Need to Disable field in Table maintenance generator

Hi Frds,
I have created a custom table .But i stuck at one point. In the TMG one field is User ID and next field is filled with Full name of this User ID(made it noneditable). To get user name i implement '01' event in TMG. and its working fine. But when i change the user ID in the row ramdamly the user name is not updated. its because Event not trigger.
Please help me by giving valuable suggestion either of two query.
1) When any row field value get change. Which TMG event trigger and capture the changed row
2) How can i make field disable once it get filled and saved.
Thanks
Imran

Hi,
When you create any entry in TMG event get occurred is 05 and if you are changing any row content than you have to use 01. And if you want to disable fields ,double click on overview screen number which is you have given when you created TMG and than it opens flow logic of screen than click on Element List tab and uncheck the fields which you wants dsiable in input column as i am attaching screenshot have a look at it.
in this user ID is unchecked.
Regards,
Shahezad

Similar Messages

Disabling fields in table Maintenance generator

Hi Experts,
I would like to restrict some fields in table maintenance generator dynamically/ statically.
Here is the situation.
I have generated table maintenance for the table ZMARA and I have created three transactions for the above single table maintenance generator.
i.e .. Transaction      ---        Table
          ZT1                  ---         ZMARA
          ZT2                  ---          ZMARA
          ZT3                  ---          ZMARA
I am using above three transactions in my module pool program. Based on the certain conditions I am calling different transactions i.e ZT1, ZT2, etc
Here is my requirement:
Suppose if I call ZT1 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZPRODH.
or remaining fields should disable. User should not allow to change the content, even if it is new entries/existing entries. only ZMATNR, ZMTART, ZPRODH.
Suppose if I call ZT2 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZHTSCODE
How can we restrict dynamically when you call table maintenance generator table through transaction
or
How can we generate table maintenance for few fields?
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:28 PM

Hi ,
go to Se11->Table maintenace generation. Double click on screen to edit and assign the field you want to display/hide to groups. In PBO , after the following lines..
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMARA                         CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
ENDLOOP.
Write a new module in PBO and edit the SCREEN as per the Tcode, you are calling,,'
Hope this helps you
Rj

How to disable some of the table fields in Table Maintenance Generator

HI,
I am creating one table which contains 10 fields.
But i wanted to disable some 2 fields in Table maintenance generator.
So can any one plz tell me how to disable those 2 fields.

Generate a maintenance view for the table,
Goto- Table/Join Conditin Tab-- Put the name of your table
Goto-viewfield tab--- Put the fields whatever you required.
Then generate table maintenance for the view created.
pls chk
Thanks
Anurag

How to hide fields in table maintenance generator dynamically.

Hello Experts,
                     I have one requirement and that needs to do dynamically display the fields in table maintenance generator based on the selected radio button.I have written the code in pbo but it is not working properly,can anyone figure me out in this.
Thanks,
Vinod Bhaskar.

Hi vinod
     when you are creating tmg , you will specific a function group name and sap generate a func group which contains that tmg . you can view in se80 , specifying function group name. In that , screen contains single screen 100 or two screen 100,200 .
     screen you can create module in pbo .u can find all field name in that screen.
    loop at screen.
   if screen-name = ''.
   screen-visible = 0.
   endif.
   modify screen.
   endloop.
regards,
vijay.

Search Help for field on table maintenance generator ECC 6.0

Hi All.
To maintain search help for a custom field on table maintenance generator.
Only through coding.
Cannot use domain or data element or table field search helps.
Have to code only.
Is there any way?
Can I do modifications/additions to screen code and achieve this?
Regards,
Veeranji Reddy P.

Scenarion:
1. table with 2 fields.
2. table maintenance generator.
3. Function group with one screen(0001-mentioned in table maintenance) created.
4. For one field on table maintenance generator...where we add new entries to table, i want a search help.
Conditions : only coding has to be done..no search helps I can use.
Coding where and what?
one option is to code on the screen 0001- either in PBO/PAI.
Is it a rite place...? or any other option? But no search helps as mentiond in my first message can be used.
Thanks and Regards,
Veeranji Reddy P.

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

Validating non key fields in table maintenance generator

Hi,
I ma using events for table maintenance generator event 05 ,there i want to validate non key fields ......i am throwing error message ....all the non key fields are getting in display mode ...i need them to enable to enter values ....
please suggest
Thanks,
Shailaja Ainala.

Hi Shailaja,
Its property of error message, which makes it as non-editable.
You can display either status or info message after validation check.
And finally before saving (before save event) display error message, so that it invalid entries doesnt get saved.
Thanks,
Nisha Vengal.

In disable fields in table maintenance

Hi,
In table maintenace I have done with save user id and last changed date. Now I need to make this fields disable(in gray), means no it should not be edited manually in table maintenance. It should only pick up the system.
if any one have code for this and also in which maintain event i need to do this, please post me.
Thanks in Advance,
Ravi

hi,
in SE80
goto Function Group
then click on Screen
then click on Element List Tab
below u can see list of ur fields strting with ZTT-......
and against that u can have to uncheck the checkbox in INPUT column ......
so that the input for the field will be disabled..... when u go in edit mode......
if any query revert back........
reward points if useful.......:-)
and mark the post answered once ur problem is solved ....

Max nos of fields in table maintenance generator screen

Hello,
Is there any restriction on the number of colums(fields) to be displayed in the screen of table maintenance?
Actually, I am having a Ztable with some 100 fields and when I generate the table maintenance using Single Screen, it give me error for dynpro creation. But it works with 68 or less fields.
Can anyone help me out in this?
Thank You.
reg,
Pankaj

Hi,
you can change your table:
if your table is like glt0 or lfc1,
you can assign month to key of the table :
FIELD     KEYFLAG
MANDT     X
BUKRS     X
GSBER     X
GJAHR     X
WAERS     X
MONAT     X "<-
WRBTR
Andreas

Currency field in Table maintenance generator

Hi,
I have created a table with fields amont and currency..When I create generate the table maintenance for this table I am not able to see currency and amounts field on the generated screen. Please do help me whats missing from my end.
raghu

make the foriegn key for the currency TCURC
This was for those whose currency keys are not maintained
Resaon might be the Currency is not maintained in the table TCURC
they can be maintained in SPRO
SAP Netweaver - > General Setting - > Currencies - > Check Currency Codes
Regards
- Gopi

Addition of a new column in Table Maintenance Generator

Hi All,
I have a requirement in which I have to include a new field in Table Maintenance Generator . This field is not present in the table but its data will be fetched from another table . Pls help me in this regard.
I have little idea of Table control .
Regards,
Nibha

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

Event code in table maintenance generator

Hi All, Need to call event in Table maintenance generator of the z table. I have to use 1st event (Select ’01’ – Before saving data in the database). Need to do fallowing job: Table cleaning : Delete all records with value year =< 2011 -New rule : No save can be done with value (Pst Var, PA,PSA, Cost = ‘ *,*,*,*’). I am attaching table entry with this mail, I have written the code for this but not sure please suggest me modification if required for this.Because i have never done this before. Thanks and Regards Sankil

hi Sankil
Some variable is not available in your code and you did not modify EXTRACT table.
Try to modify your code as blow:
This event has no standard routine. The following global data is available for the realization of the user routine:
•internal table TOTAL
•field symbols
•field symbols <ACTION> and <ACTION_TEXT>
•<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table
TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM
refer event 01: http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
regards,
Archer

Junk Amount Values in Table Maintenance Generator

Hello All,
I have created an event (01) in table maintenance generator. In this i am triggering a workflow.
The problem here is, in my table there is a fields of type CURR and CUKY. I am inserting new values by using SM30. I am entering some 100 dollars against CURR filed. In the bebugging, i have observed there is Junk values against CURR field in TOTAL & EXTRACT tables. Becuase of that i am getting short dump. I just want to pass the amount value to my workflow not a Junk amount value.
Is there any way to avoid the junk values for CURR fields in Table Maintenance Generator.
Regards,
Pati

Hi Pati! Do you've solve this? Any help? I see junk amont value too, and I cannot understand this.
Thanks on advance.
Regards,
Emanuel

How to disable a field in the table maintenance generator of a table

dear experts,
i have created a table with 2 fields A ,B . i had created table maintenance generator for the table. i am entering the values for the table through table maintenance generator . for filed A i had given dropdown list which contains only 2
entries YES & NO. my requirement is if i select YES in field A , field B should be in enable mode(it must take some input), if i select NO in field A, field B should be in disable mode ( it should not take any input).
kindly help me....
thanks & regards
krishna

Hi Krishna,
A further to the above, you can go to SE11 and in the table maintenance generator click on
Fn.Gr.Text button, then go to Main program.
Here you will see "User-defined Include-files (if necessary). "
Just uncomment the PAI include and put your code..to make the field editable or un-editable.
To do that you might have to go to the screen painter and change that screen, to include those fields in a group or something, so that you can control them better.
Regards,
Sameer

Field validation in table maintenance generator and input value grey out.

i have created ztable with 3 fields as em_no,em_no and addrnumber.
first two fields are custom fields but the third custom field need to validate the standard table adrc contains the value of the field addrnumber.
i need the query of field validation query which we write in create entry events in table maintenance generator and also if we give wrong value for addrnumber in sm30 maintain table, the input field need not to be grey out for next entry...
please help.

Hi,
create method -
>before saving data.....write the logic between the method
go to utilities->table maintanance ,,,after creating generator ---go to envirnment->modification->events.
create event -.>.as zsave select event type 1(before saving data to table) write code in include....
consider data for field3 is 10 .
lv_new = ztbr(table name)-field3.
select field3 from ADRC(ZTABLE) into wa_new (TYPE ZTABLE) where field3 = lv_new.
if sy-subrc = 0.
     working fine
     else.
    message i888(sabapdocu) with 'data invalid'.
endform.
This will help u...
Thank u.........

Need to Disable field in Table maintenance generator

Similar Messages

Maybe you are looking for