Need to disable auto sms

Hi
Need to disable the auto forward of a single message to my 'contact list'. I have not done any change to the sysytem, except a change in my 'tariff plan'. Probelm triggered since then.
My contacts are telling that they are getting a same message, over and again.
Message starts as - Protect your Mobile with Mobitracker.
Then it gives some IMSI number as well as IMEI number.
Can somebody help me in disabling the same?

Although you would need to backup essential data, you could always reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Just wondered whether change of tariff has been recognised by MobiTracker as change of SIM causing it to send out alert.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Need to disable auto sync

When I originally got itunes, I had it set to automatically sync when I connected my ipod. Now that I have an iphone, I do not want it to auto sync, but I can't find how to change that setting. How can I disable the auto sync in itunes for Windows (Vista)? Thanks.

Look under Edit --> Preferences and then look up at the top of that window - there are a number of choices (General, Playback, Sharing, etc.) - click on Devices and then look down about halfway down the page - there is a place you can click to "prevent ipods, iphones ipads from syncing automatically" - hope that works for you.

Need to disable auto printing of "comics" app

Set up my new Office Jet pPro 8600 last weekend and have noticed that a comics app prints daily. I did not do anything to schedule this, yet the app shows that it will print daily at a certain time. I could use some advice on how to disable this, as I am not interested in wasting ink to print comics that I am not interested in reading.
thanks for any advice/help!
Brad

These kinds of apps are called "Scheduled Deliveries".
You can unsubscribe from them by
signing on to the eprintcenter at http://www.hp.com/go/eprintcenter
select your printer
scroll down to the "My Print Apps" section and you should see a list of apps. This would most likely have "comics" in the title in your case
Hover over the comics app and click on the "Remove" button in the upper right corner of the app icon.
You should no longer receive the comics.
I work for HP

Disable Auto-Mounting

Hi Everyone,
I have been searching forum after forum trying to find an answer to my question but am not having any luck. I have found one option but there has to be a better way. As I am taking a Computer Forensics major I need to disable auto-mounting of USB drives so I can manually mount the device with read-only options so I do not destroy evidence on drive I need to investigate.
About 3 versions ago in Ubuntu I was able to just uncheck a box in the system settings so it would not auto-mount. Then they decided to get rid of that option because it was not compatible with changes they made to other parts of the system. So to get around the auto-mounting I found that I could shutdown hal, plug the drive in, issue my mount command, then finally restart hal so network manager and other services that needed it could run right. This seems kind of pointless to have to shut down hal and break things just so I can mount a drive. Since I recently left Ubuntu behind and converted to Arch I thought I would see if you guys had any ideas.
I know I can add options to fstab but since I will get a different drive for every investigation this doesn't seem to be an option either.
Any help you guys could offer would be highly appreciated.
Thanks,
Timn
Last edited by Timn (2009-11-17 01:18:33)

It is probably your window manager that does the auto-mounting, not arch. If it's gnome, there is a key in the gconf "/apps/nautilus/preferences/media_autorun" which you would need to disable. I do use FluxBox as a WM which does not do any mounting. These are the only window managers for which I can provide specific inforamtion. But no matte what you use, KDE, XFCE or something else, there should be a configuration that allows you to disable it.
If that didn't help, please provide more specific information about your setup.

I am need to disable an auto start program on my iTunes on my mini Mac

I am need to disable an auto start program on my iTunes on my mini Mac

Is there a way to have itunes delete the WMA file after creating mp3 copy?
No. But after the MP3s are created and you are satisfied that things went OK, just delete the WMAs manually and say "Good Riddance."
You can use an MP3 in multiple players, but you need to turn off any features that automatically change or move files, since one player will change something that messes up the other:
In iTunes, that means go to Edit > Preferences > Advanced and uncheck "Keep..." and "Copy..."
In Windows Media Player, that means go to Tools > Options > Library, and uncheck everything that starts with a verb such as "Rename...," "Rearrange...," etc.

How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
I guess I'm looking for a script to disable this feature.

Anyone got any ideas?

How can I disable auto-switching desktops?

I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project.
Like many users, I suspect, I use different desktops for different projects, each of which requires a variety of applications (finder, word docs, spreadsheets, etc). When I'm working on project 1 in desktop 1, I never want to be whisked away to desktop 2. In fact, I never want to be switched to a different desktop automatically. If I click on an application, I want it to open a new window for that application. If a new iteration of an app can't be opened (ie, Mail), I'd like it to pull Mail to me rather than send me off to it. Aren't apps supposed to come when we call, not the other way around?
I have unchecked "...switch to a space with open windows of that application" in System Prefences, but my desktop continues to auto-switch, especially with Finder.
In short: is there a way disable auto-switching entirely? I'd like to be able to assign windows and navigate manually without being constantly pulled away from the project I'm working on.
Thanks for the help; I really appreciate people spending their time helping others on forums like this one.

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Disable Auto-Rotation in OCR Process (Acrobat 9 Pro)

Is there a way to disable the auto-rotation step as part of the OCR process? I have documents which I assemble in from images of tables. (If I had acces to the text of the tables, I wouldn't be using images of them). I place each screenshot in the correct orientation, but when I have Acrobat 9 Pro OCR the document, it auto-rotates many pages into the wrong orientation (some 90° clockwise; others 90° counterclockwise and some 180°). Since Acrobat is horribly confused by what it is seeing, I need to disable the auto-rotation part of the process so that it will OCR what it finds exactly as it finds it.

Very likely the pages of interest have a least one character of renderable text. This might not be readily seen by you or me but it'd be there.
Acrobat's OCR will not process a page that has any renderable text.
Be well...

Disabling auto-update doesn't work

I need to stop at Firefox 14 for now, and need to prevent auto-updates.
In Firefox 14.0.1 when I disable auto-update by setting 'never check for updates', and/or use about:config to clear 'app.update.url', both settings are ignored. When I close and re-open Firefox, auto-update is again enabled, and the update URL is again set.
Recommendations?

As it turns out, it's not a matter of 'preferences not being saved'.
It's Firefox spontaneously changing my preferences at start-time.
I've been testing; here's what i discover.
1. I install FF14, start it the first time, and disable auto-update (via Tools/Options/Advanced)
At this point - prefs.js in my profile now starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
2. now I exit FF.
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
3. i restart FF (#1)
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
4. i close FF
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
5. I restart FF (#2)
NOW prefs.js has dropped those 2 initial lines, and starts with user_pref("app.update.lastUpdateTime.addon-........etc
Firefox is spontaneously changing my prefs.js.
Before this series of tests I adjusted the prefs.js in all other profiles in this XPSP3 machine to start with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
This is obnoxious.
I expect better from Mozilla.
Suggestions?

[SOLVED] Alsa: How to disable auto-mute when plugging in headphones?

I have a set of headphones plugged into my workstation permanently (the headphone jack is hard to reach so I don't want to plug those headphones in and out) as well as some speakers. Jack sensing works perfectly - when I unplug the headphones, the speakers are unmuted and when I plug the headphones back in the speakers are muted. Now as I said, my headphones are plugged in permanently and occasionally I want to have sound on the speakers at the same time. So far I have not found a way to have both headphones and speakers unmuted simultaneously.
I originally thought this was a problem with Pulseaudio (I am using Cinnamon as my desktop) but when I directly go to the Alsa hw device I get exactly the same behavior. The sound chip is a built-in VIA VT1818S and aplay displays the correct cards and devices:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: VT1818S Digital [VT1818S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 2: VT1818S HP [VT1818S HP]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I verified with "mpg123 -a hw:0,0" that I get no sound on the speakers when the headphones are plugged in and vice versa. I tried a lot of different settings with alsamixer and amixer to no avail. These are my current settings:
$ amixer -c 0 contents
numid=42,iface=CARD,name='Front Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=44,iface=CARD,name='Front Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=46,iface=CARD,name='HDMI Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=45,iface=CARD,name='Line Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=40,iface=CARD,name='Line Out CLFE Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=38,iface=CARD,name='Line Out Front Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=41,iface=CARD,name='Line Out Side Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=39,iface=CARD,name='Line Out Surround Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=43,iface=CARD,name='Rear Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=47,iface=CARD,name='SPDIF Phantom Jack',index=1
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=37,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=36,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=23
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='Headphone Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=12,iface=MIXER,name='PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=11,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=28,iface=MIXER,name='Front Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=24,iface=MIXER,name='Front Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=23,iface=MIXER,name='Front Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=2,iface=MIXER,name='Front Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Front Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=4,iface=MIXER,name='Surround Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Surround Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=6,iface=MIXER,name='Center Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=5,iface=MIXER,name='Center Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='LFE Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=7,iface=MIXER,name='LFE Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=26,iface=MIXER,name='Line Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=25,iface=MIXER,name='Line Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=16,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=18,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=15,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=14,iface=MIXER,name='Loopback Mixing'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=35,iface=MIXER,name='IEC958 Default PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=31,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=32,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=33,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=34,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=30,iface=MIXER,name='Dynamic Power-Control'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=29,iface=MIXER,name='Independent HP'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'OFF'
; Item #1 'ON'
: values=0
numid=19,iface=MIXER,name='Input Source'
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Rear Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'Stereo Mixer'
: values=1
numid=20,iface=MIXER,name='Input Source',index=1
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Rear Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'Stereo Mixer'
: values=0
numid=27,iface=MIXER,name='Rear Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=22,iface=MIXER,name='Rear Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=21,iface=MIXER,name='Rear Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=23,23
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=10,iface=MIXER,name='Side Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=9,iface=MIXER,name='Side Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=49,iface=PCM,name='Capture Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=50,iface=PCM,name='Capture Channel Map',index=1
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=48,iface=PCM,name='Playback Channel Map'
; type=INTEGER,access=r----R--,values=8,min=0,max=36,step=0
: values=0,0,0,0,0,0,0,0
| | TLV size error (257, 8, 0)!
numid=51,iface=PCM,name='Playback Channel Map',device=1
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=52,iface=PCM,name='Playback Channel Map',device=2
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
If I read the Alsa kernel docs right, the VIA driver simply does not provide any option to disable auto-muting: http://git.alsa-project.org/?p=alsa-ker … xt;hb=HEAD.
I would be glad if I had misread/misunderstood something or there were any other means of achieving what I am after? All I found so far is lots of posts where auto-muting did not work but very few people seem to want the opposite. FWIW, my old installation of Ubuntu 11.10 was working fine in that regard, i.e. it probably did not support auto-muting for my hardware.
Last edited by fax (2013-03-24 20:20:19)

Solved, well, good enough for me anyway. In alsamixer, I enabled "Independent HP". Independent HP means that two of the six surround channels get diverted to the headphones. Alsa creates a second device, one for line out and the other one for the headphones. It is a very neat feature that is meant to allow you to e.g. do a voice call with your headphones while you play music through the speakers at the same time. I can now choose in PulseAudio whether I want output to my headphones or the speakers. It required that in /etc/pulse/default.pa, I added the line "load-module module-alsa-sink device=hw:0,2" after this paragraph:
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
# Take Independent HP into use.
load-module module-alsa-sink device=hw:0,2
All this really is a work-around for two bugs:
Call it a bug or a missing feature, but it does not look like the Alsa snd_hda_codec_via driver allows to disable auto-muting.
Before the change to default.pa, PulseAudio already allows me to switch between two output devices - "analog output" and "analog headphones". "Analog headphones" however does the same thing as "analog output" and plays sound on the external speakers and not the headphones. I suspect that the PulseAudio module-udev-detect detects both Alsa devices but wires them wrongly.
The above still doesn't give me what I originally asked, i.e. sound on both speakers and headphones at the same time, but I realized that I don't really need that. I just need a way to switch on speakers occasionally while my headphones are plugged in.
Last edited by fax (2013-03-24 23:06:27)

Cannot disable Auto Tone on import of PSD files - ruins edits !!

Hi - I am a LR 5 expert and we have an issue with the latest release that I need to overcome or it is unusable.    Please direct this to an expert level support person as I have already networked around and have not been able to resolve this issue.    The issue is consistent with other users as well - we have tried this on several computers and the result is the same.     It is possible that is pilot error but I doubt it - we have disabled apply auto tone everywhere we could find it...
I believe this is a serious bug in the way LR handles files on import - and I am also hoping there is an immediate work-around as the issue has TRIPLED our workflow time.
Example #1   -   Edit DNG - Export as PSD with "add to catalog" checked - LR exports the file and then imports the PSD,   but in doing so applies auto tone and destroys all the edits. The re-imported images are too bright and too contrasty.       Auto tone on import IS disabled.
We tried to work around the issue by trying to edit outside LR and re-importing but that does not work either -SAME RESULT !
Example #2 -   Edit DNG files, export to PSD, do not check "add to catalog" - make the edits needed in Photoshop, then import using "add" and LR applies Auto Tone once again destroying all edits.      You can actually watch the auto tone being applied to the thumbs as it imports them. - they get brighter.
In all cases the edited images end up too bright and too contrasty and are otherwise unusable.        Our workaround is to export to PSD, edit in photoshop, then use Photoshop's   scripts to produce the final images and leave the PSD files out of the catalog - this has added a TON of time to our workflow and has corrupted our file management - UNACCEPTABLE !!
We have also tried reading the external meta data option - same result - bright files.
Please let us know how we completely disable auto tone on import and fix this issue it is a deal breaker for using this version.   We are using LR 5.6
Thanks, Mark
Head Janitor, 6IXGUN.COM

Looks like we solved our own problem -   either edit or delete the preferences files and restart lightroom. If you delete it, it will of course wipe our your template settings, etc but that was far less of a hassle than not being able to use LR with PSD / exporting. We were able to make a simple edit and it was fixed.   Also make sure you have unchecked "apply auto tone" in the >preferences>presets   dialog box - we did not have it checked but it WAS enabled in the plist file.       I would definitely consider this a bug - the issue was not present in the last version of LR, it was introduced upon installing 5.6.

To Disable Auto Print In ME29N or ME28

Dear Gurus,
I gave auto print option in Po.Now my client wants to disable that,i disable in ME23N but i dont know how to disable auto-print in ME29N and ME28. Is there any configuration available or i need to do that with a programmer.
Plz Explain.
Thanks in adv.............

I think in your PO process it is not printing because the PO is subject to release strategy
the release in ME29N does not have a own message determination.
the only thing what happens is that the release "erases the print lock".
if your message record in the PO has the setting to print immediatly (4) , then it prints when ME29N is saved.
if your message recoprd in the PO has the setting 3, then it prints when you execute ME9F
This is totally dependend on your message condtions.
Of course a change in your message conditions will only effect POs that are created after this change, Unreleased existing POs are not effected and will print with the old settings (because the message record already exists in the PO)

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom

Cannot Disable Auto-Rotate on Twist s230u

I want to completely disable the screen auto-rotation on my Twist s230u and prevent it from re-enabling at all. The only modes I use it in are tablet mode or laptop mode, so I have no use for this. Is there a way to do this?
The checkbox under the Screen Resolution section of Display Properties doesn't seem to do jack. The screen still rotates when this is unchecked. I've also rolled back the driver of the Lenovo PM Device from 1.67 to 1.66 as per this thread. Can't say I've noticed a difference after this either.
Any other ideas? Thanks.

Dear Redv
Welcome in lenovo forums
All what you need to Disable the auto Rotate Screen is to press on the highlighted button as shows below :-
- There is anotification massage will be dispayed to confirming that the auto rotate disabled
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Disable auto update

Hi
I have a couple of databases running on Azure SQL. They all are the Basis Edition.
I'm experiencing that two of these databases keep being upgraded to Web Edition. When I scale them down to basis edition or even Standard S1 edition, one of them gets auto scaled to Web Edition.
I don't know why this occours and I would like to have it stopped. I'm not sure as to whether there is a disable auto update functionality at manage.windowsazure.com. Neither am I sure if there is some setting in my ASP.NET Web.Config that will do the trick.
Help would be appreaciated.

Hi adksmm,
Usually, in SQL Azure database platform, we can change service tiers using Azure Management Portal, PowerShell, or T-SQL statement, or REST API . If you want to modify a database via T-SQL statement in SQL
Azure database, you must be connected to the master database to alter a database. If MAXSIZE is set to a value of 1 GB or 5 GB and EDITION is not specified, the database edition will automatically be set to Web Edition. For more information,
see: http://msdn.microsoft.com/en-us/library/ff394109.aspx
If you choose downgrade to a lower service tier via Azure Management Portal, you need to manually change the edition options, performance level via GUI. In addition, if you can write Azure PowerShell command to
specify the service tier, the performance level, and the maximum size for the database. However, there is no auto update functionality or option for you disabling them at SQL Azure database platform. For more information about changing
database service tiers and performance levels, you can revies the following article.
http://msdn.microsoft.com/en-us/library/azure/dn369872.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Need to disable auto sms

Similar Messages

Maybe you are looking for