP default behavior.
    It is standard behaviour that printing settings in the warehouse are generally based on storage types and movement types
    Please check the user exits for transfer parameters.
    in RLVSDR40 -> MWMD0001   :  EXIT_RLVSDR40_001
    Print transfer orders (TOs)
    Check user exits MWMD0001 or MWMD0002, a detailed documentation via Transaction SMOD.
    Best Regards,
    R.Brahmankar

  • How can I disable auto-switching desktops?

    I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project.
    Like many users, I suspect, I use different desktops for different projects, each of which requires a variety of applications (finder, word docs, spreadsheets, etc). When I'm working on project 1 in desktop 1, I never want to be whisked away to desktop 2. In fact, I never want to be switched to a different desktop automatically. If I click on an application, I want it to open a new window for that application. If a new iteration of an app can't be opened (ie, Mail), I'd like it to pull Mail to me rather than send me off to it. Aren't apps supposed to come when we call, not the other way around?
    I have unchecked "...switch to a space with open windows of that application" in System Prefences, but my desktop continues to auto-switch, especially with Finder.
    In short: is there a way disable auto-switching entirely? I'd like to be able to assign windows and navigate manually without being constantly pulled away from the project I'm working on.
    Thanks for the help; I really appreciate people spending their time helping others on forums like this one.

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • How to disable click for open a app mobile? i have picture.

    how to disable click for open a app mobile?
    How i do?
    why adobe captivate need to click for open app.
    i need to open auto.
    thank you

    Swiping down from the midle of the screen will open the search window on its upper section.

Maybe you are looking for